JBL Tune 660NC - Noise Cancelling Headphones Quick Start Guide

WHAT'S IN THE BOX

POWER ON & CONNECT

MANUAL PAIRING

BUTTON COMMAND

MULTI-POINT CONNECTION

* (MAXIMUM 2 DEVICES)

1. To switch music source, pause the music on the current device and select play on the 2^nd device.
2. Phone call will always take priority.
3. If one device goes out of Bluetooth range or powers off, you may need to manually reconnect the remaining device.
4. Select "Forget this device" on your Bluetooth devices to disconnect multi-point.

CHARGING

LED BEHAVIORS

TECH SPEC

Model: TUNE660NC

Driver Size: 32 mm / 1.26 " Dynamic Driver

Power supply: 5 V 1 A

Weight: 166 g / 0.366 lbs

Headset battery type: Polymer lithium-ion battery (610 mA / 3.7 V)

Charging time: < 2 hrs from empty

Music playtime with BT on: up to 55 hrs

Music playtime with BT on and ANC on: 44 hrs

Music playtime with AUX and ANC on: 35 hrs

Frequency Response: 20 Hz – 20 kHz

Impedance: 32 ohm

Sensitivity: 100 dB SPL @ 1 kHz / 1 mW

Maximum SPL: 96 dB

Microphone sensitivity: -42 dBV @ 1 kHz / Pa

Bluetooth version: 5.0

Bluetooth profile version: A2DP 1.3, AVRCP 1.5, HFP 1.6

Bluetooth transmitter frequency range: 2.402 GHz – 2.480 GHz

Bluetooth transmitter power: < 10 dbm

Maximum operation temperature: 45°C

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download JBL Tune 660NC - Noise Cancelling Headphones Quick Start Guide