Sealey APWSR01 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instructions gloves
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using this rack.
‰
Locate in a suitable area where it will not be an obstruction.
9
Keep the general area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Mount on a flat and solid wall such as breeze block that is strong enough to hold fully laden rack.
‰
The rack should be firmly secured to the wall in a suitable location.
9
Although a generic fixing kit has been provided please ensure suitable fixings are used for the type of wall you intend to mount this
9
shelf.
DO NOT attempt to wall mount the rack on your own. Obtain assistance or use manual handling equipment.
8
Wall mount the rack at such a height that minimises the risk of injury when used.
9
Keep children and unauthorised persons away from the storage area.
9
DO NOT use the rack for any purpose other than that for which it is designed.
8
DO NOT site the rack out of doors.
8
DO NOT get the rack wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the rack with any solvents or abrasives which may damage the coated surface.
8
DO NOT overload the rack.
8
Ensure that the rack is properly and firmly assembled and installed before loading it.
9
2. INTRODUCTION
Heavy-duty wall mounted storage rack ideal for workshops, garages and warehouses. Features sturdy steel construction and supplied with
hardware pack. Suitable for storing a large variety of items with weight capacity of 100kg. Overall size: 1218 x 600 x 650mm.
3. SPECIFICATION
Model No.: ............................................................ APWSR01
Capacity: ...................................................................... 100kg
Overall Size (W x D x H): ......................1218 x 600 x 650mm
4. CONTENTS
© Jack Sealey Limited
HEAVY-DUTY WALL MOUNTED STORAGE RACK
APWSR01
MODEL NO:
Original Language Version APWSR01 Issue 1 15/11/22