Descaling - Samsung DF60 8 Series User Manual

Cleaning and maintenance

Descaling

Perform descaling regularly to increase the performance and lengthen the lifespan of
the product. If you do not perform descaling immediately after getting the notification
message, some functions may be restricted for use and may cause performance decrease
or even shortens the lifespan of the product.
1. When the Descaling Required message appears on the display, remove all items from
the product and then tap and hold Sanitize and Dry for 3 seconds.
2. Empty the supply and drain tanks.
3. Dilute a descaling agent with water as recommended by the manufacturer.
4. Fill the Refill Tank with the diluted descaling agent up to the MAX line.
5. Tap and hold Start/Pause
- If the Empty Water message appears on the display during descaling, empty the
drain tank.
6. When the Refill/Drain the tank message appears on the display, empty both supply and
drain tanks and then rinse them thoroughly.
7. Fill the Refill Tank with clean water up to the MAX line, and then insert the supply and
drain tanks.
8. When Supply/Drain Complete message appears on the display, tap and hold Start/
.
Pause
- If the Empty Water message appears on the display during descaling, empty the
drain tank.
9. When descaling is complete, empty the drain tank and fill the Refill Tank with water.
- You can use AIRDRESSER once you finish all these steps.
NOTE
• Vibration and noise may occur during the descaling process; this is normal, and there is
no problem with the product.
• You may see the Fill Water message when you use the product the first time after
descaling. This is normal. Fill the Refill Tank with water and press Start/Pause
resume.
• Bubbles may form if the descaling agent is not rinsed thoroughly. Make sure to rinse
the supply and drain tank thoroughly after descaling.
46 English
to start descaling.
to