Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NI PXIe-8245
Summary of Contents for NI PXIe-8245
- Page 1 PXIe-8245 Getting Started 2023-04-03...
-
Page 2: Table Of Contents
Troubleshooting............. 7 What Should I Do if the PXIe-8245 Does Not Appear in MAX?....7 Where to Go Next. -
Page 3: Getting Started Guide
Getting Started Guide This document describes how to install and configure the necessary hardware and software components to begin using the PXIe-8245. You need the following items to set up and use the PXIe-8245. PXIe-8245 GigE interface device ■ Ethernet cable ■... -
Page 4: Pxie-8245 Kit Contents
PXIe-8245 Getting Started Guide (this document) ■ PXIe-8245 Safety, Environmental, and Regulatory Information ■ Preparing the Environment Ensure the environment in which you are using the PXIe-8245 meets the following specifications. Operating environment Ambient temperature range 0 °C to 55 °C... -
Page 5: Installing The Application Software And Driver
2. Install LabVIEW (optional). Installing the PXIe-8245 Notice To prevent damage to the PXIe-8245 caused by ESD or contamination, handle the module using the edges or the metal bracket. 1. Ensure the AC power source is connected to the chassis before installing the module. -
Page 6: Confirming The Device Is Recognized
1. Select Start » All Programs » National Instruments » Measurement & Automation Explorer to open Measurement & Automation Explorer (MAX). 2. Verify that the PXIe-8245 appears under My System » Devices and Interfaces. Front Panel The following figure shows the PXIe-8245 front panel. -
Page 7: Troubleshooting
PXIe-8245 Getting Started Figure 1. PXIe-8245 Front Panel PXIe-8245 1000BASE-T The PXIe-8245 provides four standard Gigabit Ethernet ports (Port 0 to Port 3). Table 1. Ethernet LED Status Definitions Status Definition Activity/Link Unlit No link Green (Solid) Linked Green (Blinking) -
Page 8: Where To Go Next
4. Navigate to the Device Manager. Right-click the Start button, and select Device Manager 5. Verify the PXIe-8245 appears in the Device Manager. 1. Under an NI entry, confirm that a PXIe-8245 entry appears. Note If you are using a PC with a device for PXI remote control system, under System Devices, also confirm that no error conditions appear for the PCI-to-PCI Bridge. -
Page 9: Ni Services
NI product. Product registration facilitates technical support and ensures that you receive important information updates from NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX, 78759-3504, USA. © National Instruments © 2023 National Instruments Corporation.
Need help?
Do you have a question about the PXIe-8245 and is the answer not in the manual?
Questions and answers