Panasonic BT-LH1760W Operating Instructions Manual page 25

Main Menu
(continued)
■ Functions displayed during FUNCTION button operation
Pressing any of the [FUNCTION1] to [FUNCTION5] buttons displays the operations assigned to each button as
shown below.
• HV DELAY
DELAY OFF/V DELAY/H DELAY/HV DELAY
• AUTOSETUP
AUTOSETUP/COMPLETE/INCOMPLETE/NOT
RGB-COMP.CH
• BLUE ONLY
BLUE ONLY ON/BLUE ONLY OFF
• GAMMA SELECT
GAMMA STANDARD/GAMMA FILM/GAMMA
STDIO/PST
• SD ASPECT
4:3/16:9
• SCAN
NORMAL SCAN/UNDER SCAN
• SUB WINDOW
SINGLE/FULL/PART/STILL
• WFM/VECTOR
WFM ON/WFM/VECTOR OFF/VECTOR × 1/
VECTOR × 2/VECTOR × 4/VECTOR × 8
■ "HV DELAY"
This displays the blanking period. Each press of the button changes the display as follows: H blanking display
V blanking display
■ "SUB WINDOW"
Opening the "SUB WINDOW" function splits the screen (main window) in two as shown below to enable
comparison of a recorded still image with live video.
Use the "SUB WINDOW" setting (FULL, PART) in the "SYSTEM CONFIG" menu (
function as shown below.
Press the button ([FUNCTION1] to [FUNCTION5] (
assigned to turn the function on and off. (This assumes that the "SUB WINDOW" function has been assigned to
any of the [FUNCTION1] to [FUNCTION5] buttons.)
To setup "IP MODE" (
• FULL
Resizes the main window to also display a second window (two sub-windows).
Press the FUNCTION button to which the SUB WINDOW function has been assigned.
Normal window
(main window)
Video
H and V blanking display
page 20), exit the "SUB WINDOW" function first.
Press the
button again
• MARKER
MARKER OFF/4:3 MARKER/13:9 MARKER/14:9
MARKER/VISTA MARKER/CNSCO MARKER/95%
MARKER/93% MARKER/90% MARKER/88%
MARKER/80% MARKER/MARKER ON
• PIXEL TO PIXEL
• PIXEL POSITION
CENTER/LEFT TOP/LEFT BOTTOM/RIGHT TOP/
RIGHT BOTTOM/PIXEL TO PIXEL OFF
• AUDIO LEVEL METER
METER OFF/METER 2CH/METER 4CH/METER
8CH
• CROSS HATCH
CROSS HATCH HIGH/CROSS HATCH LOW/
CROSS HATCH OFF
• MONO
MONO ON/MONO OFF
• TIME CODE
LTC/VITC/LUB/VUB/TC OFF
• CLOSED CAPTION
CC1/CC2/CC3/CC4/CC OFF
no blanking display.
page 23)) to which the "SUB WINDOW" function has been
Before image input
(two sub-windows)
Video Video
page 22) to set up the
After image input
(two sub-windows)
Press the
button again
Still image Video
25