Panasonic Toughbook CF-C1ADAAZ6M Operating Instructions Manual page 17

Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-
count name) that includes the "@" mark, a password will be requested at the
log-on screen, even if no password has been set. If you try to log on without en-
tering a password, "The user name or password is incorrect." may be displayed
and you will not be able to log on to Windows (
The input panel is displayed on "Welcome to the Windows XP Setup Wizard".
Move "Welcome to the Windows XP Setup Wizard" and make sure that the
"Welcome to the Windows XP Setup Wizard" and the input panel do not overlap.
You cannot choose the following words for user name and password: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
When you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard or touch pad, and wait
until the screen changes.
If "An unexpected error has occurred ..." (or a similar message) is displayed,
click [OK]. This is not a malfunction.
6 Perform the screen calibration.
NOTE
Perform the following calibration for each user.
Rotate the display to primary landscape before performing the calibration.
<Only for model with digitizer>
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
B Click [Calibrate].
C Click [Pen input].
D If [User Account Control] is displayed, click [Yes].
E Using the digitizer pen, touch each of the "+" target marks one by one, and then click [OK].
F Repeat steps A and B.
G Click [Touch input].
H If [User Account Control] is displayed, click [Yes].
I Using the fi nger, touch each of the "+" target marks one by one, and then click [Yes].
A Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and
Pen Settings].
B Click [Calibrate...].
C Click [Pen].
D Using the digitizer pen, touch each of the "+" target marks one by one and
then click [OK].
E Repeat steps A and B.
F Click [Touch].
G Using the fi nger, touch each of the "+" target marks one by one, and then
click [Finished].
<Only for model with touchscreen>
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
B Click [Calibrate].
C If [User Account Control] is displayed, click [Yes].
D Using the stylus, touch each of the "+" target marks one by one, and then click [Yes].
A Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and
Pen Settings].
B Set the following with [Calibrate] in [Settings].
C Using the stylus, touch each of the "+" target marks one by one, and then click [Yes].
7 Create a new account.
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
page 28).
17