Starting The Setup Utility - Panasonic Toughbook CF-52EKMBGAM Reference Manual

Setup Utility
You can make the settings of the computer's operating environment (password settings, startup drive selection, etc.)

Starting the Setup Utility

1
Turn on or restart the computer.
2
Press or
F2 Del
the startup procedure.
When [Enter Password] is displayed, enter your password.
When you start the Setup Utility with Supervisor Password
You can make the settings of all items of the Setup Utility.
When you start the Setup Utility with User Password
Note the following:
• In the [Advanced] and [Boot] menus, you cannot make the settings of all items.
• In the [Security] menu, you can change only the User Password when [User Password Protection] is set to
[No Protection]. You cannot delete the User Password.
• In the [Exit] menu, you cannot make the setting of [Load Default Values] and [Boot Override].
• F9 (Setup Defaults) does not function.
NOTE
The [Panasonic] boot screen may not appear when only the external display is being used. In this case, as soon as the
computer starts up, press F2 or Del several times and start the Setup Utility.
while [Panasonic] boot screen is displayed soon after the computer starts
79