Kit Contents; Operation - niteo GEDST0363-21 Instruction Manual

Below elements should be found in the set:
QUANTITY
1
2
1
Open the packaging and carefully take the device out . Make sure that the kit is complete and its components
are undamaged. Check that plastic parts are not broken. If you find that any components are missing
or damaged, contact the vendor and do not use the device. Retain the packaging or dispose of it in accordance
with local regulations .
Caution! To keep children safe, do not leave packaging parts (plastic bags, cardboard boxes,
expanded polystyrene elements etc.) freely accessible. Danger of suffocation!
8.1 Turning the device on / off
8.2 Battery replacement / installation
1 . Turn off the device (see 8 .1 Turning the device on / off)
2 . Unscrew the bolt and open battery compartment (9)
3 . Remove the used batteries (if any) and insert two new 1,5V AAA
polarity (as shown) .
4 . Close the battery compartment cover (9) and tighten the screw .
Caution!
• The device is designed to be used with AAA 1,5 V
• The batteries are included in the set.
• When installing a new battery, observe the polarity markings in the battery compartment.
• Use the same type of batteries as recommended for this device: AAA 1.5 V
• Do not dispose of used batteries with municipal waste. Put them into special containers for spent
batteries.
22
COMPONENT
Multifunctional laser ranges
AAA 1,5 V battery
Instruction manual
• To turn on the device, press and hold the MEAS measurement
button .
• The laser measuring device is turned off by pressing and holding
the CLEAR reset button and device power off switch (4) .
• The laser rangefinder has an automatic switch-off function, after
2 minutes from the last use .

7 Kit contents

8 Operation

batteries.
batteries, observing the correct
.