Panasonic Toughbook CF-19KHRAG2M Reference Manual page 34

PC Card / ExpressCard
2
Insert the ExpressCard (upper slot) (D) or the PC Card (lower
slot) (E) with the label side up until it securely fits in to the slot.
For further information, refer to the instruction manual of the card.
NOTE
<Only for model with Smart Card slot>
The upper slot (D) is the PC Card slot, and the lower slot (E) is the Smart Card slot. Express Cards cannot be used.
For how to insert/remove a Smart Card:
To remove the card
1
Disable the card function.
Click on the notification area and select the card, then click [OK].
A
This step is not necessary when removing the card after turning off the computer.
2
Open the cover and remove the card.
Press the eject button (F). The eject button pops out.
A
Press the eject button (F) again so the card comes out of the slot.
B
Draw the card straight out.
C
NOTE
Check the card's specification to prevent the total operating current from exceeding the allowable limit. Otherwise mal-
function may occur.
Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA
Some types of cards cannot be used simultaneously.
After repeating insertion and removal, some types of card will not be recognized. In this case, restart the computer.
page 39
34