Dell OptiPlex Micro Plus 7010 Owner's Manual page 89

Table 39. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Warning and Errors
Fastboot
Extend BIOS POST Time
Table 40. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
VT for Direct I/O
Intel Trusted Execution Technology
(TXT)
Enable Intel Trusted Execution
Technology (TXT)
DMA Protection
Enable Pre-Boot DMA support.
Enable OS Kernel DMA support
Table 41. System setup options—Performance menu
Performance
Multi Core Support
Active Cores
Multiple Atom Cores
Intel SpeedStep
Enable or disable adapter warnings to display a warning message if a power
adapter with too little power capacity is detected.
By default, the Adapter Warnings option is enabled.
Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Enable to set the speed of the boot process.
By default, the Thorough option is enabled.
Set the BIOS POST time.
By default, the 0 seconds option is enabled.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities that are provided by Intel Virtualization Technology.
By default, the option is enabled.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities that are provided by Intel Virtualization Technology for
Direct I/O.
By default, the option is enabled.
Specifies whether a measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities that are provided by Intel Trusted Execution
Technology.
By default, the option is disabled.
Controls Pre-Boot DMA protection for both internal and external ports.
By default, the option is enabled.
If the operating system supports DMA protection this setting will indicate to
the operating system that the BIOS supports Kernel DMA protection.
By default, the option is enabled.
Enables to change the number of CPU cores available to the operating system.
By default, the All Cores options are enabled.
Allows you to change the number of Atom cores available to the operating
system.
By default, the All Cores options are enabled.
BIOS setup 89