Table of Contents
Advertisement
Technical information
7.2 Electromagnetic compatibility
Pulse-shaped interference
High-energy single pulse
(surge) according to
IEC 61000-4-5
Sinusoidal interference
The following table shows the EMC behavior of the modules with respect to sinusoidal
interference. This requires the device to meet the specifications and directives for electrical
installation.
Sinusoidal interference
HF radiation (electromagnetic fields)
according to IEC 61000-4-3
HF current feed on cables and cable
shields according to IEC 61000-4-6
Magnetic field strength according to
IEC 61000-4-8
Emission of radio interference
The following table shows the interference emission from electromagnetic fields according to
EN 61000-6-4, measured at the following distance.
Radiated emission (emitted interference)
Frequency range
30 ... 230 MHz
230 ... 1000 MHz
1 ... 3 GHz
3 ... 6 GHz
Emission of radio interference voltages
Frequency range
0.150 ... 0.5 MHz
0.5 ... 30 MHz
See also
EMC information in section "Notes on use (Page 28)".
92
Tested with
Asymmetrical coupling:
•
1 kV supply line, DC voltage
•
1 kV signal line/data cable, > 30 m
Symmetrical coupling:
•
0.5 kV power cable, DC voltage
•
1 kV signal line, > 30 m,
Test values
80% amplitude modulation at 1 kHz
•
to 10 V/m from 80 MHz ... 1 GHz
•
to 3 V/m from 1.4 ... 6 GHz
Test voltage 10 V, with 80 % amplitude modulation of 1 kHz
in the 150 kHz ... 80 MHz range
50/60 Hz; 30 A/m rms
Measuring distance
Interference emission
10 m
< 40 dB (μV/m) quasi-peak
10 m
< 47 dB (μV/m) quasi-peak
3 m
< 76 dB peak and < 56 dB average
3 m
< 80 dB peak and < 60 dB average
Interference emission
< 79 dB quasi-peak and < 66 dB average
< 73 dB quasi-peak and < 60 dB average
IFP V2, IFP V2 PRO, IFP V2 ETH
Operating Instructions, 03/2023, A5E46641410-AE
Performance
level equiva-
lence
2
2
3
Advertisement
Table of Contents
