Summary of Contents for Bratt Decor VENETIAN THREE IN ONE CRIB
Page 1
v e n e t i a n three in one crib this crib can be set up as as a low crib as a poster crib as a canopy crib *bedding & mattress not included HELP! If you need any assistance with the assembly of this crib, please call our customer service department at 888 242 7288, and a technician will talk you through the entire process.
Page 2
All contents of these instructions are the sole property of Bratt Décor, Inc. and may not be reproduced without the specific written agreement of Bratt Decor, Inc. Any violation of this will be prosecuted under international and federal copyright laws.
Page 3
LIST OF PARTS: LARGE COMPONENTS: A. 1 LEFT SIDE PIECE (see Figure 1) B. 1 RIGH SIDE PIECE (see Figure 1) C. 1 BACK OF CRIB (see Figure 1) D. 1 STABILIZER/LATCH BAR (see Figure 2) E. 1 FRONT GATE (see Figure 4) F. 1 MATTRESS SUPPORT (see Figure 3) G. 2 CHROME SLIDE RODS (see Figure 4) H. 2 SHORT CANOPY SUPPORT RODS (see Figure 5) I. 2 LONG CANOPY SUPPORT RODS (see Figure 5) J. 4 CANOPY POSTS (see Figure 5) FASTENERS IN SMALL BOX: screws shown actual size K. 4 LONG MACHINE SCREWS L. 10 STAR WASHERS MEDIUM MACHINE SCREWS N. 2 SHORT MACHINE SCREWS O. 4 THREADED RODS...
Page 4
FIGURE 1 Using the allen wrench (S), attach back piece (C) to side pieces (A) and (B) as indicated using 4 long machine screws (K) and the star washers (L). Make sure that the brackets (X) on the bottom of the side pieces are pointing inside the crib. FIGURE 2 Using the allen wrench (S), attach the stabilizer/latch bar (D) to the front of the crib using the medium machine screws (M) and 4 star washers (L).
Page 5
All contents of these instructions are the sole property of Bratt Décor, Inc. and may not be reproduced without the specific written agreement of Bratt Decor, Inc. Any violation of this will be prosecuted under international and federal copyright laws.
Page 6
All contents of these instructions are the sole property of Bratt Décor, Inc. and may not be reproduced without the specific written agreement of Bratt Decor, Inc. Any violation of this will be prosecuted under international and federal copyright laws.
Page 7
FIGURE 5 select A, B or C A. Low crib setup: If you choose not to set up this crib as a 4 poster, or canopy, attach the threaded disc covers (Q) to the top of the corner posts. Tighten (Q) by hand. Assembly is now complete. B.
Page 8
All contents of these instructions are the sole property of Bratt Décor, Inc. and may not be reproduced without the specific written agreement of Bratt Decor, Inc. Any violation of this will be prosecuted under international and federal copyright laws.
Need help?
Do you have a question about the VENETIAN THREE IN ONE CRIB and is the answer not in the manual?
Questions and answers