Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
Item
Reduce Print Streak
*1 Displayed when the auto take-up reel unit is installed.
Maintenance Menu
Item
Print Head Nozzle Check
Head Cleaning
Auto Cleaning
Cleaning(Light)
Cleaning(Heavy)
Cleaning the Mainte-
nance Parts
Replace Waste Ink Bottle
Replace Auto cutter blade
Supply Status Menu
Displays the amount of wear and the model number for each consumable item.
"Options and Consumable Products" on page 94
U
User's Guide
Control Panel Menu
Parameter
Explanation
Off
Normally, leave this Off.
If this is set when streaks occur in the print results in the vertical or
Light
diagonal direction, the streaks may become less noticeable.
Medium
Heavy
Explanation
Print a pattern, and then check the status of the nozzles for the print
head. Inspect the pattern visually and perform Head Cleaning if you
detect any missing colors.
See the following for details.
"Print Head Nozzle Check" on page 64
U
Execute Head Cleaning. Perform Auto Cleaning first. If this does not
clear the clogs, perform in the order Cleaning (Light) and then
Cleaning (Heavy).
"Head Cleaning" on page 65
U
Print Head
Start cleaning the selected parts. See the following for more
information on cleaning.
Capping Station/
"Print Head Maintenance" on page 62
U
Wiper
"Cleaning the Capping Station and Wiper" on page 56
U
If you are replacing the waste ink bottle before the message indicating
that it is time to replace the waste ink bottle appears on the control
panel's screen, do so from this menu.
"When you want to replace it at any time" on page 61
U
Start replacing the auto cutter blade. See the following for precautions
on replacing the parts.
"Replacing the Auto Cutter Blade" on page 63
U
82
Advertisement
Table of Contents
