Page 1
SAFETY AND INSTALLATION INSTRUCTIONS Model: SDION Mains Ionisation Smoke Detector with Battery Back-Up with “Hush” Feature IMPORTANT! Please read these instructions before installing your new fitting. Please retain for future reference. Pack Contents Ionisation Smoke Detector x 1 Mounting Plate...
General Information, Safety and Installation Instructions Read this first Locating the smoke alarm Check the pack and make sure you have all of the This smoke alarm is a multi station ionisation alarm parts listed on the front of this booklet. If not, contact and can be connected to other smoke alarms of the the outlet where you bought this product.
������� Installation Instructions and Care ������� NOTE: For maximum protection, an alarm should be • In very dusty or dirty environments such as ������� fitted in every room (except kitchen, bathroom and workshops. ���� ����� ������� garage). Installation DO NOT FIT A SMOKE ALARM IN THE KITCHEN OR BATHROOM, as cooking fumes and steam may trigger ����...
Installation Instructions & Care 10. Assemble the detector onto the base plate by detrimental to its operation. aligning the two projections on the base plate Clean your smoke alarm regularly to prevent dust build with the two keyhole slots in the detector. Lock in up.
AT ETERNA LIGHTING LIMITED. OPTION. THE LIABILITY If cooking or other non-hazardous sources cause the OF ETERNA LIGHTING SHALL IN NO CASE EXCEED THE unwanted alarm, it can be temporarily silenced by PURCHASE PRICE OF THE DETECTOR UNDER ANY OTHER depressing the test button and holding for approximately REMEDY PRESCRIBED BY LAW.
If your alarm is defective or develops a fault, please return it to the place where you bought it. You can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not be able to give specific instructions regarding individual installations.
Need help?
Do you have a question about the SDION and is the answer not in the manual?
Questions and answers