OPENTEXT Tableau TX1 User Manual page 113

(up to four) and the selected filesystem tile will show in green, with a checkbox added
to its parent drive tile. Selecting a filesystem will also open a drawer under the
filesystem tile, which shows the options for logical imaging destinations, as follows:
Job type: This allows selection of the desired output files types. The main logical
•
evidence file format for TX1 is lx01, which will contain all the data and metadata
for every acquired file and folder. Additionally, TX1 offers the ability to generate a
Metadata file in the common CSV (comma separated values) format, which
contains all the available metadata for every acquired file and folder. Optionally,
the metadata output file can be configured to contain all the metadata for all the
files/folders on the source drive (whether the actual files/folders were acquired or
not). That setting is made in the Settings area of the logical image job setup
screen. The Job type setting options for the selected filesystem are: Lx01, Lx01
+ Metadata, and Metadata. See "Source file metadata" on page 129 below for
more information regarding captured metadata.
Directory: This identifies in which directory the logical image job output files will
•
be stored. The default directory will initially be shown, which can be changed by
tapping on the orange Directory label to enter a Browse modal where you can
select a different destination base directory, create and select a new directory, or
delete a directory. Tap one or more of the four buttons (Date and Time, Model,
Serial, or Case ID) under the directory path to add variables as names for a
destination sub-directory. Each variable can only be selected once. Underscores
are printed as separators between multiple variable names.
The Information Company
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
OpenText Tableau Forensic TX1 Imager
113