Table of Contents
Advertisement
Chapter 2 Preparations
(b)
Using 3.5-inch HDD cage
Connect the cables as shown in the following figure. Install the hard disk drives in order from the left side.
Connecting to the miniSAS connector on the motherboard
Power
supply
Motherboard
miniSAS cable
HDD backplane interface cable
You can use the controller on the motherboard to build a RAID system. For more information, see Chapter 2
(5. RAID System Configuration) in "Maintenance Guide".
Adding a RAID controller (N8103-205/206/207/208/210/211)
Power
supply
0-3
RAID controller
miniSAS cable
HDD backplane interface cable
FBU cable
* N8103-209 cannot be installed to N8103-205/210/211.
84
MINISAS_1
MINISAS_1
BPB_CON
MINISAS_1
BPB_CON1
BPB_CON
Express5800/T110j User's Guide
HDD cage
BPB_CON1
HDD cage
Flash Backup Unit
(N8103-209)
1. Installing Internal Optional Devices
Advertisement
Table of Contents
