Panasonic KX-TH102M Operating Instructions Manual page 109

2line home communication system monitoring package
Hide thumbs Also See for KX-TH102M:
Table of Contents

Advertisement

Problem
The interrupt tone is
heard during a video call.
Video monitor
Problem
The cordless camera
does not work.
The cordless camera's
indicator is flashing
rapidly in red.
The cordless camera's
indicator lights in orange.
The image is faint.
The image sent from the
cordless camera is poor.
The image sent from the
cordless camera is dark
and difficult to see.
I cannot connect to the
cordless camera, the
image distorts, or the
image is slow.
The camera sensor is not
responding or fails to
respond.
For assistance, please visit http://www.panasonic.com/phonehelp
Cause & solution
L A call is being received. Press {OFF} to end the 1st call,
then answer the 2nd call.
Cause & solution
L Check the connections (page 18).
L The cordless camera is not registered to the base unit.
Register the cordless camera to the base unit (page
78).
L The link between the cordless camera and your
computer could not be established. The resources
available for wireless communication are limited. Wait
for other users to finish and try again.
L If you do not intend to view the images using your
computer, set the "PC camera access" to "Off" (page
57) with the base unit.
L The camera lens is dirty. Clean it with a soft dry cloth.
L Adjust the display sharpness or brightness setting
(page 60, 61).
L The place where the cordless camera is located is dark.
Improve lighting.
L Adjust the display brightness setting (page 61).
L There is a strong sunlight or a backlight in the place
where the cordless camera is located. Try shading the
camera's location.
L The cordless camera has lost communications with the
base unit. Move the cordless camera closer to the base
unit, and try again.
L There is an obstacle such as concrete wall. Move the
cordless camera to the place without an obstacle.
L A microwave or wireless LAN appliance is in use. Move
the cordless camera closer to the base unit or use the
cordless camera away from those appliances, and try
again.
L The camera sensor is dirty. Clean it with a soft dry cloth.
L The moving object may be out of the detecting range of
the cordless camera.
Useful Information
109

Advertisement

Table of Contents
loading

This manual is also suitable for:

2line kx-th102-m2line kx-tha132line kx-tha12

Table of Contents