Sharp DX-2500N Operation Manual

Hide thumbs Also See for DX-2500N:

Table of Contents

Quick Links

Search based on

what you want to do

MAKE A COPY

PRINT A DOCUMENT

SCAN AN IMAGE /

SAVE A JOB AND

SEND AN INTERNET FAX

REUSE IT LATER

OPERATION GUIDE

SEND A FAX

MAINTAIN

THE MACHINE

Search using the

table of contents

BEFORE USING THE MACHINE

COPIER

PRINTER

FACSIMILE

SCANNER / INTERNET FAX

DOCUMENT FILING

SYSTEM SETTINGS

TROUBLESHOOTING

About Operation Guide

Table of Contents

Chapters

Table of Contents

Summary of Contents for Sharp DX-2500N

Page 1 OPERATION GUIDE Search based on Search based on Search using the Search using the what you want to do what you want to do table of contents table of contents BEFORE USING THE MACHINE COPIER PRINTER MAKE A COPY PRINT A DOCUMENT SEND A FAX FACSIMILE SCANNER / INTERNET FAX...
Page 2 MAKE A COPY Conserve Reduce copy Make a copy of this Make a copy on mistakes type of original this type of paper Add the date or Assemble output page numbers into a pamphlet Other convenient functions...
Page 3 Conserve Copy multiple pages on Copy on both sides of the one side of one sheet of paper paper Copy on the front and back of a card...
Page 4 Reduce copy mistakes Check the number of Print one set of copies for scanned pages before proofing making copies...
Page 5 Make a copy of this type of original More original pages than Mixed colour and black & white originals can be loaded at once Mixed-size originals Bulky original (shadows appear at edges) Bound original such as a Book or pamphlet (make book (one page at a time) facing page copies)
Page 6 Make a copy on this type of paper Envelopes and other A3 wide paper special media Tab Paper Transparency film...
Page 7 Add the date or page numbers Add the date Add a stamp Add the page number Add text...
Page 8 Assemble output into a pamphlet Create a stapled pamphlet Staple output Create a blank margin for Punch holes in output punching...
Page 9 Other convenient functions Functions used for specific purposes  Make a copy of arranged photos  Create a large poster  Make a mirror-image copy  Copy onto the centre of the paper  Make a negative copy Convenient functions ...
Page 10 PRINT A DOCUMENT Conserve Print without a Print attractive Assemble output computer output into a pamphlet Print on this type Add text or an of paper image Other convenient functions...
Page 11 Conserve Print on both sides of the Print multiple pages on one paper side of the paper...
Page 12 Print without a computer F T P Print a file on an FTP Print a file in a USB memory device Print a file in a network Print a file stored in the folder machine...
Page 13 Print attractive output Print matching the size of Adjust the brightness and the paper contrast Print using colour settings Bring out faint text and suitable for the data lines Select the print mode...
Page 14 Assemble output into a pamphlet Create a stapled pamphlet Staple output Create a blank margin for Punch holes in output punching Print specific pages on the front side of the paper...
Page 15 Print on this type of paper Envelopes Tab Paper Transparency film Print specific pages on different paper Rotate the image 180 degrees...
Page 16 Add text or an image Add a watermark to print Overlay an image on the data print data Overlay a fixed form on the print data...
Page 17 Other convenient functions Correct the size or orientation of the print data  Enlarge or reduce the print image  Print a mirror-image Security is important  Print confidentially  Print an encrypted PDF file Functions used for specific purposes ...
Page 18 SEND A FAX Conserve Send this type of Prevent transmission to Send a clear document the wrong destination document Save trouble Security is important Other convenient functions...
Page 19 Conserve Send when the rate is Check received data before lowest printing Send two original pages as Relay a transmission a single page through a branch office...
Page 20 Send this type of document Bulky original (shadows Bound original such as a appear at edges) book (one page at a time) Original printed on both More original pages than sides can be loaded at once ID card or other card...
Page 21 Prevent transmission to the wrong destination Check the destination once Check the result of more before sending transmission Check the log of previous transmissions...
Page 22 Send a clear document Adjust the exposure Adjust the image quality Specify the size before Send without shadows at sending the edges...
Page 23 Save trouble Store frequently used Send to multiple settings destinations X X X X - 6 7 8 9 X X X X - 6 7 8 9 X X X X - 9 8 7 4 X X X X - 9 8 7 4 View the transmission log Easily specify an address X X X X - 4 5 6 7...
Page 24 Security is important Check the destination once Send confidentially more before sending Initiate reception of a Print protected reception document from a sending data machine Send a document at the other machine's request...
Page 25 Other convenient functions Convenient management functions  Forward a received fax to a network address  Print a list of addresses Convenient functions  Send a thin original  Select a transmission destination from a global address book  Give priority to a transmission ...
Page 26 SCAN AN IMAGE / SEND AN INTERNET FAX Send a clear Send this type of Prevent transmission to Send a smaller image document the wrong destination file Save trouble Scan from my computer Other convenient functions...
Page 27 Send a clear image Adjust the contrast or Adjust the resolution image quality before sending Send without shadows at Suppress the background of the edges a transmitted document...
Page 28 Send this type of document Bulky original (shadows Bound original such as a appear at edges) book (one page at a time) More original pages than Original printed on both can be loaded at once sides Original with background...
Page 29 Prevent transmission to the wrong destination Check the result of Check the log of previous transmission transmissions...
Page 30 Send a smaller file Send at low resolution Compress a file before sending Reduce an image before Send an image in black & sending white Send two original pages as ID or other card a single page...
Page 31 Save trouble Store frequently used Send to multiple settings destinations a a a @ a a . a a . c a a a @ a a . a a . c o b b b @ b b . b b . b b b @ b b .
Page 32 Other convenient functions Convenient management functions  Forward a received fax to a network address  Print a list of transmission destinations Convenient functions  Scan a thin original  Select a transmission destination from a global address book  Send at a specified time ...
Page 33 SAVE A JOB AND REUSE IT LATER Search for a file Organize my files Save an important Print a batch of document files...
Page 34 Search for a file Search for a file using a Search by checking the keyword contents of files...
Page 35 Organize my files Delete a file Delete all files Periodically delete files Change the folder...
Page 36 MAINTAIN THE MACHINE Clean the Replace a toner Replace the Replace the toner collection container machine cartridge staple cartridge Dispose of punch waste...
Page 37 Clean the machine Clean the document glass and Clean the main charger of automatic document feeder the photoconductive drum Clean the original feed Clean the bypass feed roller roller Clean the laser unit...
Page 38 ABOUT OPERATION GUIDE There are two ways to search for a topic in this guide: you can use an "I want to..." menu, or you can use a regular table of contents. The following explanation assumes that Adobe Reader 8.0 is being used (Some buttons do not appear in the default state.).
Page 39 Front cover This holds down the original. Open this cover to switch the main power switch to "On" Finisher* (DX-2500N only) or "Off" or to replace a toner cartridge. This can be used to staple output. A punch module can...
Page 40 MANUALS PROVIDED WITH THE MACHINE Operation manuals in PDF format (this manual) The manuals in PDF format provide detailed explanations of the procedures for using the machine in each mode. To view the PDF manuals, download them from the hard drive in the machine. The procedure for downloading the manuals is explained in "How to read the Operation Guide"...
Page 41 • Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due to use of the product.
Page 42: Table Of Contents
• UNIVERSAL DESIGN RELATED TO SHARP OSA ......1-51 HEARING ......1-28 •...
Page 43 BEFORE USING THE MACHINE MAINTENANCE REGULAR MAINTENANCE ....1-54 • CLEANING THE DOCUMENT GLASS AND AUTOMATIC DOCUMENT FEEDER . . . 1-54 • CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM .
Page 44: Part Names And Functions
This holds down the original. Open this cover to switch the main power switch to "On" Finisher (DX-2500N only) or "Off" or to replace a toner cartridge. This can be used to staple output. A punch module can TURNING THE POWER ON AND OFF (page 1-15) also be installed to punch holes in output.
Page 45 (12) (14) (10) (11) (13) USB connector (A type) (DX-2500N Only) (12) Tray 2 (when a stand/500&2000 sheet paper drawer is installed)* Supports USB 2.0 (Hi-Speed). This is used to connect a USB device such as USB This holds paper.
Page 46: Interior
BEFORE USING THE MACHINE INTERIOR (15) (16) (17) (18) (19) (20) (21) (22) (23) (24) (25) (26) (27) (15) Toner cartridges (21) Main power switch These contain toner for printing. When the toner runs out This is used to power on the machine. in a cartridge, the cartridge of the colour that ran out must When using the fax or Internet fax functions, keep this be replaced.
Page 47: Automatic Document Feeder And Document Glass
BEFORE USING THE MACHINE AUTOMATIC DOCUMENT FEEDER AND DOCUMENT GLASS Automatic document feeder Paper feed roller Scanning area This roller rotates to automatically feed the original. Originals placed in the document feeder tray are scanned here. Document feeding area cover REGULAR MAINTENANCE (page 1-54) Open this cover to remove an original misfeed or clean...
Page 48: Side And Back
BEFORE USING THE MACHINE SIDE AND BACK USB connector (A type) When the fax expansion kit is installed Supports USB 2.0 (Hi-Speed). This is used to connect a USB device such as USB memory to the machine. USB connector (B type ) Supports USB 2.0 (Hi-Speed).
Page 49: Operation Panel
BEFORE USING THE MACHINE OPERATION PANEL Touch panel Numeric keys Messages and keys appear in the touch panel display. These are used to enter the number of copies, fax Touch the displayed keys to perform a variety of numbers, and other numerical values. These keys are operations.
Page 50 BEFORE USING THE MACHINE (10) (11)(12) (13) (14) (15) (16) (17) (18) (10) [COLOUR START] key (15) [#/P] key ( Press this key to copy or scan an original in colour. When using the copy function, press this key to use a job This key cannot be used for fax or Internet fax.
Page 51: Touch Panel
BEFORE USING THE MACHINE TOUCH PANEL This section explains how to use the touch panel. Messages and keys are displayed in the touch panel display to enable various operations to be performed. [JOB STATUS] key ( [HOME] key ( [SYSTEM SETTINGS] key ( Display •...
Page 52 BEFORE USING THE MACHINE Example 2 Example 3 Special Modes Special Modes Cancel Margin Shift Dual Page Margin Shift Erase Copy Tandem Pamphlet Copy Build Copy Right Left Down Side 1 Side 2 Transparency (0~20) (0~20) Covers/Inserts Multi Shot Inserts Book Copy Tab Copy Card Shot...
Page 53: Status Display
BEFORE USING THE MACHINE STATUS DISPLAY When the base screen of a mode appears, the right side of the touch panel shows the machine's status. The information shown is explained below. Example: Basic screen of copy mode Copies in progress from tray 1. Job Status Job Status Interrupt...
Page 54: System Bar
BEFORE USING THE MACHINE SYSTEM BAR The system bar appears at the bottom of the touch panel. The items that appear in the system bar are explained below. MFP Status Colour Mode Special Modes 020/015 Full Colour 2-Sided Copy Plain Copying Output 020/015...
Page 55 BEFORE USING THE MACHINE This appears when the data security kit is being used. The icon appears when the machine is communicating with an external application. This appears when the IC card reader is connected. This appears when the IC card reader is communicating with the machine.
Page 56: Turning The Power On And Off
BEFORE USING THE MACHINE TURNING THE POWER ON AND OFF The machine has two power switches. The main power switch is at the lower left after the front cover is opened. The other power switch is the [POWER] key ( ) on the operation panel at the top right.
Page 57: Energy Save Functions
BEFORE USING THE MACHINE ENERGY SAVE FUNCTIONS This product has the following energy save functions that help conserve natural resources and reduce environmental pollution. Eco Scan Setting Non-print functions such as image sending and document filing function can be executed while the fusing unit is kept Off. Power Management Setting The power management setting includes preheat mode, auto power shut-off mode, and other functions that reduce power consumption while in a waiting state.
Page 58: User Authentication
BEFORE USING THE MACHINE USER AUTHENTICATION User authentication restricts the use of the machine to users that have been registered. The functions that each user is allowed to use can be specified, allowing the machine to be customized to meet the needs of your workplace. When the administrator of the machine has enabled user authentication, each user must log in to use the machine.
Page 59 BEFORE USING THE MACHINE Touch the [OK] key. User Authentication After the entered user number is authenticated, the user count screen will appear briefly. Usage status: used/remaining pages Black-white : 87,654,321/12,345,678 Full colour : 87,654,321/12,345,678 2-colour : 87,654,321/12,345,678 Single colour: 87,654,321/12,345,678 Admin Login When page limits have been set in "Pages Limit Group List"...
Page 60: Authentication By Login Name / Password
BEFORE USING THE MACHINE AUTHENTICATION BY LOGIN NAME / PASSWORD The following procedure is used to log in using a login name and password received from the administrator of the machine or the administrator of the LDAP server. User Authentication Login Name User Name Password...
Page 61 BEFORE USING THE MACHINE Touch the [Password] key. User Authentication A text entry screen for entering the password will appear. Enter your password that is stored in "User List" in the system Login Name settings (administrator). User Name User 0001 Password If you are logging in to an LDAP server, enter the password that Auth to:...
Page 62 BEFORE USING THE MACHINE Touch the [OK] key. User Authentication After the entered login name and password are authenticated, the user count screen will appear briefly. Login Name User Name User 0001 Usage status: used/remaining pages Password Black-white : 87,654,321/12,345,678 Full colour : 87,654,321/12,345,678 Auth to: Login Locally...
Page 63: Home Screen
Application Keys* It is possible to display a combined total of eight Sharp OSA application shortcuts and my menu shortcuts. * The productivity kit is required. Shortcuts to functions can be registered as keys in the my menu screen. When a shortcut key is touched, the screen for that function appears.
Page 64: Remote Operation Of The Machine
BEFORE USING THE MACHINE REMOTE OPERATION OF THE MACHINE The remote operation function allows you to operate the machine from your computer. When this function is added, the same screen as the operation panel screen appears on your computer. This allows you to operate the machine from your computer in the same way as if you were standing in front of the machine.
Page 65: Items Recorded In The Job Log
BEFORE USING THE MACHINE ITEMS RECORDED IN THE JOB LOG (The productivity kit is required.) The machine records the jobs that are performed in the job log. The main information that is recorded in the job log is described below. •...
Page 66 BEFORE USING THE MACHINE Item name Description Main items Number of Reserved Number of specified sets or reserved destinations. Sets Number of Completed Number of completed sets or number of destinations to which Sets transmission was successfully completed. Number of Reserved Number of reserved original pages of a copy, print, scan job, or other Pages job.
Page 67 BEFORE USING THE MACHINE Item name Description Detailed Items Original Size Size of scanned original. For a document filing print job, the paper size of the file. Original Type Original type (text, printed photo, etc.) set in the exposure settings screen.
Page 68: Universal Design In The Machine
BEFORE USING THE MACHINE UNIVERSAL DESIGN IN THE MACHINE Universal design refers to how easy it is for a disabled or elderly person to use a product. A variety of measures have been implemented in the structure and software of this machine to facilitate easy use by disabled and elderly people.
Page 69: Universal Design Related To Hearing
BEFORE USING THE MACHINE UNIVERSAL DESIGN RELATED TO HEARING Audible alert sounds when changing settings When moving through copy ratio or contrast settings, the user is alerted by an audible sound at the default setting (copy ratio 100%, contrast 3). Select [System Settings] (Administrator) →...
Page 70: Loading Paper
BEFORE USING THE MACHINE LOADING PAPER IMPORTANT POINTS ABOUT PAPER This section provides information that you should know before loading paper in the paper trays. Be sure to read this section before loading paper. NAMES AND LOCATIONS OF TRAYS The names of the trays are as follows. Bypass tray Tray 1 Tray 2*...
Page 71: Useable Paper
Plain paper that can be used • SHARP standard plain paper (80 g/m (21 lbs.)). For paper specifications, see the specifications in the Start Guide. • Pain paper other than SHARP standard paper (60 g/m to 105 g/m (16 lbs. to 28 lbs.)) Recycled paper, coloured paper and pre-punched paper must meet the same specifications as plain paper.
Page 72 • The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or nearest authorised service representative for advice on using these types of paper.
Page 73: Tray Settings For Tray 1 To 4
BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAY 1 TO 4 LOADING PAPER AND CHANGING THE PAPER SIZE A maximum of 500 sheets of paper from size A5R to A3 (5-1/2" x 8-1/2"R to 11" x 17") can be loaded in trays 1 to 4. Pull out the paper tray.
Page 74 BEFORE USING THE MACHINE Gently push the paper tray into the machine. Push the tray firmly all the way into the machine. If you loaded a different type or size of paper than was loaded previously, be sure to change the "Paper Tray Settings" in the system settings.
Page 75: Tray Settings For Tray 3 To 4
A4 or 8-1/2" x 11" size paper can be loaded in tray 3 and tray 4. These are parallel large-capacity trays that allow a total of approximately 2000 sheets of SHARP standard paper (80 g/m (20lbs.)) to be loaded. If you wish to change the paper size of tray 3 or tray 4, see "CHANGING THE PAPER SIZE IN PAPER TRAY 3 - TRAY...
Page 76: Loading Paper In Paper Tray 3 - Tray 4
BEFORE USING THE MACHINE Gently push tray 3-tray 4 into the machine. Push the tray firmly all the way into the machine. Set the paper type. If the paper size was changed from an AB size to an inch size, or from an inch size to an AB size, or if the paper type was changed, be sure to change the appropriate settings as explained in "Paper Tray Settings"...
Page 77 BEFORE USING THE MACHINE Push in the paper guide so that it locks into place. Push the paper size guide in until the hook at the bottom locks into place. (You will hear a "click" when the hook locks.) Move the paper size guide slightly to verify that it has locked into place.
Page 78: Loading Paper In The Bypass Tray
BEFORE USING THE MACHINE LOADING PAPER IN THE BYPASS TRAY The bypass tray can be used to print on plain paper, envelopes, label sheets, tab paper, and other special media. Up to 100 sheets of paper can be loaded (up to 40 sheets of heavy paper) for continuous printing similar to the other trays. Open the bypass tray.
Page 79: Important Points When Using The Bypass Tray
IMPORTANT POINTS WHEN USING THE BYPASS TRAY • When using plain paper other than SHARP standard paper or special media other than SHARP-recommended transparency film, or when printing on the reverse side of previously used paper, the paper must be loaded one sheet at a time.
Page 80 BEFORE USING THE MACHINE Loading envelopes When inserting envelopes in the bypass tray, place them aligned to the left side in the orientation shown below. Only the front side of envelopes can be printed on. Be sure to place the front side face down. Important points when using envelopes •...
Page 81: Originals
BEFORE USING THE MACHINE ORIGINALS This section explains how to place originals in the automatic document feeder and on the document glass. PLACING THE ORIGINAL PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER This section explains how to place originals in the automatic document feeder. Allowed original sizes Minimum original size Maximum original size...
Page 82 BEFORE USING THE MACHINE Make sure an original does not remain on the document glass. Open the automatic document feeder, make sure that an original is not on the document glass, and then gently close the automatic document feeder. Adjust the original guides to the size of the originals.
Page 83: Placing The Original On The Document Glass
BEFORE USING THE MACHINE PLACING THE ORIGINAL ON THE DOCUMENT GLASS This section explains how to place the original on the document glass. Allowed original sizes When the original is a non-standard size, see the Maximum original size appropriate explanation below for the mode you are using.
Page 84 BEFORE USING THE MACHINE Close the automatic document feeder. After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner. Placing a thick book When scanning a thick book or other thick original, follow the steps below to press the book down.
Page 85: Peripheral Devices
PERIPHERAL DEVICES This section describes the peripheral devices that can be used with the machine and explains how to use the finisher, as well as Sharp OSA (application communication module and external account module). PERIPHERAL DEVICES Peripheral devices can be installed on the machine to increase its range of functionality.
Page 86 Sharpdesk 10 licence kit MX-US10 and computer files. Sharpdesk 50 licence kit MX-US50 Sharpdesk 100 licence kit MX-USA0 Sharp OSA Network Scanner Tool MX-UN01A 1 Licence Kit Sharp OSA Network Scanner Tool MX-UN05A 5 Licence Kit Sharp OSA Network Scanner Tool...
Page 87: Finisher
BEFORE USING THE MACHINE FINISHER (DX-2500N only) The finisher is equipped with the offset function, which offsets each set of output from the previous set. In addition, each set of sorted output can be stapled. An optional hole punching unit can also be installed to punch holes in output.
Page 88: Finisher Maintenance
BEFORE USING THE MACHINE FINISHER MAINTENANCE When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below to replace the staple cartridge. Replacing the staple cartridge Open the cover. While pressing the lever over to the left, slide the finisher to the left until it stops.
Page 89 BEFORE USING THE MACHINE Replace the staple case. Push the staple case in until it clicks into place. Slide the finisher back to the right. Gently slide the finisher back to the right until it locks into its original position. Close the cover.
Page 90: Punch Module
BEFORE USING THE MACHINE PUNCH MODULE A punch module can be installed to punch holes in output. To install a punch module, a finisher is required. DISCARDING PUNCH WASTE Punch waste from punched holes is collected in the punch waste box. Follow the steps below to discard the punch waste.
Page 91 BEFORE USING THE MACHINE Slide the finisher back to the right. Gently slide the finisher back to the right until it locks into its original position. Close the cover. 1-50 Contents...
Page 92: Sharp Osa
Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to a digital multifunction machine over a network. When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the machine such as scan send can be linked to an external application.
Page 93: External Account Module (Mx-Amx3)
The two modes for using an external account application operate as explained below. External authentication mode When the [Enable Authentication by External Server] checkbox is selected in "External Account Setting" of "Sharp OSA Settings" in the system settings (administrator), the machine enters external authentication mode. When the machine is powered on in external authentication mode, the machine accesses the external account application and displays the login screen.
Page 94 OFF" (page 1-15). External count mode When only the [External Account Control] setting is enabled in "External Account Setting" of "Sharp OSA Settings" in the system settings (administrator), the machine enters external count mode. Unlike external authentication mode, when the machine is started in "external count mode", the login screen of the external account application is not displayed.
Page 95: Regular Maintenance
BEFORE USING THE MACHINE MAINTENANCE This section explains how to clean the machine and replace the toner cartridges and the toner collection container. REGULAR MAINTENANCE To ensure that the machine continues to provide top quality performance, periodically clean the machine. Warning Do not use a flammable spray to clean the machine.
Page 96 BEFORE USING THE MACHINE Open the automatic document feeder and remove the glass cleaner. Clean the document scanning area on the document glass with the glass cleaner. Replace the glass cleaner. 1-55 Contents...
Page 97: Cleaning The Main Charger Of The Photoconductive Drum
BEFORE USING THE MACHINE CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM If black lines or coloured lines appear even after you have cleaned the document glass and automatic document feeder, use the charger cleaner to clean the main charger that charges the drum. Open the front cover.
Page 98 BEFORE USING THE MACHINE Remove the charger cleaner The charger cleaner is attached to the front cover of the machine. (1) Unfasten it from the claw by pressing the right side of the charger cleaner. (2) Place it in the front spread across the top of the claw.
Page 99 BEFORE USING THE MACHINE Replace the charger cleaner in its Boss original position. (1) Rotate the charger cleaner after putting it on the boss and hook its edge (the side that does not have a handle) to the claw on the left side.
Page 100: Cleaning The Pt Charger Of The Primary Transfer Belt
BEFORE USING THE MACHINE CLEANING THE PT CHARGER OF THE PRIMARY TRANSFER BELT If black lines or coloured lines appear even after you have cleaned the document glass, automatic document feeder and the main charger, use the PT charger cleaner to clean the PT charger. Open the front cover.
Page 101 BEFORE USING THE MACHINE Mount the toner collection container. Insert it in a direction slanting from the top towards the bottom. (A direction opposite to that at the time of mounting it.) Push the toner collection container in till the innermost point. Push it in until it clicks into place.
Page 102: Cleaning The Bypass Feed Roller
BEFORE USING THE MACHINE CLEANING THE BYPASS FEED ROLLER If paper misfeeds frequently occur when feeding envelopes or heavy paper through the bypass tray, wipe the surface of the feed roller with a clean soft cloth moistened with water or a neutral detergent. CLEANING THE ORIGINAL FEED ROLLER If lines or other dirt appear on the scanned original when the automatic document feeder is used, wipe the surface of the roller with a clean soft cloth moistened with water or a neutral detergent.
Page 103: Cleaning The Laser Unit
BEFORE USING THE MACHINE CLEANING THE LASER UNIT When the laser unit inside the machine becomes dirty, line patterns (coloured lines) may form in the printed image. Identifying lines (coloured lines) caused by a dirty laser unit • Coloured lines always appear in the same place. (The lines are never black.) •...
Page 104 BEFORE USING THE MACHINE Open the inner cover and take out a replacement cleaner. Replacement cleaners are stored on the inner cover. Grasp the end of the cleaner and pull it out of the cover. Remove the dirty cleaner from the tip of the cleaning tool.
Page 105 BEFORE USING THE MACHINE Open the inner cover and clean the laser unit. (1) Point the cleaner down and slowly insert the tool into the hole that you wish to clean. Be sure to point the cleaner down. Labels similar to (A) are attached to areas that require cleaning.
Page 106 BEFORE USING THE MACHINE Replace the cleaning tool. (1) Rotate the cleaning instrument after putting it on the boss and hook its edge (the side Boss where the cleaner is fixed) to the claw on the left side. (2) Place the right-hand side of the cleaning instrument on the front side, spread across the top of the claw.
Page 107: Replacing The Toner Cartridges
BEFORE USING THE MACHINE REPLACING THE TONER CARTRIDGES Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears. In copy mode Toner Low. (□□□□)(Do not replace cartridge until requested.) If you continue to use the machine without replacing the cartridge, the following message will appear when the toner runs out.
Page 108 BEFORE USING THE MACHINE Open the front cover. Locations of colour toner cartridges (A): Yellow (B): Magenta (C): Cyan (D): Black Pull the toner cartridge toward you. Gently pull the toner cartridge horizontally toward you. If the cartridge is pulled out abruptly, toner may spill out. Example: Replacing the yellow toner cartridge Hold the toner cartridge with both hands as shown and pull it out of the machine.
Page 109 • If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.
Page 110: Replacing The Toner Collection Container
BEFORE USING THE MACHINE REPLACING THE TONER COLLECTION CONTAINER The toner collection container collects excess toner that is produced during printing. When the toner collection container becomes full, "Replace used toner container." will appear. Follow the procedure below to replace the toner collection container.
Page 111 BEFORE USING THE MACHINE Place the box on a flat surface. Place a sheet of newspaper on the surface before placing the box. • Do not point the holes down as used toner will spill out. • Do not discard the removed toner collection container. Store it in a plastic bag. The person in charge shall collect it for maintenance.
Page 112: Entering Text
BEFORE USING THE MACHINE ENTERING TEXT This section explains the text entry screen. FUNCTIONS OF THE MAIN KEYS Description This changes the text entry screen from the lower case screen to the upper case screen. The upper case Caps screen will continue to appear until the [Caps] key is touched again so that it is no longer highlighted. The [Caps] key is convenient when you wish to enter all capital letters.
Page 113: Keyboard
The layout of the keys in the text entry screen in the touch panel differs slightly from the layout of the keys on the external keyboard. Use a SHARP-recommended external keyboard. For the recommended keyboards, please contact your dealer or nearest authorised service representative.
Page 114 CHAPTER 2 COPIER This chapter provides detailed explanations of the procedures for using the copy function. OUTPUT ....... . . 2-33 BEFORE USING THE MACHINE AS A •...
Page 115 COPIER COPYING BOTH SIDES OF A CARD ON ONE CONVENIENT COPY FUNCTIONS SHEET OF PAPER (Card Shot) ....2-81 INTERRUPTING A COPY RUN (Interrupt PRINTING THE DATE AND A STAMP ON copy).
Page 116: Before Using The Machine As Acopier
COPIER BEFORE USING THE MACHINE AS A COPIER This section provides information that you should know before using the machine as a copier. BASE SCREEN OF COPY MODE Touch the [COPY] key in the touch panel to open the base screen of copy mode. The base screen shows messages and keys necessary for copying, and settings that have been selected.
Page 117 COPIER Paper select display (14) Customized keys This shows the size of paper loaded in each tray. The keys that appear here can be changed to show For the bypass tray, the paper type appears above the settings or functions that you prefer. The following keys paper size.
Page 118 COPIER Customizing displayed keys Special mode keys and other keys can be displayed in the base screen. By assigning frequently used functions to these keys, you can access the functions with a single touch. To change the function that is assigned to a key, use "Customize Key Setting"...
Page 119: Copying Sequence
COPIER COPYING SEQUENCE This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy operation takes place smoothly. For detailed procedures for selecting the settings, see the explanation of each setting in this chapter. Place the original.
Page 120 COPIER Output settings Select copy output settings. Output The main settings are as follows: Right Tray • Sort mode Sort mode (page 2-35) • Group mode Group mode (page 2-35) Offset • Offset mode Offset function (page 2-35) • Staple sort mode Sort Staple sort function (page 2-36)
Page 121 COPIER • When one or more special modes are selected, the key appears in the base screen. Touch the key to display a list of the selected special modes. This lets you check what special modes are selected and the settings of each mode. Checking what special modes are selected (page 2-5) •...
Page 122: Originals
COPIER ORIGINALS CHECKING THE ORIGINAL SIZE When [Auto] appears in the [Original] key, the size of the placed original is automatically detected. The machine automatically detects the original size when an original is placed and displays the size in the [Original] key in the base screen. Example of base screen The original size is displayed.
Page 123 COPIER Standard original placement orientations Place originals in the document feeder tray or on the document glass so that the top and bottom of the original are oriented as shown in the illustration. If the original is not oriented correctly and a function such as stapling is selected, the staple positions may not be correct.
Page 124: Paper Trays
COPIER PAPER TRAYS The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (automatic paper tray selection). If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually. Touch the [Paper Select] key.
Page 125: Basic Procedure For Making Copies
COPIER BASIC PROCEDURE FOR MAKING COPIES This section explains the basic procedures for making copies, including selection of the copy ratio and other copy settings. MAKING COPIES USING THE AUTOMATIC DOCUMENT FEEDER TO MAKE COPIES This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder. Place the originals face up in the document feeder tray with the edges Indicator line...
Page 126 COPIER Set the number of copies (number of sets) with the numeric keys. Special Modes 2-Sided Copy Plain • Up to 999 copies (sets) can be set. • A single copy can be made even if "0" appears for the number of copies. If an incorrect number of copies is set...
Page 127: Making A Copy Using The Document Glass
COPIER MAKING A COPY USING THE DOCUMENT GLASS To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass.
Page 128 COPIER Set the number of copies (number of sets) with the numeric keys. Special Modes 2-Sided Copy Plain • Up to 999 copies (sets) can be set. • A single copy can be made even if "0" appears for the number of copies. If an incorrect number of copies is set...
Page 129: Automatic 2-Sided Copying
COPIER AUTOMATIC 2-SIDED COPYING USING THE AUTOMATIC DOCUMENT FEEDER TO MAKE 2-SIDED COPIES Originals Copies Originals Originals Copies Copies Automatic 2-sided copying of 1-sided Automatic 2-sided copying of 2-sided 1-sided copying of 2-sided originals originals originals Copying onto both sides of a sheet saves paper. Place the originals face up in the document feeder tray with the edges Indicator line...
Page 130 COPIER Check the paper to be used and the Colour Mode Special Modes colour mode. Full Colour 2-Sided Copy Plain Make sure that the desired paper (tray) and colour mode are Output Exposure selected. Auto File • To change the paper (tray), touch the [Paper Select] key. Quick File PAPER TRAYS (page 2-11)
Page 131: Automatic 2-Sided Copying Using The Document Glass
COPIER AUTOMATIC 2-SIDED COPYING USING THE DOCUMENT GLASS Originals Copies Automatic 2-sided copying of 1-sided originals Open the automatic document feeder, place the original face down on the Original size detector document glass, and then gently close the automatic document feeder. Document glass scale Document glass scale mark...
Page 132 COPIER Select the 2-sided copy mode. 2-Sided Copy (1) Touch the [1-Sided to 2-Sided] key. (2) Touch the [OK] key. Binding Change The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass. Check the paper to be used and the Colour Mode Special Modes...
Page 133 COPIER Touch the [Read-End] key. Place next original. Press [Start]. When finished, press [Read-End]. Read-End To cancel scanning of the original and copying... Press the [STOP] key ( System Settings (Administrator): Initial Status Settings (2-Sided Copy) The default 2-sided copy mode can be changed. 2-20 Contents...
Page 134: Copy Colour Modes
COPIER COPY COLOUR MODES The colour mode of the [COLOUR START] key is normally set to [Full Colour] so that copying takes place in full colour mode when the [COLOUR START] key is pressed. If colour originals are mixed together with black & white originals, set the colour mode to [Auto] to have the colour mode change appropriately for each original.
Page 135 COPIER Selecting single colour copying When [Single Colour] is selected for the colour mode, the following screen appears. Touch the desired colour and touch the [OK] key. Colour Mode Single Colour R(Red) G(Green) B(Blue) C(Cyan) M(Magenta) Y(Yellow) Selecting 2 colour copying When [2 Colour] is selected for the colour mode, the following screen appears.
Page 136: Changing The Exposure And Original Image Type
COPIER CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE The exposure and original image type can be selected to obtain a clear copy. AUTOMATIC ADJUSTMENT OF THE EXPOSURE AND ORIGINAL TYPE Automatic exposure adjustment operates by default to automatically adjust the exposure level and original type as appropriate for the original being copied.
Page 137 COPIER Adjust the exposure level. Exposure Touch the key to make the copy darker. Auto Touch the key to make the copy lighter. Manual Original Image Type • Using a copy or printed page as an original Text/ Text/Photo Text When using a copy or printed page from the machine as an Prtd.Photo Printed...
Page 138: Reduction/Enlargement/Zoom
COPIER REDUCTION/ENLARGEMENT/ZOOM AUTOMATIC RATIO SELECTION (Auto Image) This section explains the automatic ratio selection function (Auto Image), which automatically selects the ratio to match the paper size. When the paper tray is manually changed, the [Auto Image] key appears in the base screen of copy mode. Touch the [Auto Image] key to have the reduction or enlargement ratio automatically selected based on the original size and the selected paper size.
Page 139: Manually Selecting The Ratio (Preset Ratios/Zoom)
COPIER MANUALLY SELECTING THE RATIO (Preset ratios/Zoom) Touch the [Copy Ratio] key in the base screen of copy mode to select one of five preset enlargement ratios or five (four) preset reduction ratios (maximum 400%, minimum 25%). In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%. Set the ratio.
Page 140 COPIER Touch the [OK] key. Copy Ratio After touching the [OK] key, make sure that a paper size suitable for the ratio is selected. 115% Zoom 122% 141% 100% Auto Image XY Zoom When the automatic document feeder is used, the selectable ratio ranges from 25% to 200%. To return the ratio to 100%...
Page 141: Enlarging/Reducing The Length And Width Separately (Xy Zoom)
COPIER ENLARGING/REDUCING THE LENGTH AND WIDTH SEPARATELY (XY Zoom) The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately. Both the horizontal and vertical ratios can be set from 25% to 400% in increments of 1%. Touch the [Copy Ratio] key in the base screen of copy mode and then follow the steps below.
Page 142: Original Sizes
COPIER ORIGINAL SIZES SPECIFYING THE ORIGINAL SIZE When the original size is a non-standard size or is not detected correctly, manually specify the original size. Touch the [Original] key in the base screen of copy mode and then follow the steps below. Specifying an AB original size (1) Touch the appropriate original size key.
Page 143: Storing Frequently Used Original Sizes
COPIER Enter the original size. (1) Enter the X (horizontal) dimension of the Original original. Cancel Size Input Touch the X (width) numeric value display key to open a number entry screen. Enter the width of the original with (25~432) the numeric keys, and touch the [OK] key in the number (25~297) entry screen.
Page 144 COPIER Store the original size. Original (1) Touch the [Store/Delete] tab. Custom Size (2) Touch a key for storing a custom original X254 Y210 size. Touch a key that does not show a size ( Recall Store/Delete If you wish to edit or clear a previously stored key... Touch the key that you want to edit or clear.
Page 145 COPIER Retrieving a stored original size To retrieve a stored original size, touch the [Original] key in the base screen of copy mode and perform the steps below. Touch the [Custom Size] key. Original Auto Manual Inch 216x343 216x340 Size Input Custom Size Retrieve the desired stored original size.
Page 146: Output
COPIER OUTPUT To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions that can be selected are sort, group, offset, staple sort, and punch. All explanations of the settings below assume that a finisher and punch module are installed.
Page 147 COPIER The above screen shows the keys that appear when a finisher and punch module are installed. The keys that appear will vary depending on what peripheral devices are installed. In addition, it may not be possible to select some keys depending what peripheral devices are installed. If your screen is different from the screen of previous page, see the screens that follow.
Page 148: Output Modes
COPIER OUTPUT MODES This section explains the output modes. Sort mode Group mode This is used to sort (collate) output into sets. This function groups copies by page. Example: Sorting the output into 5 sets Example: Groups of 5 copies of each page Originals Output Originals...
Page 149 COPIER Staple sort function The staple sort function sorts output into sets, staples each set, and delivers the sets to the tray. The relations between the stapling positions, paper orientation, permitted paper sizes for stapling, and number of sheets that can be stapled are shown below. For original placement orientations, see "Original placement orientation (for the staple sort and punch functions)"...
Page 150 COPIER Punch function If an optional punch module is installed, holes can be punched in output. Paper size that can be punched is B5R to A3 (7-1/4" x 10-1/2"R to 11" x 17"). However, A3W (12" x 18") sized paper and special media such as transparency film and tab paper cannot be used.
Page 151: Making Copies Using The Bypass
COPIER MAKING COPIES USING THE BYPASS TRAY In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and other special media. For detailed information on paper that can be loaded in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
Page 152 COPIER Check the paper type setting for the Paper Select bypass tray. If you need to change the Paper Tray Bypass Tray setting, touch the paper type key. Plain If you do not need to change the paper size and type that Plain 2.
Page 153 COPIER Select the bypass tray. (1) Touch the paper size key of the bypass tray. Paper Select (2) Touch the [OK] key. Paper Tray Bypass Tray Plain Plain 2. A4R Plain 3. B4 Plain 4. A3 Plain Press the [COLOUR START] key or the [BLACK & WHITE START] key. Scanning begins.
Page 154: Special Modes
COPIER SPECIAL MODES This chapter explains Margin Shift, Erase, Dual Page Copy, and other special modes. SPECIAL MODES When the [Special Modes] key is pressed in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the keys to move between the screens.
Page 155 COPIER Special modes menu (2nd screen) Special Modes Colour Stamp Image Edit Adjustments File Quick File Proof Copy Mixed Size Original Slow Scan Original Count Mode [Stamp] key [Proof Copy] key* PRINTING THE DATE AND A STAMP ON COPIES CHECKING COPIES BEFORE PRINTING (Proof (Stamp) (page 2-84) Copy)
Page 156 COPIER [OK] key and [Cancel] key In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as follows: Special Modes Cancel Margin Shift Right Left Down Side 1 Side 2 (0~20) (0~20) (A) Enter the selected special mode settings and return to the base screen of copy mode.
Page 157: Adding Margins (Margin Shift)
COPIER ADDING MARGINS (Margin Shift) This function is used to shift the copy image right, left or down to adjust the margin. This is convenient when you wish to bind the copies with a string or in a binder. Shifting the image to the right so the copies can be bound at the left edge with a string Not using margin shift Using margin shift The punch holes cut off...
Page 158 COPIER Press the [COLOUR START] key or the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 159: Erasing Peripheral Shadows (Erase)
COPIER ERASING PERIPHERAL SHADOWS (Erase) The erase function is used to erase shadows around the edges of copies that occur when copying thick originals or books. When a thick book is copied Not using the erase Using the erase function function Shadows appear here Shadows appear on the...
Page 160 COPIER Select the erase settings. (1) Touch the desired erase mode. Special Modes Select one of the four positions. Cancel Erase Touch the [Side Erase] key to open the following screen. Edge Centre Edge+Centre Erase Edge Centre Erase Erase Erase Side Erase Cancel (0~20)
Page 161: Copying Each Facing Page Of Abound Document (Dual
COPIER COPYING EACH FACING PAGE OF A BOUND DOCUMENT (Dual Page Copy) The dual page copy function produces separate copies of two document pages that are placed side by side on the document glass. This function is useful when making copies of the facing pages of a book or other bound document. Copying the facing pages of a book or bound document Book or bound document The facing pages are copied...
Page 162 COPIER Select Dual Page Copy. (1) Touch the [Special Modes] key. Special Modes SPECIAL MODES (page 2-41) Dual Page Margin Shift Erase (2) Touch the [Dual Page Copy] key so that it is Copy highlighted. Tandem Pamphlet Copy Copy Build (3) Touch the [OK] key.
Page 163: Making Copies In Pamphlet Format (Pamphlet Copy)
COPIER MAKING COPIES IN PAMPHLET FORMAT (Pamphlet Copy) This function copies 2 original pages onto the front side and 2 original pages onto the reverse side of each sheet of paper so that the copies can be folded at the centreline to form a pamphlet. This function is convenient for arranging copies into an attractive booklet or pamphlet.
Page 164 COPIER Select pamphlet copy settings. Special Modes Cancel (1) If the original is 1-sided, touch the [1-Sided] Pamphlet Copy key. If the original is 2-sided, touch the [2-Sided] key. (2) Select the binding edge ([Left Binding] or Original Left Right 1-Sided 2-Sided [Right Binding]).
Page 165 COPIER Touch the [OK] key. Special Modes You will return to the base screen of copy mode. Cancel Pamphlet Copy Original Left Right 1-Sided 2-Sided Binding Binding Cover Setting Press the [COLOUR START] key or the [BLACK & WHITE START] key. Copying will begin.
Page 166: Copying A Large Number Of Originals At Once (Job Build)
COPIER COPYING A LARGE NUMBER OF ORIGINALS AT ONCE (Job Build) This function requires the automatic document feeder to be installed. When copying a very large number of originals, this function allows you to divide the originals into sets and feed each set through the automatic document feeder one set at a time.
Page 167 COPIER Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the first set of originals. Scanning begins. To cancel scanning... Press the [STOP] key ( Insert the next set of originals and press the [COLOUR START] key or the [BLACK &...
Page 168 COPIER Changing the copy settings for each set of originals The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals. Perform the step below before pressing the [Start] key to scan the originals in step 4 above. Touch the [Change] key.
Page 169: Using Two Machines To Make A Large Number Of Copies (Tandem Copy)
COPIER USING TWO MACHINES TO MAKE A LARGE NUMBER OF COPIES (Tandem Copy) (The productivity kit is required.) Two machines connected to the same network can be used to run a large copy job in parallel. Each machine prints half of the copies, reducing the time required to complete the job. Master machine and slave machine In the following explanation, the master machine is the machine that is used to scan the originals.
Page 170 COPIER Set the number of copies (number of sets) with the numeric keys. Up to 999 copies (sets) can be set. When the [COLOUR START] key or the [BLACK & WHITE START] key is pressed, the copies will automatically be divided between the master and slave machines.
Page 171 COPIER In this situation... If a machine runs out of paper If either the master machine or the slave machine run out of paper, the machine that ran out of paper will hold the job while the machine that still has paper continues the job. When paper is added to the machine that ran out, the job resumes. When user authentication is enabled User authentication is enabled in the master machine: tandem copying is possible.
Page 172: Using A Different Paper Type For Covers (Covers/Inserts)
COPIER USING A DIFFERENT PAPER TYPE FOR COVERS (Covers/Inserts) A different type of paper can be inserted in positions corresponding to front and back covers of a copy job when the automatic document feeder is used. A different type of paper can also be automatically added as an insert at specified pages.
Page 173: Inserting Covers In Copies (Cover Settings)
COPIER INSERTING COVERS IN COPIES (Cover Settings) A different type of paper can be inserted at the positions corresponding to the front and back covers of a copy job. This is useful for arranging documents in an attractive format and for using a different type of paper as a cover on an estimate sheet or similar document.
Page 174 COPIER Select cover settings. (1) If the cover sheet will be copied on, touch Covers/Inserts the [Yes] key. Otherwise, touch the [No] Front Cover Setting Cancel key. Paper Tray Print on Front Cover If the [No] key is touched, only cover insertion will be Bypass performed.
Page 175 COPIER Touch the [OK] key. Special Modes You will return to the base screen of copy mode. Cancel Covers/Inserts You can touch the [Insertion Type A] key or the [Insertion Type Inserts Setting Cover Setting B] key to select insert settings. Insertion Front Cover...
Page 176: Inserting Insert Sheets In Copies (Insert Settings)
COPIER INSERTING INSERT SHEETS IN COPIES (Insert Settings) You can have different paper automatically inserted as inserts at specified pages of copies. Two types of paper can be used as inserts, and the insertion positions can be specified separately for each. Covers can be used in combination with inserts.
Page 177 COPIER Select insert settings. (1) If the insert will be copied on, touch the Covers/Inserts Cancel [Yes] key. Otherwise, touch the [No] key. Insertion Type A Settings If the [No] key is touched, only insert sheet insertion will Paper Tray Print on Insert Sheets be performed.
Page 178 COPIER Touch the [Insertion Settings] key. Special Modes Cancel Covers/Inserts Cover Setting Inserts Setting Insertion Front Type A Cover Insertion Settings Insertion Back Cover Type B Tray Settings Page Layout Specify the pages where inserts A and B will be inserted. Covers/Inserts Insertion Settings (1) Touch the [Insertion Type A] key or the...
Page 179: Changing Cover/Insert Settings
COPIER Touch the [OK] key. Special Modes You will return to the base screen of copy mode. Cancel Covers/Inserts To select cover settings, touch the [Front Cover] key or the Inserts Setting Cover Setting [Back Cover] key. Insertion Front Type A Cover INSERTING COVERS IN COPIES (Cover Settings) (page...
Page 180: Changing Cover/Insert Settings
COPIER CHANGING COVER/INSERT SETTINGS (Page Layout) Cover settings and insert settings can be combined. This section explains how to check completed cover and insert insertion page settings, and change or delete insertion pages. Changing insert A from page 4 to page 5 4th page, insert A 5th page, insert A 7th page, insert B...
Page 181 COPIER Example: Touch insert A at page 4 Touch the key of the page that you wish to delete or change. Covers/Inserts If you do not need to change the setting, touch the [OK] key Page Layout and go to step 6. •...
Page 182 COPIER Change the settings for insert type A/B. Covers/Inserts The settings are changed in the same way as they are initially Insertion Amend configured. See step 7 of "INSERTING INSERT SHEETS IN COPIES (Insert Settings)" (page 2-63) to change the insert Insertion Page settings.
Page 183: Adding Inserts When Copying On Transparency Film
COPIER ADDING INSERTS WHEN COPYING ON TRANSPARENCY FILM (Transparency Inserts) When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.
Page 184 COPIER Select insert settings. (1) Select whether or not the insert paper will Special Modes be copied on ([Yes] or [No]). Cancel Transparency Inserts (2) Touch the [OK] key. Paper Tray Print on Insert Sheets You will return to the base screen of copy mode. Tray1 Explanation of (A) When transparency inserts is selected, paper suitable for...
Page 185: Copying Multiple Originals Onto One Sheet (Multi Shot)
COPIER COPYING MULTIPLE ORIGINALS ONTO ONE SHEET (Multi Shot) Multiple original pages can be copied onto a single sheet of paper in a uniform layout. Select 2in1 to copy two original pages onto one sheet, or 4in1 to copy four original pages onto one sheet. This function is convenient when you wish to present multiple pages in a compact format, or show a view of all pages in a document.
Page 186 COPIER Select the number of originals to be (3) (2) copied onto one sheet of paper, the Special Modes layout, and the border. Multi Shot Cancel (1) Touch the [2in1] key or the [4in1] key. Layout If needed, the images will be rotated. 2in1 4in1 (2) Select the layout.
Page 187: Copying A Pamphlet (Book Copy)
COPIER COPYING A PAMPHLET (Book Copy) This function is used to make a copy of the two facing pages of an open book or other bound document. Copies made with this function can be folded at the centre to create a booklet. This function is convenient for arranging copies into an attractive booklet or pamphlet.
Page 188 COPIER Select book copy settings. (1) Select the binding position ([Left Binding] Special Modes or [Right Binding]). Book Copy Cancel (2) To insert a cover, touch the [Cover Setting] key. If a cover will not be added, go to step 4. Left Right Binding...
Page 189 COPIER Touch the [OK] key. Special Modes You will return to the base screen of copy mode. Book Copy Cancel Left Right Binding Binding Cover Setting Place the original face down on the document glass. Place the opened front cover and back cover face down. Press the [COLOUR START] key or the [BLACK &...
Page 190 COPIER Touch the [Read-End] key. Place next original. Press [Start]. Copying will begin. When finished, press [Read-End]. Read-End To cancel scanning and copying... Press the [STOP] key ( • "Cover Setting" can be used when a reversing single pass feeder is installed. •...
Page 191: Copying Captions Onto Tab Paper (Tab Copy)
COPIER COPYING CAPTIONS ONTO TAB PAPER (Tab Copy) Captions can be copied onto the tabs of tab paper. Prepare appropriate originals for the tab captions. Tab copy is possible from the bypass tray. Prepare originals that The image is shifted match the tab positions.
Page 192 COPIER Tab copying with a right binding Originals Placing the originals Loading tab paper • Document feeder tray Originals Insert the originals so that the side with no tab text enters first. • Document glass Reverse Final image side Load the tab paper so that the tab on the first sheet is away from you.
Page 193 COPIER Load the tab paper. When using the bypass tray, place the paper with the print side Reverse side down. Place the paper so that the sides with the tabs enter the machine last. After loading the tab paper, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY"...
Page 194: Copying Both Sides Of A Card On One Sheet Of Paper (Card Shot)
COPIER COPYING BOTH SIDES OF A CARD ON ONE SHEET OF PAPER (Card Shot) When copying a card, this function allows you to copy the front and reverse sides together onto a single sheet of paper. This function is convenient for making copies for identification purposes and helps save paper. Copies Originals Front...
Page 195 COPIER Select card shot settings. (1) Enter the original size. Special Modes With the [X] key highlighted, enter the X (horizontal) Cancel Card Shot dimension of the original with the keys. Touch the [Y] key and enter the Y (vertical) dimension of (25~210) Fit to the original with the...
Page 196 COPIER • The original must be placed on the document glass. • Copying is only possible on standard size paper. • XY Zoom cannot be used when using this function. • The image cannot be rotated when using this function. To cancel card shot...
Page 197: Printing The Date And A Stamp On Copies (Stamp)
COPIER PRINTING THE DATE AND A STAMP ON COPIES (Stamp) Use this function to print the date, a stamp, the page number, and text on copies. In addition, specific text can be added to a copy as a watermark. (Watermark)* Six printing positions are available: top left, top centre, top right, bottom left, bottom centre, and bottom right.
Page 198: General Procedure For Using Stamp
COPIER GENERAL PROCEDURE FOR USING STAMP To select stamp settings, follow the steps below. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens.
Page 199 COPIER Select Stamp. Special Modes For detailed information on each of the stamp items, see the Stamp Cancel following sections: Date: ADDING THE DATE TO COPIES (Date) Date Stamp (page 2-88) Page Stamp: STAMPING COPIES (Stamp) (page 2-90) Text Numbering Page numbering: PRINTING PAGE NUMBERS ON COPIES (Page Numbering)
Page 200 COPIER Press the [COLOUR START] key or the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 201: Adding The Date To Copies (Date)
COPIER ADDING THE DATE TO COPIES (Date) The date can be printed on copies. The position of the date, colour, format, and page (first page only or all pages) can be selected. Example: Printing APRIL 4, 2013 in the top right corner of the paper. 04/APR/2013 Touch the [Date] key in the stamp selection screen.
Page 202 COPIER Check the displayed date. If you need to Stamp change the date, touch the [Date Cancel Date Change] key. First Page YYYY/MM/DD Print Colour Set the date that you wish to use and touch the [OK] key. Bk(Black) MM/DD/YYYY All Pages Stamp DD/MM/YYYY...
Page 203: Stamping Copies (Stamp)
COPIER STAMPING COPIES (Stamp) Text such as "CONFIDENTIAL" can be printed in white on a dark background as a "stamp" on copies. The position, colour, size, density, and pages (first page only or all pages) can be selected for a stamp. Printing "CONFIDENTIAL"...
Page 204 COPIER Touch the [Print Colour] key and set the Stamp colour and density. Stamp Cancel Touch the colour that you wish to use. CONFIDENTIAL PRIORITY First Page If you wish to darken the selected colour, touch the key. Print Colour FOR YOUR INFO.
Page 205: Printing Page Numbers On Copies
COPIER PRINTING PAGE NUMBERS ON COPIES (Page Numbering) Page numbers can be printed on copies. The position, colour, format, and page number can be selected for page numbering. Printing the page number at the bottom centre of the paper. Touch the [Page Numbering] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP"...
Page 206 COPIER Touch the [Print Colour] key. Stamp Touch the colour that you wish to use. Page Numbering Cancel When you have finished selecting the settings, touch the [OK] Print Colour key. Page Numbering Format Bk(Black) 1,2,3.. (1),(2),(3).. Total Page Stamp -1-,-2-,-3-..
Page 207 COPIER If covers/inserts will be inserted, touch Stamp the [Covers/Inserts Counting] key if you Page Number want to include the covers/inserts in the Auto page number count and want page Manual First Number Last Number numbers printed on the covers/inserts. Covers/Inserts Auto Counting...
Page 208 COPIER • When Page Numbering is selected, copying in group mode is not possible. The mode automatically changes to sort mode. • When the page number printing position is set to the right side or left side and pamphlet copy or book copy is used, the print position is changed so that the page numbers always appear on the outer side of each opened page (the left and right sides of the opened pages).
Page 209: Printing Text On Copies (Text)
COPIER PRINTING TEXT ON COPIES (Text) Entered text can be printed on copies. Up to 30 frequently used text strings can be stored. Example: Printing "April 2013 Planning Meeting" in the top left corner of the paper April 2013 Planning Meeting Touch the [Text] key in the stamp selection screen.
Page 210 COPIER Touch the [Print Colour] key. Stamp Touch the colour that you wish to use. When you have finished Text Cancel selecting the settings, touch the [OK] key. First Page AAA AAA Stamp Print Colour Print Colour Pre-Set All Pages Bk(Black) Recall Store/Delete...
Page 211 COPIER Storing, editing, and deleting text strings Touch the [Text] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP" (page 2-85). Touch the [Store/Delete] key. Stamp Cancel Text First Page Print Colour Pre-Set All Pages Bk(Black)
Page 212 COPIER Touch the [Back] key. Stamp Stamp You will return to the screen of step 2. Text Text Back To copy using a stored text string, continue from step 2 of "PRINTING TEXT ON COPIES (Text)" (page 2-96). Store/Delete Store/Delete No.01 AAA AAA No.02 BBB BBB No.03 CCC CCC...
Page 213: Checking The Stamp Layout (Layout)
COPIER CHECKING THE STAMP LAYOUT (Layout) After stamp items have been selected, you can check the print layout, change the print position, and delete stamp items. Touch the [Layout] key. Special Modes Cancel Special Modes Stamp Date Page Text Numbering Watermark Layout The [Layout] key can only be touched when stamp items have been selected.
Page 214 COPIER Touch the key of the desired destination Stamp position. Move Select the location to move the selected item. The touched position key is highlighted and the print position changes. The keys that show the print positions will appear as follows depending on the state of the settings.
Page 215: Adding A Watermark To A Copy (Watermark)
COPIER ADDING A WATERMARK TO A COPY (Watermark) (The productivity kit is required.) When making a copy, specific text can be added to the copy as a watermark. The colour, density, angle, and pages (first page only or all pages) can be selected for a watermark. The watermark is printed at the centre of the paper. Printing "CONFIDENTIAL"...
Page 216 COPIER Touch the [Print Colour] key and set the Stamp colour and density. Watermark Cancel Touch the colour that you wish to use. CONFIDENTIAL PRIORITY Print Colour First Page If you wish to darken the selected colour, touch the key. FOR YOUR INFO.
Page 217: [Image Edit] Key
COPIER [Image Edit] KEY When the [Image Edit] key is touched in the 2nd special modes menu screen, the image edit menu screen opens. Image edit menu screen Special Modes Special Modes Image Edit Colour Stamp Image Edit Adjustments Multi-Page Mirror Photo Repeat File...
Page 218: Repeating Photos On A Copy (Photo Repeat)
COPIER REPEATING PHOTOS ON A COPY (Photo Repeat) Photo Repeat is used to create repeated images of a photo-size original (130 mm x 90 mm size, 100 mm x 150 mm size, 70 mm x 100 mm size, 65 mm x 70 mm size or 57 mm x 100 mm size (3" x 5" size, 5" x 7" size, 2-1/2" x 4" size, 2-1/2"...
Page 219 COPIER Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Image Edit] key. (4) Touch the [Photo Repeat] key. [Image Edit] KEY (page 2-104) Select Photo Repeat settings. (1) Touch the key showing the original type Image Edit and paper size combination that you want...
Page 220: Creating A Large Poster (Multi
COPIER CREATING A LARGE POSTER (Multi-Page Enlargement) This function is used to enlarge an image of an original and print it as a composite image using multiple sheets of paper. Original (A4 (8-1/2" x 11") size) Copy (enlarged image on 8 sheets of A3 (11"...
Page 221 COPIER Set the enlargement size and the original size. Ready to scan for copy. Copies will be delivered in 2 parts. (1) Select the size system that you wish to use Image Edit for multi-page enlargement. Border Print Cancel Multi-Page Enlargement Touch the keys to display the screen that shows Enlargement Size...
Page 222 COPIER Touch the [OK] key. Image Edit You will return to the special modes screen. Touch the [OK] key Border Print Cancel Multi-Page Enlargement to return to the base screen of copy mode. Enlargement Size Original Size Original Orientation (A Size) A0x2 Press the [COLOUR START] key or the [BLACK &...
Page 223: Reversing The Image (Mirror Image)
COPIER REVERSING THE IMAGE (Mirror Image) This feature is used to make a copy that is a mirror image of the original. Original Mirror image copy Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 224: Copying A3 (11" X 17") Originals With No Edge Cut-Off (A3 (11" X 17") Full Bleed)
COPIER COPYING A3 (11" x 17") ORIGINALS WITH NO EDGE CUT-OFF (A3 (11" x 17") Full Bleed) This feature lets you copy an entire A3 (11" x 17") size original at full size with no image cut-off at the edges. A3W (12"...
Page 225 COPIER Place A3W (12" x 18") paper in the bypass tray. Pull out the extension tray, adjust the guides to the width of A3W (12" x 18") paper, and place the paper in the bypass tray. After loading the paper, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY"...
Page 226: Copying In The Centre Of The Paper (Centring)
COPIER COPYING IN THE CENTRE OF THE PAPER (Centring) This is used to centre the copied image on the paper. This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the image is reduced.
Page 227 COPIER • The image can be reduced when using the centring function, but not enlarged. • When the original size or the paper size is displayed as a special size, this function cannot be used. To cancel centring... Touch the [Centring] key in the screen of step 3 so that it is not highlighted. 2-114 Contents...
Page 228: Reversing White And Black In Acopy (B/W Reverse)
COPIER REVERSING WHITE AND BLACK IN A COPY (B/W Reverse) This is used to reverse black and white in a copy to create a negative image. This function can only be used for black and white copying. Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption.
Page 229 COPIER • When this function is selected, the "Original Image Type" setting for exposure adjustment automatically changes to "Text". • This function is not available in some countries and regions. To cancel B/W reverse... Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted. 2-116 Contents...
Page 230: [Colour Adjustments] Key
COPIER [Colour Adjustments] KEY When the [Colour Adjustments] key is touched in the 2nd special modes menu screen, the colour adjustments menu screen opens. Colour adjustments menu screen Special Modes Special Modes Colour Adjustments Colour Stamp Image Edit Adjustments RGB Adjust Sharpness Suppress File...
Page 231: Adjusting Red/Green/Blue In Copies (Rgb Adjust)
COPIER ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) This feature is used to strengthen or weaken any one of the three colour components R (red), G (green), or B (blue). R(Red)+ G(Green)+ B(Blue)+ Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 232: Adjusting The Sharpness Of An Image (Sharpness)
(3) Touch the [Colour Adjustments] key. (4) Touch the [Sharpness] key. [Colour Adjustments] KEY (page 2-117) Adjust the image. (1) Touch the [Soft] key or the [Sharp] key. Colour Adjustments (2) Touch the [OK] key. Cancel Sharpness You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode.
Page 233: Whitening Faint Colours In Copies (Suppress Background)
COPIER WHITENING FAINT COLOURS IN COPIES (Suppress Background) This feature is used to suppress light background areas. Level [+] The lightness level at which suppression takes place can be adjusted. Light areas are suppressed. Level [-] Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 234 COPIER Press the [COLOUR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 235: Adjusting The Colour (Colour Balance)
COPIER ADJUSTING THE COLOUR (Colour Balance) The colour, tone, and density of colour copies can be adjusted. Each of the colours yellow, cyan, magenta, and black Light Dark are divided into 8 gradations from light to dark, and the average density of each gradation can be adjusted, or all eight gradations can be adjusted at once.
Page 236 COPIER Adjust the colour balance. (2), (3) (1) Select the colour to be adjusted. Colour Adjustments Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black). Cancel Colour Balance If only the rectangular area around the letter in a key is highlighted, the settings have been changed from the factory default settings.
Page 237: Adjusting The Brightness Of Acopy (Brightness)
COPIER ADJUSTING THE BRIGHTNESS OF A COPY (Brightness) The brightness of colour images can be adjusted. Darker Original Brighter Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key.
Page 238: Adjusting The Intensity Of A Copy (Intensity)
COPIER ADJUSTING THE INTENSITY OF A COPY (Intensity) This is used to adjust the intensity (saturation) of colour images. Weakening the Original Strengthening intensity the intensity Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 239: Checking Copies Before Printing (Proof Copy)
COPIER CHECKING COPIES BEFORE PRINTING (Proof Copy) (The productivity kit is required.) This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked for errors, the remaining sets can be printed. Previously it was necessary to re-scan the original each time changes to settings were required.
Page 240 COPIER Set the number of copies (number of sets) with the numeric keys. If you will copy multiple originals using the document glass, Special Modes switch to sort mode after this step. Sort mode (page 2-35) 2-Sided Copy Plain Up to 999 copies (sets) can be set. If an incorrect number of copies is set...
Page 241 COPIER Change the settings. (1) Touch the key of the setting that you want Proof Copy to change. The setting screen of the touched key opens. Change the settings and touch the [OK] key. (2) Touch the [OK] key. Colour Mode Paper Select 2-Sided Copy Output...
Page 242: Checking The Number Of Scanned Original Sheets Before Copying (Original Count)
COPIER CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE COPYING (Original Count) The number of scanned original sheets can be counted and displayed before copying is executed. By allowing you to check the number of original sheets that were scanned, this helps reduce the occurrence of copy mistakes. Insert the originals face up in the document feeder tray.
Page 243 COPIER After scanning is finished, check the number of sheets that were scanned and 130 pages of original have been scanned. touch the [OK] key. Copy the scanned data? Copying will begin. • When job build mode is used, the number of scanned sheets Cancel appears when the [Read-End] key is touched.
Page 244: Copying Originals Of Different Sizes (Mixed Size Original)
COPIER COPYING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) Originals that are A3 size and A4 size (11" x 17" size and 8-1/2" x 11" size) can be placed together in the automatic document feeder and copied. When scanning the originals, the machine automatically detects the size of each original and uses paper appropriate for that size.
Page 245 COPIER Select Mixed Size Original. (1) Touch the [Special Modes] key. Special Modes Special modes menu (2nd screen) (page 2-42) Colour Stamp Image Edit (2) Touch the keys to switch through the Adjustments screens. File Quick File Proof Copy (3) Touch the [Mixed Size Original] key so that Mixed Size Original Slow Scan...
Page 246: Copying Thin Originals
COPIER COPYING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. Insert the originals face up in the document feeder tray. Indicator line Insert the originals all the way into the document feeder tray.
Page 247 COPIER • This function can only be used when a reversing single pass feeder is installed. • The "2-Sided to 2-Sided" and "2-Sided to 1-Sided" modes of automatic 2-sided copying cannot be used. To cancel the slow scan mode setting... Touch the [Slow Scan Mode] key in the screen of step 2 so that it is not highlighted.
Page 248: Convenient Copy Functions
COPIER CONVENIENT COPY FUNCTIONS This section explains convenient copy functions such as interrupting a copy run, changing the order of reserved copy jobs, and storing copy settings in a program. INTERRUPTING A COPY RUN (Interrupt copy) When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy. Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job first.
Page 249 COPIER • If user authentication is enabled, the login screen will appear when the [Interrupt] key is pressed. Enter your user name and password to log in. The number of copies made will be added to the count of the user that logged in. •...
Page 250: Checking A Preview Image Of A Copy (Preview)
COPIER CHECKING A PREVIEW IMAGE OF A COPY (Preview) (The productivity kit is required.) You can touch the [Preview] key so that it is highlighted in the base screen and then scan the original to check a preview image of the copy in the touch panel before printing the copy. Place the original.
Page 251 COPIER To cancel the operation... Press the [CLEAR ALL] key ( System Settings (Administrator): Default Preview You can set the default state of the [Preview] key to always selected (highlighted). Enable this setting if you wish to check a preview image each time you make a copy. 2-138 Contents...
Page 252: Preview Screen
COPIER PREVIEW SCREEN The preview screen is explained below. Reset Preview Colour Display Output Function Rev. Display Rotation Start Copy 0001 /0010 Preview image [Display Output] key An image of the selected received image appears. Touch to show the selected modes and settings as icons. If the image is cut off, use the scroll bars at the right and Functions that are displayed are as follows: bottom of the screen to scroll the image.
Page 253: Job Status Screen
COPIER JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the touch panel is touched. The job status screen shows the status of jobs by mode. When the [JOB STATUS] key is touched, the job status screen of the mode that was being used before the key was pressed appears.
Page 254: Job Queue Screen And Completed Job Screen
COPIER JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of the job queue screen that shows copy and print jobs waiting to be printed and the job currently in progress, the completed job screen that shows jobs that have been completed, and the spool screen that shows print jobs that have been spooled and encrypted PDF jobs that are waiting for a password to be entered.
Page 255 COPIER Job key display Each job key shows the position of the job in the job queue and the current status of the job. Copy 002/000 Waiting Indicates the number (position) of the job in the job Status queue. Shows the job status. When the job currently being printed is finished, the job Message Status...
Page 256: Cancelling A Job That Is Waiting In The Queue
COPIER CANCELLING A JOB THAT IS WAITING IN THE QUEUE A copy job that is waiting to be printed can be cancelled. Press the [JOB STATUS] key ( Cancel the job. (1) Touch the [Print Job] tab. Print Job Scan to Fax Job Internet Fax Job Queue...
Page 257: Giving Priority To A Job In The Queue
COPIER GIVING PRIORITY TO A JOB IN THE QUEUE If a copy job is begun when there are already multiple jobs in the queue, the copy job will appear at the end of the queue. However, if you have an urgent copy job, you can give priority to the job and have it executed first. Press the [JOB STATUS] key ( Give the desired job priority.
Page 258: Checking Information On A Copy Job Waiting In The Queue
COPIER CHECKING INFORMATION ON A COPY JOB WAITING IN THE QUEUE Detailed information can be displayed on a copy job waiting in the queue. Press the [JOB STATUS] key ( Checking job details (1) Touch the [Print Job] tab. Print Job Scan to Fax Job Internet Fax...
Page 259: Storing Copy Operations (Job Programs)
COPIER STORING COPY OPERATIONS (Job Programs) A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings can be retrieved and used for a copy job by means of a simple operation. For example, suppose A3 (11"...
Page 260: Storing (Editing/Deleting) A Job Program
COPIER STORING (EDITING/DELETING) A JOB PROGRAM The procedures for storing copy settings in a job program and deleting a job program are explained below. Press the [#/P] key. LOGOUT Touch the [Store/Delete] tab. Exit Job Programs Press program number. Recall Store/Delete Touch a numeric key.
Page 261 COPIER Select the copy settings that you wish to To store, make selections and press Cancel [OK], to delete, press [Cancel]. store in the job program and touch the Colour Mode Special Modes Full Colour [OK] key. 2-Sided Copy Plain To assign a name to the program, touch the [Program Name] Output Exposure...
Page 262: Appendix
COPIER APPENDIX Examples of covers and inserts The relations between the originals and finished copies when covers or inserts are inserted are shown on the following pages. Covers • 1-sided copying of 1-sided originals • 2-sided copying of 1-sided originals •...
Page 263 COPIER Covers (1-sided copying of 1-sided originals) 1-sided copies are made of the following 1-sided originals. 1st page 2nd page 3rd page 4th page 5th page 6th page Cover copying condition Resulting copies Front cover Back cover No copying No copying 1-sided No copying copying...
Page 264 COPIER Covers (2-sided copying of 1-sided originals) 2-sided copies are made of the following 1-sided originals. 1st page 2nd page 3rd page 4th page 5th page 6th page Cover copying condition Resulting copies Front cover Back cover No copying No copying 1-sided No copying copying...
Page 265 COPIER Covers (1-sided copying of 2-sided originals) 1-sided copies are made of the following 2-sided originals. 1st page 2nd page 3rd page Cover copying condition Resulting copies Front cover Back cover No copying No copying 1-sided No copying copying 2-sided No copying copying 1-sided...
Page 266 COPIER Covers (2-sided copying of 2-sided originals) 2-sided copies are made of the following 2-sided originals. 1st page 2nd page 3rd page Cover copying condition Resulting copies Front cover Back cover No copying No copying 1-sided No copying copying 2-sided No copying copying 1-sided...
Page 267 COPIER Inserts (copying of 1-sided originals) 1-sided and 2-sided copying of the following 1-sided originals. The example of adding an insert at the 3rd sheet is shown. (when "Insertion Page" is set to "3" in the insertion settings of the insert settings in the special modes) 1st page 2nd page 3rd page...
Page 268 CHAPTER 3 PRINTER This chapter provides detailed explanations of the procedures for using the printer function. PRINTER FUNCTION OF THE MACHINE ..3-3 CONVENIENT PRINTING FUNCTIONS PRINTING FROM WINDOWS CONVENIENT FUNCTIONS FOR CREATING PAMPHLETS AND POSTERS .
Page 269 PRINTER PRINT FUNCTIONS FOR SPECIAL CHECKING THE PRINT STATUS PURPOSES ......3-50 JOB STATUS SCREEN .
Page 270: Printer Function Of The Machine
Printer driver type Remarks Sharp Advanced Printing Language-c Can be used in the This is the SHARP proprietary printer driver. The printer driver standard machine compresses the data in each print job before sending the job to the configuration.* machine, enabling smooth printing.
Page 271: Printing From Windows
PRINTER PRINTING FROM WINDOWS BASIC PRINTING PROCEDURE The following example explains how to print a document from "WordPad", which is a standard accessory program in Windows. Select [Print] from the button of WordPad. If you are using Windows Vista, click the [File] menu. The menu used to execute printing may vary depending on the software application.
Page 272 PRINTER Select print settings. (1) Click the [Paper] tab. (2) Select the paper size. To select settings on other tabs, click the desired tab and then select the settings. (3) Click the [OK] button. • Make sure the paper size is the same as the paper size set in the software application. •...
Page 273: Selecting The Paper
PRINTER SELECTING THE PAPER This section explains how to configure the "Paper Selection" setting on the [Paper] tab of the printer driver properties window. Before printing, check the paper sizes, paper types, and paper remaining in the machine's trays. To view the most recent tray information, click the [Tray Status] button. •...
Page 274: Printing On Envelopes
PRINTER PRINTING ON ENVELOPES The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope from the printer driver properties screen is described below. For the types of paper that can be used in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
Page 275: Printing When The User Authentication Function Is Enabled
PRINTER PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authentication function is enabled in the machine's system settings (administrator), your user information (login name, password, etc.) must be entered in the printer driver properties window before you can print. The information that must be entered varies depending on the authentication method being used, so check with the administrator of the machine before printing.
Page 276 PRINTER Enter your login name and password. (1) Click the [Job Handling] tab. (2) Enter your user information. • When authentication is by login name/password Select the [Login Name] and [Password] checkboxes so that checkmarks appear, and enter your login name and password. Enter 1 to 32 characters for the password.
Page 277 PRINTER • When user authentication is enabled in the system settings (administrator), printing is possible without entering user information if black and white printing is set in the printer driver. For black and white print settings, see "BLACK AND WHITE PRINTING"...
Page 278: Viewing Printer Driver Help
PRINTER VIEWING PRINTER DRIVER HELP When selecting settings in the printer driver, you can display Help to view explanations of the settings. Open the printer driver properties window from the print window of the software application. (1) Select the printer driver of the machine. (2) Click the [Preferences] button.
Page 279: Saving Frequently Used Print Settings
PRINTER SAVING FREQUENTLY USED PRINT SETTINGS Settings configured on each of the tabs at the time of printing can be saved as user settings. Saving frequently used settings or complex colour settings under an assigned name makes it easy to select those settings the next time you need to use them.
Page 280 PRINTER Check and save the settings. (1) Check the displayed settings. (2) Enter a name for the settings (maximum of 20 characters). (3) Click the [OK] button. Click the [OK] button. Start printing. • Up to 30 sets of user settings can be saved. •...
Page 281: Using Saved Settings
PRINTER USING SAVED SETTINGS Open the printer driver properties window from the print window of the software application. (1) Select the printer driver of the machine. (2) Click the [Preferences] button. DX-xxxx The button that is used to open the printer driver properties window (usually [Properties] or [Printing Preferences]) may vary depending on the software application.
Page 282: Changing The Printer Driver Default Settings
PRINTER CHANGING THE PRINTER DRIVER DEFAULT SETTINGS The default settings of the printer driver can be changed using the procedure below. The settings selected using this procedure are saved and become the default settings when printing from a software application. (Settings selected in the printer driver properties window when printing from an application remain in effect only while the application is in use.) Click the [Start] button (...
Page 283 PRINTER Configure the settings and click the [OK] button. For explanations of the settings, see printer driver Help. 3-16 Contents...
Page 284: Printing From A Macintosh
PRINTER PRINTING FROM A MACINTOSH BASIC PRINTING PROCEDURE The following example explains how to print a document from the standard accessory program "TextEdit" in Mac OS X. To use the machine as a printer for the Macintosh, the PS3 expansion kit must be installed in the machine and the machine must be connected to a network.
Page 285: Printing
PRINTER PRINTING Select [Print] from the [File] menu of TextEdit. The menu used to execute printing may vary depending on the software application. Make sure that the correct printer is selected. The machine name that appears in the "Printer" menu is normally [SCxxxxxx]. ("xxxxxx" is a sequence of characters that varies depending on the machine model.) Select print settings.
Page 286 PRINTER Click the [Print] button. Printing begins. 3-19 Contents...
Page 287: Selecting The Paper
PRINTER SELECTING THE PAPER This section explains the [Paper Feed] settings in the print settings window. • When [Auto Select] is selected A tray with plain paper or recycled paper (the factory default setting is plain paper only) of the size specified in "Paper Size"...
Page 288: Printing On Envelopes
PRINTER PRINTING ON ENVELOPES The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope from the printer driver properties screen is described below. For the types of paper that can be used in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
Page 289: Printing When The User Authentication Function Is Enabled
PRINTER PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authentication function is enabled in the machine's system settings (administrator), you must enter your user information (login name, password, etc.) in order to print. The information that must be entered varies depending on the authentication method being used, so check with the administrator of the machine before printing.
Page 290 PRINTER Start printing. (1) Enter your user information. • When authentication is by login name/password Enter your login name in "Login Name" and your password in "Password" (1 to 32 characters). • When authentication is by user number Enter your user number (5 to 8 digits) in "User Number".
Page 291: Frequently Used Functions
PRINTER FREQUENTLY USED FUNCTIONS This section explains frequently used functions. • SELECTING THE COLOUR MODE • PRINTING MULTIPLE PAGES ON ONE PAGE • TWO-SIDED PRINTING (page 3-27) (page 3-30) • FITTING THE PRINT IMAGE TO THE PAPER • STAPLING OUTPUT/PUNCHING HOLES IN (page 3-29) OUTPUT (page 3-33)
Page 292 PRINTER BLACK AND WHITE PRINTING [Black and White] can be selected on the [Main] tab as well as on the [Color] tab. Click the [Black and White Print] checkbox on the [Main] tab so that a checkmark appears. The [Black and White Print] checkbox on the [Main] tab and the "Color Mode" setting on the [Color] tab are linked. When the [Black and White Print] checkbox is selected on the [Main] tab, [Black and White] is also selected on the [Color] tab.
Page 293: Selecting A Print Mode Setting
PRINTER SELECTING A PRINT MODE SETTING This section explains the procedure for selecting a print mode setting. The "Print Mode Settings" consist of the following two items: Normal: This mode is suitable for printing data such as regular text or a table. High Quality: The print quality of colour photos and text is high.
Page 294: Two-Sided Printing
PRINTER TWO-SIDED PRINTING The machine can print on both sides of the paper. This function is useful for many purposes, and is particularly convenient when you want to create a simple pamphlet. Two-sided printing also helps conserve paper. Paper Print results orientation Windows Macintosh...
Page 295 PRINTER Macintosh (1) Select [Layout]. (2) Select [Long-edged binding] or [Short-edged binding]. 3-28 Contents...
Page 296: Fitting The Print Image To The Paper
PRINTER FITTING THE PRINT IMAGE TO THE PAPER This function is used to automatically enlarge or reduce the printed image to match the size of the paper loaded in the machine. This is convenient for such purposes as enlarging an A4 or letter size document to A3 or ledger size to make it easier to view, and to print when the same size of paper as the document image is not loaded in the machine.
Page 297 PRINTER PRINTING MULTIPLE PAGES ON ONE PAGE This function can be used to reduce the print image and print multiple pages on a single sheet of paper. This is convenient when you want to print multiple images such as photos on a single sheet of paper, and when you want to conserve paper.
Page 298 PRINTER Windows (1) Configure the settings on the [Main] tab. (2) Select the number of pages per sheet. (3) If you wish to print borderlines, click the [Border] checkbox so that a checkmark appears. (4) Select the order of the pages. (2) (3) Normal printing only on the first page (PCL6 only) (1) Click the [Special Modes] tab.
Page 299 PRINTER Macintosh (1) Select [Layout]. (2) Select the number of pages per sheet. (3) Select the order of the pages. (4) If you wish to print borderlines, select the desired type of borderline. 3-32 Contents...
Page 300: Stapling Output/Punching Holes In Output
PRINTER STAPLING OUTPUT/PUNCHING HOLES IN OUTPUT (DX-2500N only) Staple function The staple function can be used to staple output. This function saves considerable time when preparing handouts for a meeting or other stapled materials. The staple function can also be used in combination with two-sided printing to create materials with a more sophisticated appearance.
Page 301 PRINTER • To use the staple function, a finisher is required. • To use the punch function, a punch module must be installed on the finisher. • The number of holes that can be punched and the spacing between the holes varies depending on the installed punch module. •...
Page 302: Convenient Printing Functions
PRINTER CONVENIENT PRINTING FUNCTIONS This section explains convenient functions for specific printing objectives. • CONVENIENT FUNCTIONS FOR CREATING • FUNCTIONS THAT COMBINE TEXT AND IMAGES PAMPHLETS AND POSTERS (page 3-47) • FUNCTIONS TO ADJUST THE SIZE AND • PRINT FUNCTIONS FOR SPECIAL PURPOSES ORIENTATION OF THE IMAGE (page 3-39) (page 3-50)
Page 303 PRINTER Macintosh (1) Select [Printer Features]. (2) Select the "Binding Edge". (3) Select [Tiled Pamphlet] or [2-Up Pamphlet]. 3-36 Contents...
Page 304: Increasing The Margin (Margin Shift)
PRINTER INCREASING THE MARGIN (Margin Shift) This function is used to shift the print image to increase the margin at the left, right, or top of the paper. This is convenient when you wish to staple or punch the output but the binding area overlaps the text.
Page 305: Creating A Large Poster (Poster Printing)
PRINTER CREATING A LARGE POSTER (Poster Printing) (This function is only available in Windows.) One page of print data can be enlarged and printed using multiple sheets of paper (4 sheets (2 x 2), 9 sheets (3 x 3) or 16 sheets (4 x 4)). The sheets can then be attached together to create a large poster.
Page 306: Functions To Adjust The Size And Orientation Of The Image
PRINTER FUNCTIONS TO ADJUST THE SIZE AND ORIENTATION OF THE IMAGE ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees) This feature rotates the image 180 degrees so that it can be printed correctly on paper that can only be loaded in one orientation (such as envelopes or paper with punch ABCD holes).
Page 307: Enlarging/Reducing The Print Image (Zoom/Xy-Zoom)
PRINTER ENLARGING/REDUCING THE PRINT IMAGE (Zoom/XY-Zoom) This function is used to enlarge or reduce the image to a selected percentage. This allows you to enlarge a small image or add margins to the paper by slightly reducing an image. When using the PS printer driver (Windows), you can set the width and length percentages separately to change the proportions of the image.
Page 308: Adjusting Line Widths When Printing (Line Width Settings)
(Only for black and white printing.) Windows (This function can be used when the PCL6 and Sharp Advanced Printing Language-c printer driver is used.) (1) Click the [Advanced] tab. (2) Adjust the line width.
Page 309: Reversing The Image (Mirror Image)
PRINTER REVERSING THE IMAGE (Mirror Image) (This function is only available in Windows.) The image can be reversed to create a mirror image. This function can be used to conveniently print a design for a woodblock print or other printing medium. Windows (This function can be used when the PS printer driver is used.) (1) Click the [Advanced] tab.
Page 310: Colour Mode Adjustment Function
PRINTER COLOUR MODE ADJUSTMENT FUNCTION ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Colour Adjustment) The brightness and contrast can be adjusted in the print settings when printing a photo or other image. These settings can be used for simple corrections when you do not have image editing software installed on your computer. Windows (1) Click the [Color] tab.
Page 311: Printing Faint Text And Lines In Black (Text To Black/Vector To Black)
PRINTER PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black) (This function is only available in Windows.) When printing a colour image in greyscale, colour text ABCD ABCD and lines that are faint can be printed in black. (Raster data such as bitmap images cannot be adjusted.) This allows you to bring out colour text and lines that are faint and difficult to see when printed in greyscale.
Page 312: Selecting Colour Settings To Match The Image Type (Advanced Colour)
PRINTER SELECTING COLOUR SETTINGS TO MATCH THE IMAGE TYPE (Advanced Colour) Preset colour settings are available in the machine's printer driver for various uses. These enable printing using the most suitable colour settings for the colour image type. Advanced colour settings can also be configured to match the objective of the colour image, such as colour management settings and the screening setting for adjustment of colour tone expression.
Page 313 PRINTER Macintosh (1) Select [Color]. (2) Select colour print settings. To use the Mac OS Color Management function, select the [ColorSync] checkbox . When this is done, "Image Type" cannot be selected. (3) Select the colour image type. An image type to match the data to be printed can be selected from the pull-down menu.
Page 314: Functions That Combine Text And Images
PRINTER FUNCTIONS THAT COMBINE TEXT AND IMAGES ADDING A WATERMARK TO PRINTED PAGES (Watermark) Faint shadow-like text can be added to the background of the printed image as a watermark. The size, colour, density, and angle of the watermark text can be adjusted.
Page 315: Printing An Image Over The Print Data (Image Stamp)
PRINTER PRINTING AN IMAGE OVER THE PRINT DATA (Image Stamp) (This function is only available in Windows.) A bitmap or JPEG image stored on your computer can be printed over the print data. The size, position, and angle of the image can be adjusted. This feature can be used to "stamp"...
Page 316: Creating Overlays For Print Data (Overlays)
PRINTER CREATING OVERLAYS FOR PRINT DATA (Overlays) (This function is only available in Windows.) (The productivity kit is required.) XXXX XXXX The print data can be printed in a previously created overlay. By creating table rulings or a decorative frame 1 100 1 100 XXXX...
Page 317: Print Functions For Special Purposes
PRINTER PRINT FUNCTIONS FOR SPECIAL PURPOSES PRINTING SPECIFIED PAGES ON DIFFERENT PAPER (Different Paper) • Using this function in a Windows environment The front and back cover and specified pages of a document can be printed on paper that is different from the other pages.
Page 318 PRINTER Macintosh (1) Select [Printer Features]. (2) Select [Different Paper]. SCxxxxxx (3) Select cover insertion settings. Select the print setting, paper tray, and paper type for the cover page and last page. 3-51 Contents...
Page 319: Adding Inserts When Printing On Transparency Film (Transparency Inserts)
PRINTER ADDING INSERTS WHEN PRINTING ON TRANSPARENCY FILM (Transparency Inserts) When printing on transparency film, this function helps prevent the sheets of transparency film from sticking together by inserting a sheet of paper between each sheet of film. It is also possible to print the same content on each inserted sheet of paper as is printed on the corresponding sheet of transparency film.
Page 320: Printing A Carbon Copy (Carbon Copy)
PRINTER PRINTING A CARBON COPY (Carbon Copy) (This function is only available in Windows.) This function is used to print an additional copy of the print image on paper that is the same size but from a different paper tray. For example, if carbon copy print is selected when standard paper is loaded in tray 1 and coloured paper is loaded in tray 2, a print result similar to a carbon copy...
Page 321: Printing Text On Tabs Of Tab Paper (Tab Paper Print/Tab Paper Settings)
PRINTER PRINTING TEXT ON TABS OF TAB PAPER (Tab Paper Print/Tab Paper Settings) (This function is only available in Windows.) This function is used to print text on the tabs of tab paper. Tab Paper Print (PCL6 only) You can print on each sheet of tab paper that you insert in the desired page position.
Page 322 PRINTER Windows Tab Paper Print (PCL6 only) Open the data that you wish to print on the tab paper and then select the settings. (1) Click the [Special Modes] tab. (2) Select [Tab Paper Print] and click the [Settings] button. (3) Select the tab position settings.
Page 323 PRINTER Tab Paper Settings (PCL6, PS only) When you have finished preparing the data to be printed on the tabs in the software application, select the following settings: (1) Click the [Advanced] tab. (2) Click the [Tab Paper Settings] button. (3) Select the tab paper settings.
Page 324: Two-Sided Printing With Specific Pages Printed On The Front Side (Chapter Inserts)
PRINTER TWO-SIDED PRINTING WITH SPECIFIC PAGES PRINTED ON THE FRONT SIDE (Chapter Inserts) (This function is only available in Windows.) You can have specific pages printed on the front side of Example: the paper. When pages 4 and 8 are specified as page settings. When a page (such as the first page of a chapter) is specified as a front side page, the page will be printed on the front side of the paper even if would normally be...
Page 325: Convenient Printer Functions
PRINTER CONVENIENT PRINTER FUNCTIONS USING TWO MACHINES TO PRINT A LARGE PRINT JOB (Tandem Print) (The productivity kit is required.) Example: Printing 4 sets of copies Two machines are required to use this function. Tandem Print allows you to divide a large print job between two machines connected to your network.
Page 326: Saving And Using Print Files (Retention/Document Filing)
PRINTER SAVING AND USING PRINT FILES (Retention/Document Filing) (The productivity kit is required.) This function is used to store a print job as a file on the machine's hard drive, allowing the job to be printed from the operation panel when needed. The location for storing a file can be selected to prevent the file from being mixed together with files of other users.
Page 327 PRINTER Windows (1) Click the [Job Handling] tab. (2) Select the retention setting. Click the [Retention] checkbox . Select the retention method in "Retention Settings". To enter a password (5 to 8 digit number), click the [Password] checkbox (3) Select document filing settings. Select the folder for storing the file in "Document Filing Settings".
Page 328 PRINTER Macintosh (1) Select [Job Handling]. (2) Select the retention setting. Click the [Retention] checkbox . Select the retention method in "Retention Settings". To simplify operation the next time the same password is set, click the (lock) button after entering the password (5 to 8 digit number). (3) Select document filing settings.
Page 329: Printing Without The Printer Driver
PRINTER PRINTING WITHOUT THE PRINTER DRIVER When you do not have the printer driver installed on your computer, or when the software application used to open a file that you wish to print is not available, you can print directly to the machine without using the printer driver. The file types (and corresponding extensions) that can be printed directly are shown below.
Page 330: Directly Printing A File On An Ftp Server
PRINTER DIRECTLY PRINTING A FILE ON AN FTP SERVER When an FTP server is configured in the machine's Web pages, you can specify and print a file on the FTP server from the operation panel of the machine. This saves you the trouble of downloading the file and printing it from a computer. For the procedure for accessing the Web pages, see the Start Guide.
Page 331: Directly Printing A File In Usb Memory
PRINTER Print the selected file. Cancel Print File-01.tiff (1) Select print conditions. If you selected a file (PCL, PS) in step 3 that includes print Paper Select Number of Prints settings, the settings will be applied. Auto B/W Print (1 999) (2) Touch the [Print] key.
Page 332 PRINTER Access the USB memory device. (1) Touch the [DOCUMENT FILING] key. DOCUMENT COPY IMAGE SEND FILING (2) Touch the [Ex Data Access] tab. Scan to HDD HDD Status File Retrieve Ex Data Access (3) Touch the [USB Memory] key. External Data Access USB Memory Network Folder...
Page 333: Directly Printing A File In Anetwork Folder
PRINTER Remove the USB memory device from the machine. When you select a PDF file that has a password, you must enter the password in the job status screen to begin printing. PRINTING AN ENCRYPTED PDF FILE (page 3-74) DIRECTLY PRINTING A FILE IN A NETWORK FOLDER (The productivity kit is required.) You can use the machine's operation panel to select and print a file on a server or in a shared folder of an individual's computer on the same network as the machine.
Page 334 PRINTER Access the network folder. Select workgroup. Search (1) Touch the key of the workgroup that you Workgroup wish to access. Workgroup Name Work 1 Work 2 Work 3 Work 4 Work 5 Work 6 (2) Touch the key of the server or computer Select server.
Page 335 PRINTER Touch the key of the file that you wish to \\Server 1\User 1 print. File or Folder Name File-01.tiff • The icon appears to the left of keys of files that can be Folder01 printed. File-02.tiff • The icon is displayed to the left of keys of folders in the File-03.tiff network folder.
Page 336: Directly Printing From A Computer
PRINTER DIRECTLY PRINTING FROM A COMPUTER Settings can be configured in the Web pages of the machine to enable direct printing from a computer without using the printer driver. For the procedure for accessing the Web pages, see the Start Guide. SUBMIT PRINT JOB You can specify a file to be printed directly without using the printer driver.
Page 337: E-Mail Print
PRINTER E-MAIL PRINT An e-mail account can be configured in the machine to have the machine periodically check your mail server and automatically print received e-mail attachments without using the printer driver. • Configuring settings To use E-mail Print, you must first configure an e-mail account in the machine. To configure an account, click [Application Settings] and then [E-mail Print Settings] in the Web page menu.
Page 338: Checking The Print Status
PRINTER CHECKING THE PRINT STATUS JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the touch panel is touched. The job status screen shows the status of jobs by mode. When the [JOB STATUS] key is touched, the job status screen of the mode that was being used before the key was pressed appears.
Page 339: Spool Screen/Job Queue Screen/Completed Job Screen
PRINTER SPOOL SCREEN/JOB QUEUE SCREEN/COMPLETED JOB SCREEN The job status screen consists of the job queue screen that shows copy and print jobs waiting to be printed and the job currently in progress, the completed job screen that shows jobs that have been completed, and the spool screen that shows print jobs that have been spooled and encrypted PDF jobs that are waiting for a password to be entered.
Page 340 PRINTER Job key display Each job key shows the position of the job in the job queue and the current status of the job. Computer01 002/000 Waiting Indicates the number (position) of the job in the job Status queue. Shows the job status. When the job currently being printed is finished, the job Message Status...
Page 341: Printing An Encrypted Pdf File
PRINTER PRINTING AN ENCRYPTED PDF FILE Encrypted PDF is used to protect a PDF file by requiring the entry of a password to print or edit the file. To directly print an encrypted PDF file on an FTP server or in a USB memory device, etc. connected to the machine, follow the steps below to enter the password and begin printing.
Page 342: Giving A Print Job Priority/Cancelling A Print Job
PRINTER GIVING A PRINT JOB PRIORITY/CANCELLING A PRINT JOB GIVING A PRINT JOB PRIORITY When the machine is busy copying or printing a received fax or other job, you can give priority to a print job that is waiting to be printed and print it ahead of the other jobs. Press the [JOB STATUS] key ( Give the desired job priority.
Page 343: Cancelling A Print Job
PRINTER CANCELLING A PRINT JOB A job being printed, a job waiting to be printed, or a spooled job can be cancelled. Press the [JOB STATUS] key ( Cancel the job. (1) Touch the [Print Job] tab. Print Job Scan to Fax Job Internet Fax Job Queue...
Page 344: Changing To Another Paper Size And Printing When Paper Runs Out
PRINTER CHANGING TO ANOTHER PAPER SIZE AND PRINTING WHEN PAPER RUNS OUT If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched and paper is loaded in the machine.
Page 345: Appendix
PRINTER APPENDIX PRINTER DRIVER SPECIFICATION LIST Available functions and output results may vary depending on the type of printer driver being used. Sharp Advanced Windows Macintosh Function Printing PCL6 Language-c Frequently Copies 1-999 1-999 1-999 1-999 1-999 used Orientation functions...
Page 346 PRINTER Sharp Advanced Windows Macintosh Function Printing PCL6 Language-c Special Different Paper Yes* functions Transparency Inserts Carbon Copy Tab Printing Yes* Chapter Inserts Page Interleave Layout Print Tandem Print* Retention* Document Filing Colour mode Colour Adjustment adjusting Text To Black/...
Page 347: Printer Specifications
Printing resolution 600x600 dpi, 9600 equivalent x 600dpi Printer driver type PCL6, PostScript 3 compatible* , Sharp Advanced Printing Language-c Supported protocols TCP/IP, IPX/SPX, NetBEUI, EtherTalk* Supported client PC See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Page 348 CHAPTER 4 FACSIMILE This chapter provides detailed explanations of the procedures for using the fax function. To use the fax function, the facsimile expansion kit must be installed. BASIC TRANSMISSION METHODS BEFORE USING THE MACHINE AS A FAX TRANSMISSION METHODS ....4-25 PREPARATIONS FOR FAX .
Page 349 FACSIMILE ADDING YOUR SENDER INFORMATION TO FAX RECEPTION FAXES (Own number sending) ....4-95 • TEMPORARILY CHANGING THE SENDER RECEIVING FAXES ......4-58 INFORMATION (Own Name Select) .
Page 350 FACSIMILE USING AN EXTENSION PHONE CONNECTING AND USING AN EXISTING PHONE (Extension Phone Connection) ..4-121 • RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION PHONE (Remote Reception) ....4-122 •...
Page 351: Before Using The Machine As Afax
FACSIMILE BEFORE USING THE MACHINE AS A This section provides information that you should know before using the machine as a fax machine. PREPARATIONS FOR FAX To use the machine as a fax, the telephone line must be connected and the type of line set. CONNECTION TO THE TELEPHONE LINE Be sure to use the provided telephone line cord "LINE"...
Page 352: Make Sure The Main Power Switch Is In The "On" Position
FACSIMILE MAKE SURE THE MAIN POWER SWITCH IS IN THE "ON" POSITION When the main power indicator on the operation panel is lit, the main power is on. If the main power indicator light is not lit, the main power is "off". Switch the main power switch to the "on" position and press the [POWER] key ( ) on the operation panel.
Page 353: Checking The Date And Time
FACSIMILE CHECKING THE DATE AND TIME Verify that the correct date and time are set in the machine. The date and time are set in the system settings of the machine. When the [SYSTEM SETTINGS] key is touched, the system settings menu screen appears on the touch panel. Select [Default Settings], [Clock], and [Clock Adjust], and set the year, month, day, hour, and minute.
Page 354: Base Screen Of Fax Mode
FACSIMILE BASE SCREEN OF FAX MODE To use the fax function, select settings and operations in the base screen of fax mode. To display the base screen of fax mode, touch the [IMAGE SEND] key and then touch the [Fax] tab. DOCUMENT COPY IMAGE SEND...
Page 355 FACSIMILE BASE SCREEN OF FAX MODE This screen is used to select settings and operations in fax mode. DOCUMENT COPY IMAGE SEND FILING Ready to send. (10) Speaker Resend Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Scan: Auto Send:...
Page 356 FACSIMILE (15) (16) This shows the currently selected fax reception mode and the amount of free memory remaining. When "Hold Setting for Received Data Print" or "Received Data Image Check Setting" is enabled in the RECEIVING FAXES (page 4-58) system settings (administrator), this will appear when a fax is received.
Page 357: Address Book Screen
FACSIMILE ADDRESS BOOK SCREEN This screen is used to select a destination from the list of stored destinations. (10) (11) CCC CCC 0123456789 Condition (12) Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG...
Page 358: Changing The Display Of One-Touch Keys In The Address Book Screen
FACSIMILE When using the network scanner function or the Internet fax function, a different icon will appear in the one-touch key display if a non-fax destination (address) is stored. RETRIEVING A FAX NUMBER FROM THE ADDRESS BOOK (page 4-17) • System Settings: Address Book (page 7-16) This is used to store fax numbers in one-touch keys.
Page 359 FACSIMILE Index display Indexes make it easy to search for a destination (one-touch key). The destinations are displayed separately using alphabetical search characters and index numbers. To display a stored destination, touch the appropriate index tab. It is convenient to store frequently used destinations in the [Freq.] index. Specify that a destination be displayed in the [Freq.] index when you store the destination.
Page 360: Fax Transmission Sequence
FACSIMILE FAX TRANSMISSION SEQUENCE This section explains the basic procedure for sending a fax. Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. Enter the destination fax number •...
Page 361 FACSIMILE Select image settings. Select settings for the original to be faxed. Scan Internet Fax USB Mem. Scan PC Scan • [Original] key: Use this key to select the original size, the Address Book Original Auto Auto original send size, and 2-sided original Scan: Send: scanning.
Page 362 FACSIMILE Begin transmission Scan the original and send the fax. If the original is placed on the document glass, follow these steps to start scanning and transmission: When sending a fax normally (memory transmission) (1) Press the [BLACK & WHITE START] key. (2) When scanning is finished, replace the original with the next original.
Page 363: Entering Destinations
FACSIMILE ENTERING DESTINATIONS This section explains how to enter destination fax numbers. Destination fax numbers can be entered using the numeric keys, or by retrieving a previously stored fax number using the address book or a search number. ENTERING A FAX NUMBER WITH THE NUMERIC KEYS Enter the destination fax number with the numeric keys.
Page 364: Retrieving A Fax Number From The Address Book
FACSIMILE RETRIEVING A FAX NUMBER FROM THE ADDRESS BOOK The address book screen shows stored destinations as one-touch keys. A destination fax number is retrieved by simply touching the one-touch key of that destination. This is called "one-touch dialling". It is also possible to store multiple fax numbers in a one-touch key, allowing you to retrieve all the numbers by simply touching the key.
Page 365: Retrieving A Stored Destination
FACSIMILE RETRIEVING A STORED DESTINATION A destination fax number is retrieved by simply touching the one-touch key of that destination. Touch the [Address Book] key. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Auto Auto Scan: Send: Direct TX Exposure Auto...
Page 366: Checking And Deleting Entered Destinations
FACSIMILE CHECKING AND DELETING ENTERED DESTINATIONS When multiple destinations have been entered, you can display and check the destinations. You can also delete a destination (cancel selection of the destination). Touch the [Address Review] key. Condition Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD...
Page 367: Using A Search Number To Retrievea Destination
FACSIMILE USING A SEARCH NUMBER TO RETRIEVE A DESTINATION A destination stored in the address book can be retrieved using the key. This can be done in the base screen of any of the modes or in the address book screen. Touch the key.
Page 368: Retrieving A Destination From Aglobal Address Book
FACSIMILE RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK If an LDAP server is stored in the Web pages, you can look up a destination fax number in a global address book. Open the global address search screen. (1) Touch the [Address Book] key in the base Condition screen.
Page 369 FACSIMILE Select the destination. (1) Touch the key of the desired destination. Condition If no names are found that match the search letters, a Settings Detail message will appear. Touch the [OK] key to close the Address Review XXX AAA 0123456789 message and touch the [Search Again] key to search Search Again...
Page 370: Using The Resend Function
FACSIMILE USING THE RESEND FUNCTION The destinations of the most recent 8 transmissions by fax, Scan to E-mail, and/or Internet fax are stored. One of these can be selected to resend to that destination. Touch the [Resend] key. Ready to send. Speaker Resend Scan...
Page 371: Chain Dialling
FACSIMILE CHAIN DIALLING Number sequences entered with the numeric keys and/or one-touch keys can be linked together with pauses and dialled as a single number. Use chain dialling to dial a long number (such as an international number) when the country code and/or area code are stored separately in one-touch keys.
Page 372: Basic Transmission Methods
FACSIMILE BASIC TRANSMISSION METHODS This section explains the basic procedures for sending a fax. TRANSMISSION METHODS The methods that can be used to send a fax from the machine are explained below. Select the method that best suits your needs. To fax a large number of sheet originals, use the automatic document feeder.
Page 373 FACSIMILE To fax thick originals or pages of a book, use the document glass. USING THE DOCUMENT GLASS FOR TRANSMISSION (page 4-34) Transmission When the document glass is being used for a transmission, Quick Online transmission will not operate. If you wish to send a fax ahead of other previously reserved fax transmissions, use direct transmission mode.
Page 374: Placement Orientation Of The Original
FACSIMILE PLACEMENT ORIENTATION OF THE ORIGINAL When an A4 (8-1/2" x 11") original is placed in vertical orientation ( ), the image is automatically rotated 90 degrees and transmitted in horizontal orientation ( ) (Rotation Sending). If the original is placed in horizontal orientation ( ), it is transmitted in that orientation ( ) without being rotated.
Page 375: Transmittable Original Sizes
FACSIMILE TRANSMITTABLE ORIGINAL SIZES The following original sizes can be transmitted. Minimum original size Maximum original size Using the automatic document 131 mm (height) x 140 mm (width) 297 mm (height) x 1000 mm* (width) feeder (5-1/8" (height) x 5-1/2" (width)) (11-5/8"...
Page 376: When The Line Is Busy
FACSIMILE WHEN THE LINE IS BUSY If the line is busy when you send a fax, transmission will be re-attempted automatically after a preset interval. This function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the transmission will be cancelled.
Page 377: Fax Destination Confirmation Mode
FACSIMILE FAX DESTINATION CONFIRMATION MODE The fax destination confirmation mode displays a destination confirmation message when a fax transmission is performed to prevent accidental transmission to the wrong destination. This function is enabled in the system settings (administrator). When the function is enabled, a message will appear to confirm the destination when the [BLACK & WHITE START] key is pressed to begin fax transmission.
Page 378: Using The Automatic Document Feeder For Transmission
FACSIMILE USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION This section explains how to use the automatic document feeder to send a fax. Place the originals face up in the document feeder tray with the edges Indicator line aligned evenly. Insert the originals all the way into the document feeder tray. Multiple originals can be placed in the document feeder tray.
Page 379: Using The Automatic Document Feeder To Send A Fax In Direct Transmission Mode
FACSIMILE USING THE AUTOMATIC DOCUMENT FEEDER TO SEND A FAX IN DIRECT TRANSMISSION MODE Place the originals face up in the document feeder tray with the edges Indicator line aligned evenly. Insert the originals all the way into the document feeder tray. Multiple originals can be placed in the document feeder tray.
Page 380 FACSIMILE • The following functions cannot be used with direct transmission: Program, Timer Transmission, 2in1, Card Shot, Job Build, Polling Memory, Original Count, File, Quick File, Memory Box, 2-Sided Original Scanning, Global Address Search • Resending will not take place when a direct transmission is not successful due to a communication error or other reason. •...
Page 381: Using The Document Glass For Transmission
FACSIMILE USING THE DOCUMENT GLASS FOR TRANSMISSION To fax a thick original or other original that cannot be fed through the automatic document feeder, open the automatic document feeder and place the original on the document glass. Open the automatic document feeder, Original size place the original face down on the detector...
Page 382 FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. If you have another page to scan, change pages and then press the [BLACK & WHITE START] key. Repeat until all originals have been scanned. If no action is taken for one minute, scanning automatically ends and the transmission is reserved. Touch the [Read-End] key.
Page 383: Using The Document Glass To Send A Fax In Direct Transmission Mode
FACSIMILE USING THE DOCUMENT GLASS TO SEND A FAX IN DIRECT TRANSMISSION MODE When sending a fax from the document glass in direct transmission mode, only one page can be transmitted. Open the automatic document feeder, Original size place the original face down on the detector document glass, and then gently close the automatic document feeder.
Page 384 FACSIMILE Touch the [Direct TX] key. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Auto Auto Scan: Send: Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Auto Reception Preview Fax Memory:100% Press the [BLACK &...
Page 385: Transmission Using The Speaker
FACSIMILE TRANSMISSION USING THE SPEAKER When the speaker is used to dial, the fax is sent after the number is dialled and the connection is established. If a person answers, you will be able to hear his or her voice, but you will not be able to speak. Place the original.
Page 386: Sending The Same Fax To Multiple Destinations (Broadcast Transmission)
FACSIMILE SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast Transmission) This function is convenient when you need to send the same fax to multiple destinations, such as sending a report to branch offices in different regions. A single broadcast operation allows transmissions to a maximum of 500 destinations. Transmission Originals It is convenient to store destinations to which you frequently send faxes by broadcast transmission in group keys.
Page 387 FACSIMILE Enter the destination fax number. (1) Touch the [Address Book] key in the base CCC CCC Pause Next Address 0123456789 screen. Condition (2) Touch the one-touch key of the desired Settings AAA AAA BBB BBB Address Review destination. CCC CCC DDD DDD Address Entry EEE EEE...
Page 388 FACSIMILE Check the destinations and then touch Address Review the [OK] key. CCC CCC KKK KKK LLL LLL MMM MMM NNN NNN OOO OOO PPP PPP QQQ QQQ RRR RRR SSS SSS UUU UUU TTT TTT To cancel a specified destination... Touch the key of the destination that you wish to cancel.
Page 389 FACSIMILE Resending to unsuccessful broadcast transmission destinations The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the destinations failed, resend the fax to those destinations. Press the [JOB STATUS] key ( Touch the [Complete] key.
Page 390 FACSIMILE Resend to unsuccessful destinations. Detail Broadcast0001 (1) Touch the [Failed] tab. Retry Address Start Time Status (2) Touch the [Retry] key. DDD DDD 10:01 04/01 NG00000 10:10 04/01 NG00000 EEE EEE File Failed All Destinations (1) (2) • The procedure after the [Retry] key is touched varies depending on whether or not the document filing function was used.
Page 391: Sending A Fax Directly From Acomputer (Pc-Fax)
FACSIMILE SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax) A document in a computer can be transmitted via the machine as a fax. Faxes are sent using the PC-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver on your computer and then select the Print command in the software application.
Page 392: Image Settings
FACSIMILE IMAGE SETTINGS Settings for scanning the original are selected in the base screen of each mode. The current state of each setting appears to the right of the key used to select the setting. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original...
Page 393: Automatically Scanning Both Sides Of An Original (2-Sided Original)
FACSIMILE AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder will automatically scan both sides of the document. Transmission 2-sided original Front and back are sent as two pages Touch the [Original] key. IMAGE SETTINGS (page 4-45) Specify the binding style of the 2-sided Fax/Original original (book or tablet) and the...
Page 394: Specifying The Scan Size And Send Size (Enlarge/Reduce)
FACSIMILE SPECIFYING THE SCAN SIZE AND SEND SIZE (Enlarge/Reduce) When the original is placed, its size is automatically detected and displayed in the base screen. The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size. Scan Internet Fax USB Mem.
Page 395 FACSIMILE Specifying the original scan size (by paper size) If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Touch the [Original] key.
Page 396 FACSIMILE Touch the [OK] key. Fax/Original Scan Size 100% Send Size Auto Image Orientation 2-Sided 2-Sided Tablet Booklet When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. 4-49 Contents...
Page 397 FACSIMILE Specifying the original scan size (by numerical values) When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size. The width can be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8"). Touch the [Original] key.
Page 398 FACSIMILE Touch the [OK] key. Fax/Original The specified size appears in the [Scan Size] key. Scan Size Send Size X420 Y297 Auto Image Orientation 2-Sided 2-Sided Tablet Booklet • When the scan size is specified by numerical values, the send size cannot be specified. •...
Page 399 FACSIMILE Specifying the send size of the original Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced. The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by numerical values.
Page 400 FACSIMILE Specify the orientation in which the original is placed. Fax/Original (1) Touch the appropriate [Image Orientation] Scan Size 141% Send Size key. Auto If the wrong orientation is selected here, the image may not be sent properly when using enlargement/reduction. Image Orientation (2) Touch the [OK] key.
Page 401: Changing The Exposure
FACSIMILE CHANGING THE EXPOSURE The exposure can be changed to match the darkness of the original. Refer the following tables to select appropriate settings. Exposure settings Exposure When to select Auto This setting automatically adjusts the exposure for light and dark parts of the original. Select this setting when the original consists of dark text.
Page 402: Changing The Resolution
FACSIMILE CHANGING THE RESOLUTION The resolution can be selected to match the characteristics of the original, such as text or photo, the size of the text, and the darkness of the image. Refer the following tables to select appropriate settings. Resolution settings Resolution When to select...
Page 403: Checking The Image To Be Transmitted (Preview)
FACSIMILE CHECKING THE IMAGE TO BE TRANSMITTED (Preview) (The productivity kit is required.) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
Page 404: Preview Check Screen
FACSIMILE PREVIEW CHECK SCREEN This section explains the preview check screen. Preview Sender Info Function Rev. Display Rotation Start Sending 0001 /0010 Preview image [Sender Info] key A preview of the scanned original appears. Touch to display the sender information for fax own If the image is cut off, use the scroll bars at the right and number.
Page 405: Fax Reception
FACSIMILE FAX RECEPTION This section explains the basic procedures for receiving faxes. RECEIVING FAXES When the reception mode is set to "Auto Reception", the machine will receive and print faxes automatically. The fax reception mode is displayed in the base screen. Scan Internet Fax USB Mem.
Page 406: Receiving A Fax
FACSIMILE RECEIVING A FAX When a fax is transmitted to the machine, the machine automatically receives and prints the fax. The machine rings and fax reception begins automatically. Beep A beep sounds when reception ends. • System Settings (Administrator): Speaker Settings This is used to change the volume and tone of the reception beep.
Page 407: Receiving A Fax Manually
FACSIMILE RECEIVING A FAX MANUALLY A fax can be received manually using the touch panel. While the machine rings, touch the [Speaker] key in the base screen and then touch the [Fax Manual Reception] key that appears. Telephone mode. Speaker Resend Scan Internet Fax...
Page 408: Printing A Password-Protected Fax (Hold Setting For Received Data Print)
FACSIMILE PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" can be enabled in the system settings (administrator) to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is used, a password entry screen appears in the touch panel when a fax is received.
Page 409: Checking The Image Before Printing
FACSIMILE CHECKING THE IMAGE BEFORE PRINTING (The productivity kit is required.) When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image.
Page 410: Checking The Image Before Forwarding
FACSIMILE CHECKING THE IMAGE BEFORE FORWARDING (The productivity kit is required.) When "Received Data Image Check Setting" is enabledin the system settings (administrator), you can select the received data from the list and forward it to the addresses recorded in the address book. When this function is enabled, follow the steps below to forward the received image.
Page 411 FACSIMILE Start forward Touch the [Start forward.] key. AAA AAA BBB BBB Address Review CCC CCC DDD DDD EEE EEE FFF FFF GGG GGG HHH HHH III III JJJ JJJ Freq. ABCD EFGH IJKL MNOP QRSTU VWXYZ etc. Sort Address Start forward.
Page 412: Image Check Screen
FACSIMILE IMAGE CHECK SCREEN This section explains the image check screen. Image Check Back 0123456789 04/04/2013 10:28 1 / 3 Display Rotation Print 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees. The rotation applies to all pages in the file, not just the Preview image displayed page.
Page 413: Forwarding Received Faxes
FACSIMILE FORWARDING RECEIVED FAXES (Fax Data Forward) When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another previously programmed fax machine. This function is convenient in an office or work area that has two or more telephone lines and another fax machine is connected to a different line than the machine.
Page 414: Forwarding Received Faxes To An Address (Inbound Routing Settings)
FACSIMILE FORWARDING RECEIVED FAXES TO AN ADDRESS (Inbound Routing Settings) You can have received faxes automatically forwarded to a facsimile internet fax, e-mail address, file server address, desktop address, or network folder address. This function can be used to forward received faxes to a specified address without printing them.
Page 415 FACSIMILE Enabling the inbound routing function. (1) In the Web page menu, click [Application Settings], [Inbound Routing Settings], and then [Administration Settings]. (2) Select [Enable] in "Inbound Routing" and click the [Submit] button. Users without administrator rights can be prohibited from storing, editing, and deleting forwarding tables in this screen, and from specifying which table is used.
Page 416 FACSIMILE Store a forwarding table. Follow the steps below to store a forwarding table that combines a specified sender and forwarding address. (1) Click [Inbound Routing Settings] in the Web page menu and click the [Add] button. (2) Enter a "Table Name". (3) Select the line used for reception.
Page 417 FACSIMILE Specifying forwarding tables to be used. To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables. (1) Click [Inbound Routing Settings] in the Web page menu. (2) Select [Always Forward] or [Forward on Selected Day &...
Page 418: Special Modes
FACSIMILE SPECIAL MODES This section explains special modes that can be used for fax transmission. SPECIAL MODES When the [Special Modes] key is touched in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the key to switch between the two screens.
Page 419 FACSIMILE (12) [Transaction Report] key (14) [Memory Box] key CHANGING THE PRINT SETTINGS FOR THE SENDING A FAX WHEN ANOTHER MACHINE TRANSACTION REPORT (Transaction Report) POLLS YOUR MACHINE (Polling Memory) (page (page 4-93) 4-100) (13) [Own Name Select] key (15) [Polling] key TEMPORARILY CHANGING THE SENDER CALLING A FAX MACHINE AND INITIATING INFORMATION (Own Name Select)
Page 420: Storing Fax Operations (Program)
FACSIMILE STORING FAX OPERATIONS (Program) A program is a group of transmission settings stored together. When transmission settings are stored in a program, the settings can be retrieved and used for a fax job by means of a simple operation. For example, suppose that the same A4 (8-1/2"...
Page 421 FACSIMILE Place the original. Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the program. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Program] key. SPECIAL MODES (page 4-71) Retrieve the stored program.
Page 422: Erasing Peripheral Shadows On The Image (Erase)
FACSIMILE ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.) Scanning a thick book Not using the erase...
Page 423 FACSIMILE Select the erase settings. (1) Touch the desired erase mode. Fax/Special Modes Select one of the 4 erase modes. Cancel Erase Touch the [Side Erase] key to open the following screen. Erase Edge Centre Edge+Centre Edge Erase Erase Erase Side Erase Cancel (0~20)
Page 424: Transmitting An Original As Two Separate Pages (Dual
FACSIMILE TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan) The left and right sides of an original can be transmitted as two separate pages. This function is useful when you wish to fax the left and right pages of a book or other bound document as separate pages. Example: Faxing the left and right pages of a book Book or bound document The left and right pages are sent as two pages.
Page 425 FACSIMILE Select Dual Page Scan. (1) Touch the [Special Modes] key. Fax/Special Modes SPECIAL MODES (page 4-71) Program Dual Page Erase (2) Touch the [Dual Page Scan] key so that it is Scan highlighted. Timer 2in1 Card Shot (3) Touch the [OK] key. Slow Scan Build Mode...
Page 426: Sending A Fax At A Specified Time
FACSIMILE SENDING A FAX AT A SPECIFIED TIME (Timer) (The productivity kit is required.) When this function is used, transmission takes place automatically at a specified time. The timer transmission function makes it easy to perform reserved transmissions, broadcast transmissions and other transmissions at night or other times when phone rates are low.
Page 427 FACSIMILE Set the time with the keys. (1) Specify the day. Fax/Special Modes Timer Cancel If you do not wish to specify a day, select [---]. In this case, transmission will begin when the time specified in (2) arrives. Day of the Week Time (2) Specify the time (hour, minute) Select the time in 24-hour format.
Page 428: Sending Two Pages As A Single Page
FACSIMILE SENDING TWO PAGES AS A SINGLE PAGE (2in1) Two original pages can be reduced and sent as a single page. This function is convenient when you have a large number of original pages and wish to reduce the number of pages sent. Portrait-oriented originals Transmission Landscape-oriented originals...
Page 429 FACSIMILE Select 2in1. (1) Touch the [Special Modes] key. Fax/Special Modes SPECIAL MODES (page 4-71) Program Erase Dual Page Scan (2) Touch the [2in1] key so that it is Timer highlighted. 2in1 Card Shot (3) Touch the [OK] key. Slow Scan Build Mode Original...
Page 430 FACSIMILE • Transmission is not possible at a size smaller than the original size. • This function cannot be used in direct transmission mode or when the speaker is used to dial. • The 2in1 function cannot be used when the original is other than A4, B5 or A5 (8-1/2" x 11" or 5-1/2" x 8-1/2") size. •...
Page 431: Sending Both Sides Of A Card As Asingle Page (Card Shot)
FACSIMILE SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot) This function lets you send the front and reverse sides of a card as a single page, without the need to send each side separately. Transmitted image Originals Transmission Front...
Page 432 FACSIMILE Specify the original size. (1) Enter the original size. Fax/Special Modes • Touch the X (width) numeric value display key and Cancel Card Shot enter the width. • Touch the Y (height) numeric value display key and (25~210) Fit to enter the height.
Page 433 FACSIMILE Touch the [Read-End] key. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure Read-End If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. •...
Page 434: Sending A Large Number Of Pages (Job Build)
FACSIMILE SENDING A LARGE NUMBER OF PAGES (Job Build) This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic document feeder, and transmit the pages in a single transmission. Use this function when there are more original pages than can be placed at once in the auto document feeder.
Page 435 FACSIMILE Press the [BLACK & WHITE START] key to scan the first set. To cancel scanning... Press the [STOP] key ( Insert the next set of originals and press the [BLACK & WHITE START] key. Repeat this step until all originals have been scanned. To cancel scanning...
Page 436: Faxing Thin Originals (Slow Scan Mode)
FACSIMILE FAXING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. Insert the originals face up in the document feeder tray. Adjust the document guides slowly.
Page 437 FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( • This function can only be used when a reversing single pass feeder is installed. •...
Page 438: Checking The Number Of Scanned Original Sheets Before Transmission (Original Count)
FACSIMILE CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION (Original Count) The number of scanned original sheets can be counted and displayed before transmission. Checking the number of scanned original sheets before transmission helps prevent transmission mistakes. Insert the originals face up in the document feeder tray.
Page 439 FACSIMILE When scanning ends, check the number of original sheets scanned and touch the [OK] key. XX pages of original have been scanned. (P.x) Send the scanned data? Transmission will begin. • When Job Build mode is used, the confirmation message will appear after the [Read-End] key is touched.
Page 440: Changing The Print Settings For The Transaction Report
FACSIMILE CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) A transaction report is automatically printed out to alert you when a transmission fails or when a broadcast transmission is performed. The transaction report contains a description of the transmission (date, start time, name of other party, time required, number of pages, result, etc.).
Page 441 FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
Page 442: Adding Your Sender Information To Faxes (Own Number Sending)
FACSIMILE ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending) Your sender information (date, time, sender name, sender fax number, number of pages) is automatically added to the top of each fax page you transmit. Example of the sender information printed 04/APR/2013/Thu 3:00 PM AAAAA FAX No.
Page 443: Temporarily Changing The Sender Information (Own Name Select)
FACSIMILE TEMPORARILY CHANGING THE SENDER INFORMATION (Own Name Select) You can select the sender information printed on a transmitted fax from a list of stored senders. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Own Name Select] key.
Page 444: Calling A Fax Machine And Initiating Reception (Polling)
FACSIMILE CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling) The Polling function allows the receiving machine to call the transmitting machine and initiate reception of a document in that machine. Because the receiving machine initiates reception of a document, this is called "Polling Reception". (1) Requests fax transmission.
Page 445 FACSIMILE Press the [BLACK & WHITE START] key. Your machine will call the other machine and initiate reception of the fax. • Polling reception can be used in combination with the timer function to poll at any specified time, such as at night or when you are not present (Only one timer polling reception can be set.).
Page 446: Initiating Polling Reception Manually
FACSIMILE INITIATING POLLING RECEPTION MANUALLY Use this procedure when you must start polling after listening to a recorded greeting, such as when using a fax information service. • Make sure that an original is not placed in the machine when using the polling reception function. •...
Page 447: Sending A Fax When Another Machine Polls Your Machine (Polling Memory)
FACSIMILE SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling Memory) Sending a document that has been scanned into memory when another machine polls your machine is called "Polling Memory". Prior to polling, the document that will be faxed to the other machine must be scanned into a polling memory box. This function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
Page 448: Scanning A Document Into Polling Memory
FACSIMILE SCANNING A DOCUMENT INTO POLLING MEMORY Follow these steps to scan a document into the memory box for polling transmission (Public Box). Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 449 FACSIMILE Select image settings and special Memory Box - Data Store modes. Memory Box Auto Original Auto Scan: Send: List Exposure Auto Resolution Standard Special Modes Auto Reception Fax Memory:100% • A program, timer setting, transaction report, polling and document filing cannot be selected. •...
Page 450: Checking The Document In The Public Box
FACSIMILE CHECKING THE DOCUMENT IN THE PUBLIC BOX You can check the document stored in the machine's public box for memory polling. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key.
Page 451: Deleting A Document From The Public Box
FACSIMILE DELETING A DOCUMENT FROM THE PUBLIC BOX Delete a document from the Public Box when it is no longer needed. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key.
Page 452: Performing F-Code Communication
FACSIMILE PERFORMING F-CODE COMMUNICATION This section explains how to perform F-code communication operations. F-code communication is possible with machines of other manufacturers that also support F-code communication. F-CODE COMMUNICATION Exchange of confidential documents (confidential communication), retrieval (polling) and distribution (polling memory) of information, distribution of information to multiple destinations (relay broadcast transmission) are possible with other machines that support F-code communication.
Page 453: Creating Memory Boxes In The Machine For F-Code Communication
FACSIMILE CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE COMMUNICATION Before the F-code communication function can be used, special memory boxes must be created using "F-Code Memory Box" in the system settings. A box name and F-code (sub-address and passcode) are programmed in each box, and an F-code communication function is assigned to each box.
Page 454: Confidential Communication Using F-Codes
FACSIMILE CONFIDENTIAL COMMUNICATION USING F-CODES By sending a fax to an F-code memory box (confidential) in the receiving machine (your machine or the other machine), the sender can direct the transmission specifically to the user of the box. This is convenient for sending sensitive documents that you do not wish people other than the recipient to see, or when the receiving machine is shared by multiple departments.
Page 455: F-Code Confidential Transmission
FACSIMILE F-CODE CONFIDENTIAL TRANSMISSION Follow the steps below to send a confidential fax by adding an F-code to the fax number. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Enter the destination fax number.
Page 456: Checking Faxes Received By F-Code Confidential Reception
FACSIMILE CHECKING FAXES RECEIVED BY F-CODE CONFIDENTIAL RECEPTION When an F-code confidential fax is sent to your machine, the fax is received to the memory box specified by the F-code. To check received faxes, enter the print passcode. The machine rings and the fax is received.
Page 457 FACSIMILE Enter the print passcode with the numeric keys. Enter PIN via the 10-key. As each digit is entered, "–" changes to " ". Cancel Take care to enter the correct print passcode. If you make a mistake, a message will appear and you will return to the entry screen.
Page 458: Polling Reception Using F-Codes
FACSIMILE POLLING RECEPTION USING F-CODES This function enables your machine to call another machine and initiate reception of a fax stored in an F-code memory box (polling memory) in the other machine. During the polling operation, your machine must correctly specify the F-code (sub-address and passcode) configured in the other machine or polling reception will not take place.
Page 459 FACSIMILE Enter the destination fax number. (1) Touch the [Address Book] key in the base Condition screen. Settings AAA AAA BBB BBB Address Review (2) Touch the one-touch key of the desired CCC CCC DDD DDD Address Entry destination. EEE EEE FFF FFF Global GGG GGG...
Page 460: Polling Memory Transmission Using F-Codes
FACSIMILE POLLING MEMORY TRANSMISSION USING F-CODES When your machine receives a transmission request from another machine, this function sends a fax stored in an F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code configured in your machine or transmission will not take place.
Page 461 FACSIMILE Touch the [Data Store] key. Memory Box Exit Confidential Polling Memory Reception Data Store Data Check Data Check Delete Data Touch the key of the F-code memory Back Memory Box - Data Store polling box. Public Box Box 1 Box 2 Box 3 Box 4...
Page 462 FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
Page 463: Checking The Document In The F-Code Memory Polling Box
FACSIMILE CHECKING THE DOCUMENT IN THE F-CODE MEMORY POLLING BOX You can check the document stored in the F-code memory polling box. A document in a memory box cannot be printed while the document is being transmitted. Select the special modes. (1) Touch the [Special Modes] key.
Page 464: Deleting A Document Stored For F-Code Polling Transmission
FACSIMILE DELETING A DOCUMENT STORED FOR F-CODE POLLING TRANSMISSION When a document in an F-code memory polling box is no longer needed, follow the steps below to delete it. A document in a memory box cannot be deleted while the document is being transmitted. Select the special modes.
Page 465: Relay Request Transmission Using F-Codes
FACSIMILE RELAY REQUEST TRANSMISSION USING F-CODES This function is used to send a fax to an F-code relay broadcast memory box in another machine and have that machine relay the fax to multiple end receiving machines. When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end receiving machines can help reduce phone charges.
Page 466 FACSIMILE Enter the destination fax number. (1) Touch the [Address Book] key in the base Condition screen. Settings AAA AAA BBB BBB Address Review (2) Touch the one-touch key of the desired CCC CCC DDD DDD Address Entry destination. EEE EEE FFF FFF Global GGG GGG...
Page 467: Relay Broadcast Transmission Using F-Codes
FACSIMILE RELAY BROADCAST TRANSMISSION USING F-CODES When your machine receives an F-code relay request transmission, the fax is received to an F-code relay broadcast memory box in your machine. Your machine then relays the fax to each of the end receiving machines programmed in the memory box.
Page 468: Using An Extension Phone
FACSIMILE USING AN EXTENSION PHONE This section explains how to use an extension phone to make voice calls and receive a fax after talking with the other party. CONNECTING AND USING AN EXISTING PHONE (Extension Phone Connection) You can connect an existing extension phone to the machine. The phone can be used for voice calls and to start fax reception on the machine.
Page 469: Receiving A Fax After Answeringa Call On The Extension Phone (Remote Reception)
FACSIMILE RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION PHONE (Remote Reception) Follow the steps below if you need to start fax reception after answering a call and speaking on the extension phone. If you are on a pulse-dial (rotary) line, set the extension phone to issue tone signals. When you hear ringing, answer the call on the extension phone.
Page 470: Checking The Status Of Fax Jobs
FACSIMILE CHECKING THE STATUS OF FAX JOBS This section explains how to check the status of reserved transmission jobs and received faxes. JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the touch panel is touched. The job status screen shows the status of jobs by mode.
Page 471: Job Queue Screen And Completed Job Screen
FACSIMILE JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of two screens: the job queue screen, which shows reserved jobs and the job currently in progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key ((2) below).
Page 472 FACSIMILE Job key display The following information is shown in the job queue keys and completed job keys that appear in the job status screen. AAA AAA 10:22 04/01 000/004 Waiting Indicates the number (position) of the job in the job Time reserved / Time started queue.
Page 473 FACSIMILE • Completed job Message Status "Send OK" Transmission completed. "In Memory" Reception completed but the fax has not been printed. "Received" Printed received fax data. "Forward OK" The received fax has been forwarded. "Stopped" The job was stopped. "Delete" Deleted received data in the image check screen.
Page 474: Operation When A Job In The Job Queue Is Completed
FACSIMILE OPERATION WHEN A JOB IN THE JOB QUEUE IS COMPLETED When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the status column. Received faxes, timer transmission jobs, retry jobs, and forwarding jobs are handled in the job status screen as explained below.
Page 475: Checking A Reserved Job Or The Job In Progress
FACSIMILE CHECKING A RESERVED JOB OR THE JOB IN PROGRESS The detailed contents of a broadcast transmission or serial polling job can be displayed. Select (touch) the key of the job that you wish to check and touch the [Detail] key. The job details screen will appear (see below). Detail Broadcast0001 Progress:...
Page 476: Checking Completed Jobs
FACSIMILE CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed broadcast transmission jobs, received fax forwarding jobs, serial polling jobs, and jobs that used document filing. Touch the key of the desired job in the completed jobs screen and touch the [Detail] key. The job detail screen (see below) will appear.
Page 477: Cancelling A Fax In Progress Or Areserved Fax
FACSIMILE CANCELLING A FAX IN PROGRESS OR A RESERVED FAX Follow the steps below to cancel a fax transmission that is in progress or a reserved fax job. Press the [JOB STATUS] key ( Select the fax job that you wish to Print Job Scan to Fax Job...
Page 478: Giving Priority To A Reserved Fax
FACSIMILE GIVING PRIORITY TO A RESERVED FAX When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If you need to give priority to a job and send it ahead of the other jobs, follow the steps below. Press the [JOB STATUS] key ( Select the fax job to which you wish to Print Job...
Page 479: Checking The Activity Log (Image Sending Activity Report)
FACSIMILE CHECKING THE ACTIVITY LOG (Image Sending Activity Report) IMAGE SENDING ACTIVITY REPORT You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 200 transactions are included in the report.
Page 480: Information Appearing In The Result Column
FACSIMILE INFORMATION APPEARING IN THE RESULT COLUMN Error types and other information are printed in the result column of transaction and activity reports. When a transaction report or activity report is printed, check the result of the transaction in the result column and take action as needed. Examples of messages that are printed in the result column Message Explanation...
Page 481: Facsimile Specifications
FACSIMILE FACSIMILE SPECIFICATIONS Model MX-FX11 Applicable telephone line Public switched telephone network, PBX Scanning resolution 8 x 3.85 lines/mm (Standard), 8 x 7.7 lines/mm (Fine, Fine-Halftone), 8 x 15.4 lines/mm (Super Fine, Super Fine - Halftone), 16 x 15.4 lines/mm (Ultra Fine, Ultra Fine - Halftone) (supports ITU-T standards) Transmission speed...
Page 482 CHAPTER 5 SCANNER/INTERNET FAX This chapter provides detailed explanations of the procedures for using the scanner function and the Internet fax function. USB memory mode can be used without installing a peripheral device. To use the Internet fax function, the Internet fax expansion kit is needed. (The productivity kit is required.) TRANSMITTING AN IMAGE BEFORE USING THE MACHINE AS A NETWORK SCANNER...
Page 483 SCANNER/INTERNET FAX INTERNET FAX RECEPTION FUNCTIONS SPECIAL MODES RECEIVING AN INTERNET FAX ... . . 5-108 SPECIAL MODES ......5-71 •...
Page 484: Before Using The Machine As Anetwork Scanner
SCANNER/INTERNET FAX BEFORE USING THE MACHINE AS A NETWORK SCANNER This section provides information that you should know before using the machine as a network scanner. NETWORK SCANNER FUNCTION The network scanner function of the machine can be used to scan an original, create an image file, and send the file over a network to a computer, FTP server, or other destination.
Page 485 SCANNER/INTERNET FAX USB memory mode SENDING AN IMAGE IN USB MEMORY MODE (page 5-35) USB Memory Scan The scanned file is sent to and stored in a USB memory device connected to the machine. Internet fax mode To use the Internet fax function, Internet fax expansion kit must be installed. (The productivity kit is required.) SENDING A FAX IN INTERNET FAX MODE (page 5-41) Internet fax transmission...
Page 486: Preparations For Use As A Network Scanner
SCANNER/INTERNET FAX PREPARATIONS FOR USE AS A NETWORK SCANNER MAKE SURE THE MAIN POWER SWITCH IS IN THE "ON" POSITION The main power is "on" when the main power indicator on the right side of the operation panel is lit. If the main power indicator is not lit, the main power is "off".
Page 487: Settings Required In The Web Pages
SCANNER/INTERNET FAX SETTINGS REQUIRED IN THE WEB PAGES To use scan mode and Internet fax mode, the basic network scanner settings, server settings such SMTP and DNS server settings, and sender addresses must be configured in the Web pages. • Server settings To configure server settings, click [Network Settings] and then [Services Settings] in the Web page menu.
Page 488: Storing A Destination For Scan To Desktop
SCANNER/INTERNET FAX STORING A DESTINATION FOR SCAN TO DESKTOP To store your computer in the machine as a destination for Scan to Desktop, Network Scanner Tool must be installed from the "Sharpdesk/Network Scanner Utilities" CD-ROM that accompanies the machine. To scan an image to your computer, Network Scanner Tool must be running on your computer.
Page 489: Before Sending To A Direct Smtp Address
SCANNER/INTERNET FAX BEFORE SENDING TO A DIRECT SMTP ADDRESS The machine supports Direct SMTP, which lets you directly send Internet faxes within your company without using a mail server. For the procedure for storing a Direct SMTP address in the address book, see "STORING DESTINATION ADDRESSES FOR EACH SCAN MODE IN THE ADDRESS BOOK"...
Page 490: Base Screen
SCANNER/INTERNET FAX BASE SCREEN Scan mode, USB memory mode, Internet fax mode, and PC scan mode are used by selecting operations and settings in the base screens of those modes. To display the base screen of a mode, touch the [IMAGE SEND] key in the touch panel and then touch the tab of the mode that you wish to use.
Page 491 SCANNER/INTERNET FAX Customized keys (13) [Special Modes] key The keys that appear here can be changed to show Touch this key to use a special mode. settings or functions that you prefer. SPECIAL MODES (page 5-71) Customizing displayed keys (page 5-11) (14) [Stored to] key [Preview] key* Touch to select the folder in USB memory where a file will...
Page 492 SCANNER/INTERNET FAX Customizing displayed keys Special mode keys and other keys can be displayed in the base screen. Set these keys to functions that you frequently use to access the functions with a single touch. The customized keys are configured using "Customize Key Setting" in the Web pages.
Page 493: Address Book Screen
SCANNER/INTERNET FAX ADDRESS BOOK SCREEN This screen is used to select transmission destinations. (10) (11) AAA AAA xxx@xx.xxx.com Condition (12) Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH Address Search III III...
Page 494: Changing The Display Of One-Touch Keys In The Address Book Screen
SCANNER/INTERNET FAX • Icons appear in the one-touch keys in the address book to indicate which mode is used for transmission. RETRIEVING A DESTINATION FROM THE ADDRESS BOOK (page 5-18) • For information on storing addresses in the address book, see "STORING DESTINATION ADDRESSES FOR EACH SCAN MODE IN THE ADDRESS BOOK"...
Page 495 SCANNER/INTERNET FAX Index display Indexes make it easy to search for a destination (one-touch key). The destinations are displayed separately using alphabetical search characters and index numbers. To display a stored destination, touch the appropriate index tab. It is convenient to store frequently used destinations in the [Freq.] index. Specify that a destination be displayed in the [Freq.] index when you store the destination.
Page 496: Scan Send Sequence
SCANNER/INTERNET FAX SCAN SEND SEQUENCE This section explains the basic procedure for scanning and transmission. Select settings in the order shown below to ensure smooth transmission. For the detailed procedures for selecting the settings, see the explanation of each setting in this chapter. Place the original.
Page 497 SCANNER/INTERNET FAX Special mode settings Special modes can be selected. Scan Internet Fax USB Mem. Scan PC Scan SPECIAL MODES (page 5-71) Address Book Original Scan: Auto Send: Auto Address Entry Exposure Auto Text Send Settings Resolution 200X200dpi Address Review File Format File Colour Mode...
Page 498: Original Sizes
SCANNER/INTERNET FAX ORIGINAL SIZES TRANSMITTABLE ORIGINAL SIZES The following original sizes can be transmitted Minimum original size Maximum original size Using the automatic document feeder 131 mm (height) x 140 mm (width) 297 mm (height) x 1000 mm* (width) (5-1/8" (height) x 5-1/2" (width)) (11-5/8"...
Page 499: Entering Destinations
SCANNER/INTERNET FAX ENTERING DESTINATIONS This section explains how to specify destination addresses, including selecting an address from the address book and retrieving an address by entering a search number. RETRIEVING A DESTINATION FROM THE ADDRESS BOOK The address book screen shows stored destinations as one-touch keys. The destinations are displayed in order by search number.
Page 500: Retrieving A Destination
SCANNER/INTERNET FAX RETRIEVING A DESTINATION A destination is retrieved by selecting its one-touch key. Touch the [Address Book] key. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Scan: Auto Send: Auto Address Entry Exposure Auto Text Send Settings Resolution 200X200dpi Address Review...
Page 501: Checking And Deleting The Selected Destinations
SCANNER/INTERNET FAX CHECKING AND DELETING THE SELECTED DESTINATIONS When multiple destinations have been selected, you can display and check the destinations. You can also delete a destination from the list (cancel selection of the destination). Touch the [Address Review] key. Condition Settings AAA AAA...
Page 502: Using A Search Number To Retrievea Destination
SCANNER/INTERNET FAX USING A SEARCH NUMBER TO RETRIEVE A DESTINATION A destination stored in the address book can be retrieved using the key. This can be done in the base screen of any of the modes or in the address book screen. Touch the key.
Page 503: Entering An Address Manually
SCANNER/INTERNET FAX ENTERING AN ADDRESS MANUALLY Scan to E-mail, Internet fax, Network Folder and data entry mode addresses can be manually entered. Display the address input screen. (1) Touch the [Address Book] key in the base screen. Condition Settings AAA AAA BBB BBB Before touching the [Address Entry] key in the base Address Review...
Page 504: Specifying A Network Folder
SCANNER/INTERNET FAX SPECIFYING A NETWORK FOLDER A network folder on a server or computer connected to the same network as the machine can be directly specified. Select [Network Folder] in step 2 on the previous page and follow the steps below. Touch the [Browse] key.
Page 505 SCANNER/INTERNET FAX Access the network folder. (1) Touch the key of the workgroup that you Select workgroup. Search wish to access. Workgroup Cancel Workgroup Name Work 1 Work 2 Work 3 Work 4 Work 5 Work 6 (2) Touch the key of the server or computer that you wish to access.
Page 506: Retrieving A Destination From Aglobal Address Book
SCANNER/INTERNET FAX RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK When an LDAP server is configured in the Web pages, you can look up an address in a global address book and retrieve the address for Scan to E-mail or Internet fax transmission (excluding Direct SMTP addresses). Open the global address search screen.
Page 507 SCANNER/INTERNET FAX Select the destination. (1) Touch the key of the desired destination. Condition If no names are found that match the search characters, a Settings Detail message will appear. Touch the [OK] key to close the Address Review XXX AAA AAA@xx.xxx.com message and touch the [Search Again] key to search Search Again...
Page 508: Using The Resend Function
SCANNER/INTERNET FAX USING THE RESEND FUNCTION The destinations of the most recent 8 transmissions by Scan to E-mail, Internet fax (including Direct SMTP addresses) and/or fax are stored. One of these can be selected to resend to that destination. Touch the [Resend] key. Ready to send.
Page 509: Transmitting An Image
SCANNER/INTERNET FAX TRANSMITTING AN IMAGE SENDING AN IMAGE IN SCAN MODE This section explains the basic procedure for transmission in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder). • When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 510 SCANNER/INTERNET FAX Specify the destination. (1) Touch the [Address Book] key in the base screen. Condition Settings BBB BBB AAA AAA Address Review (2) Touch the one-touch key of the desired CCC CCC DDD DDD Address Entry destination. EEE EEE FFF FFF Global GGG GGG...
Page 511 SCANNER/INTERNET FAX Specify the orientation in which the original is placed. Scan/Original To enable the original to be scanned in the correct orientation (the orientation of the top edge of the original that is shown at Scan Size 100% Send Size the top of the display), specify the orientation in which the Auto Auto...
Page 512 SCANNER/INTERNET FAX Touch the [Read-End] key. Place next original. (Pg.No.x) A beep will sound to indicate that the operation is completed. Press [Start]. Open the automatic document feeder and remove the original. When finished, press [Read-End]. Configure Read-End • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved.
Page 513: Changing The Subject, File Name, Reply-To, And Body Text
SCANNER/INTERNET FAX CHANGING THE SUBJECT, FILE NAME, REPLY-TO, AND BODY TEXT* The subject, file name, reply-to, and body text can be changed when performing a scan transmission. Preset items can be selected or text can be directly entered. * The productivity kit is required. •...
Page 514 SCANNER/INTERNET FAX To change the file name, touch the [File Send Settings Name] key. Subject Sub: Schedule coordination meeting • The file name is entered in the same way as the subject. • If you are sending to a Scan to FTP, Scan to Desktop, or File Name Scan to Network Folder destination, go to step 9.
Page 515 SCANNER/INTERNET FAX To change the body text, touch the Send Settings [Body Text] key. Subject Sub: Schedule coordination meeting When the productivity kit is not installed, Please go to step 9. File Name Material for planning meeting Reply-To AAA AAA Body Text Add 'Reply to' to Cc Enter the body text and touch the [OK]...
Page 516 SCANNER/INTERNET FAX SENDING AN IMAGE IN USB MEMORY MODE Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device. •...
Page 517 SCANNER/INTERNET FAX Switch to USB memory mode and display the image settings screen. Scan Internet Fax USB Mem. Scan PC Scan (1) Touch the [USB Mem. Scan] tab Stored to Original Scan: Auto Send: Auto If the [USB Mem. Scan] tab does not appear, touch the File Name Exposure Auto...
Page 518 SCANNER/INTERNET FAX Press the [COLOUR START] key or the [BLACK & WHITE START] key. Scanning begins. • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7.
Page 519 SCANNER/INTERNET FAX When "Sending data has been completed." appears in the touch panel, disconnect the USB memory. Do not disconnect the USB memory while "Processing data." or "Sending data." appears in the touch panel. • When transmission to USB memory is completed, "Sending data has been completed." is displayed. After a brief interval the message is cleared and the base screen of image send mode reappears.
Page 520: Specify The Folder In Which The File Will Be Stored
SCANNER/INTERNET FAX SPECIFY THE FOLDER IN WHICH THE FILE WILL BE STORED When sending a file to USB memory, a folder can be specified in USB memory. A new folder can also be created in USB memory. If a folder is not specified, the file will be stored on the first level of the USB memory. Touch the [Stored to] key.
Page 521: Entering A File Name
SCANNER/INTERNET FAX ENTERING A FILE NAME The file name can be directly entered when performing a scan transmission. • If the file name is not entered, the settings in the Web page are used. • For the procedure for entering text, see "ENTERING TEXT"...
Page 522: Sending A Fax In Internet Fax Mode
SCANNER/INTERNET FAX SENDING A FAX IN INTERNET FAX MODE The basic procedure for sending a fax in Internet fax mode is explained below. This procedure can also be used to perform direct transmission by Direct SMTP. • When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 523 SCANNER/INTERNET FAX Specify the destination. (1) Touch the [Address Book] key in the base screen. Condition Settings AAA AAA BBB BBB (2) Touch the key of the desired destination. Address Review CCC CCC DDD DDD icon appears in one-touch keys in which Internet Address Entry EEE EEE FFF FFF...
Page 524 SCANNER/INTERNET FAX Press the [BLACK & WHITE START] key. Scanning begins. • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7. To scan more pages, go to the next step. •...
Page 525: Changing The Subject, File Name, And Body Text
SCANNER/INTERNET FAX CHANGING THE SUBJECT, FILE NAME, AND BODY TEXT The subject, file name, and body text can be changed when performing an Internet fax transmission. Preset items can be selected or text can be directly entered. • If the subject and file name are not changed, the settings in the Web page are used. •...
Page 526 SCANNER/INTERNET FAX To change the file name, touch the [File Send Settings Name] key. Subject Sub: Schedule coordination meeting The file name is entered in the same way as the subject. File Name Body Text To change the body text, touch the Send Settings [Body Text] key.
Page 527 SCANNER/INTERNET FAX Touch the [OK] key. Send Settings Subject Sub: Schedule coordination meeting File Name Material for planning meeting Body Text Thank you for your continuous support. We have attached sca When storing pre-set text for the subject and file name in the Web pages, up to 80 characters can be entered. System Settings (Administrator): The Number of File Name/Subject/Body Keys Displayed Setting The setting for the number of subject keys and file name keys displayed in one screen can be changed to 6, 12, or 18.
Page 528: Sending The Same Image To Multiple Destinations (Broadcast Transmission)
SCANNER/INTERNET FAX SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission) The same scanned image can be sent to multiple scan modes, Internet fax mode, and fax mode destinations in a single operation. Up to 500 destinations can be selected in one broadcast operation. Transmission Originals If you frequently use broadcasting to send images to the same group of destinations, it is convenient to store those...
Page 529 SCANNER/INTERNET FAX Specify the destination. (1) Touch the [Address Book] key in the base Condition screen. Settings BBB BBB AAA AAA Address Review (2) Touch the one-touch key of the desired CCC CCC DDD DDD Address Entry destination. EEE EEE FFF FFF Global GGG GGG...
Page 530 SCANNER/INTERNET FAX Press the [COLOUR START] key or the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. •...
Page 531: Broadcast Transmissions That Include Internet Fax Destinations
SCANNER/INTERNET FAX BROADCAST TRANSMISSIONS THAT INCLUDE INTERNET FAX DESTINATIONS When a broadcast transmission includes both scan mode and Internet Fax mode destinations, the Internet Fax mode settings (original orientation and other various settings) are given priority. When performing this type of broadcast transmission, note the information below.
Page 532 SCANNER/INTERNET FAX Display details on the broadcast transmission. Print Job Internet Fax Scan to Fax Job (1) Touch the key of the completed broadcast Address Start Time Pages Status Broadcast0001 10:00 04/01 010/003 NG000000 Job Queue transmission. 10:05 04/01 001/001 Send OK Complete Broadcast0002 Broadcast0003...
Page 533: Sending An Internet Fax From Acomputer (Pc-I-Fax)
SCANNER/INTERNET FAX SENDING AN INTERNET FAX FROM A COMPUTER (PC-I-Fax) A file on a computer can be sent via the machine as an Internet fax (PC-I-Fax function). Internet faxes are sent using the PC-I-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver for your computer and then select the Print command in the software application.
Page 534: Image Settings
SCANNER/INTERNET FAX IMAGE SETTINGS Settings for scanning the original are selected in the base screen of each mode. The current state of each setting appears to the right of the key used to select the setting. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original...
Page 535: Automatically Scanning Both Sides Of An Original (2-Sided Original)
SCANNER/INTERNET FAX AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder can be used to automatically scan both sides of an original. Scan transmission 2-sided original Front and reverse sides are scanned Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use.
Page 536: Specifying The Original Scan Size And Send Size (Enlarge/Reduce)
SCANNER/INTERNET FAX SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce) When the original is placed, its size is automatically detected and displayed in the base screen. The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size. Scan Internet Fax USB Mem.
Page 537 SCANNER/INTERNET FAX Specifying the original scan size (by paper size) If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Select the mode and display the image settings screen.
Page 538 SCANNER/INTERNET FAX Specifying the original scan size (by numerical values) When scanning a non-standard size original such as a card, follow these steps to specify the original size. The width can be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8"). Select the mode and display the image settings screen.
Page 539 SCANNER/INTERNET FAX Touch the [OK] key. Scan/Original The specified size appears in the [Scan Size] key. Scan Size Send Size X420 Y297 Auto Image Orientation 2-Sided 2-Sided Booklet Tablet • When the scan size is specified by numerical values, the send size cannot be specified. •...
Page 540 SCANNER/INTERNET FAX Specifying the send size of the image Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced. •...
Page 541 SCANNER/INTERNET FAX Specify the orientation in which the original is placed. Scan/Original (1) Touch the appropriate [Image Orientation] Scan Size 141% Send Size key. Auto If this setting is not correct when sending an image with a changed ratio, a suitable image may not be transmitted. Image Orientation (2) Touch the [OK] key.
Page 542: Changing The Exposure And Original Image Type
SCANNER/INTERNET FAX CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE The exposure and original image type can be set appropriately for the original to enable optimum scanning. Refer the following tables to select appropriate settings. How to select the exposure Exposure When to select Auto This setting automatically adjusts the exposure for light and dark parts of the original.
Page 543 SCANNER/INTERNET FAX Select the exposure and original image type. Scan mode, USB memory mode, Data entry mode (1) Select the original image type. Touch the original image type key that matches the Scan/Exposure original image type. Auto (2) Adjust the exposure with the keys.
Page 544: Changing The Resolution
SCANNER/INTERNET FAX CHANGING THE RESOLUTION The resolution setting can be selected. Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Resolution] key. IMAGE SETTINGS (page 5-53) Select the resolution.
Page 545: Changing The File Format
For normal text originals, 200X200dpi (200X100dpi in Internet fax mode) produces an image that is sufficiently legible. For photos and illustrations, a high resolution setting (600X600dpi, etc.) will produce a sharp image. However, a high resolution setting will result in a large file, and if the file is too large, transmission may not be possible. In this event, reduce the number of pages scanned or take other measures to decrease the file size.
Page 546 SCANNER/INTERNET FAX Set the format. l Scanning in Mono2 (1) Select the file type. (2) Select the compression mode. Scan/File Format File Type Compression Mode TIFF None PDF/A MH (G3) Encrypt PDF MMR (G4) Colour/Grey Programmed (1-99) Specified Pages per File l Scanning in colour/greyscale (1) Touch the indicated key to select [Colour/Grey] mode.
Page 547 SCANNER/INTERNET FAX To change the number of pages per file, enter the number of pages and exit the Scan/File Format format settings. File Type Compression Ratio (1) Touch the [Specified Pages per File] TIFF checkbox so that a checkmark appears. PDF/A Medium JPEG...
Page 548 SCANNER/INTERNET FAX Changing the format (Internet fax mode) The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not support full mode (it only supports simple mode), follow the steps below to select [TIFF-S]. Switch to Internet fax mode and display the file format settings screen.
Page 549: Changing The Colour Mode
SCANNER/INTERNET FAX CHANGING THE COLOUR MODE This procedure is used to change the colour mode used to scan the original when the [COLOUR START] key or the [BLACK & WHITE START] key is pressed. This function cannot be used in Internet fax mode. Start key Mode Scanning method...
Page 550: Checking The Image To Be Transmitted (Preview)
SCANNER/INTERNET FAX CHECKING THE IMAGE TO BE TRANSMITTED (Preview) (The productivity kit is required.) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
Page 551: Preview Check Screen
SCANNER/INTERNET FAX PREVIEW CHECK SCREEN This section explains the preview check screen. Preview Sender Info Function Rev. Display Rotation Start Sending 0001 /0010 Preview image [Sender Info] key A preview of the scanned original appears. When Internet fax mode is selected, touch to display the If the image is cut off, use the scroll bars at the right and sender information for I-fax own address send.
Page 552: Special Modes
SCANNER/INTERNET FAX SPECIAL MODES This section explains special modes that can be used in scan send mode. SPECIAL MODES When the [Special Modes] key is touched in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the key to switch between the two screens.
Page 553 SCANNER/INTERNET FAX Internet fax mode The keys explained below can only be used in Internet fax mode. The other keys are the same as those explained in "Scan mode, USB memory mode, Data entry mode" (page 5-71). 1st screen 2nd screen Internet Fax/Special Modes Internet Fax/Special Modes Program...
Page 554: Storing Scan Operations (Programs)
SCANNER/INTERNET FAX STORING SCAN OPERATIONS (Programs) A destination, original settings, and functions can be stored in a program. When you wish to use those settings to send an image, they can be retrieved with ease. For example, suppose A4 (8-1/2" x 11") size documents are scanned into a file and sent to each branch office once a month. (1) The same documents are sent to each branch office (2) Each page of a bound document is successively transmitted (3) Smudges on the edges of the documents are erased before transmission...
Page 555 SCANNER/INTERNET FAX Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Program] key. SPECIAL MODES (page 5-71) Retrieve the stored program. (1) Touch the desired program key. Program (2) Touch the [OK] key. Program 1 Program 2 Program 3 Program 4 Program 5...
Page 556: Erasing Peripheral Shadows On The Image (Erase)
SCANNER/INTERNET FAX ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.) Scanning a thick book Not using the erase Using the erase...
Page 557 SCANNER/INTERNET FAX Select the erase settings. (1) Touch the desired erase mode. Scan/Special Modes Select one of the 4 erase modes. Cancel Erase Touch the [Side Erase] key to open the following screen. Erase Centre Edge+Centre Edge Edge Erase Erase Erase Side Erase Cancel...
Page 558: Scanning An Original As Two Separate Pages (Dual
SCANNER/INTERNET FAX SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan) The left and right sides of an original can be scanned as two separate pages. This function is useful when you wish to successively scan each page of a book or other bound document. Example: Scanning the left and right pages of a book Book or bound document The pages are scanned as two separate pages.
Page 559 SCANNER/INTERNET FAX Select the special modes. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Special Modes] key. SPECIAL MODES (page 5-71) Select Dual Page Scan. (1) Press the [Dual Page Scan] key so that it is Scan/Special Modes highlighted.
Page 560: Sending An Image At A Specified Time (Timer Transmission)
SCANNER/INTERNET FAX SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission) (The productivity kit is required.) This function lets you specify a time at which a transmission or broadcast transmission will automatically take place. Transmission begins automatically at the specified time. Set a transmission to At 20:00, the transmission take place at 20:00...
Page 561 SCANNER/INTERNET FAX Set the time with the keys. (1) Specify the day. Scan/Special Modes If you do not wish to specify a day, select [---]. In this Cancel Timer case, transmission will begin when the time specified in (2) arrives. Time Day of the Week (2) Specify the time (hour, minute)
Page 562: Whitening Faint Colours In The Image (Suppress Background)
SCANNER/INTERNET FAX WHITENING FAINT COLOURS IN THE IMAGE (Suppress Background) This feature is used to suppress light background areas. Level [+] The lightness level at which suppression takes place can be adjusted. Level [-] • This function cannot be used in Internet fax mode. •...
Page 563 SCANNER/INTERNET FAX Select the suppress background setting. (1) Adjust the background suppression level. Scan/Special Modes Touch the [+] key to suppress only faint background. Cancel Suppress Background Touch the [-] key to suppress faint to dark background. Light areas of the original may be suppressed as background. (2) Touch the [OK] key.
Page 564: Scanning Both Sides Of A Card Ontoa Single Page (Card Shot)
SCANNER/INTERNET FAX SCANNING BOTH SIDES OF A CARD ONTO A SINGLE PAGE (Card Shot) This function lets you send the front and reverse sides of a card as a single page, without the need to send each side separately. Scanned image Originals Transmission Front...
Page 565 SCANNER/INTERNET FAX Specify the original size. (1) Enter the original size. Scan/Special Modes • Touch the X (width) numeric value display key and Cancel Card Shot enter the width. • Touch the Y (height) numeric value display key and (25~210) Fit to enter the height.
Page 566 SCANNER/INTERNET FAX Touch the [Read-End] key. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure Read-End If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. The ratio cannot be specified and "Rotation Sending Setting"...
Page 567: Scanning Many Originals At Once (Job Build)
SCANNER/INTERNET FAX SCANNING MANY ORIGINALS AT ONCE (Job Build) This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic document feeder, and transmit the pages in a single transmission. Use this function when the number of originals that you wish to scan exceeds the maximum number of sheets that can be inserted in the automatic document feeder at once.
Page 568 SCANNER/INTERNET FAX Select job build mode. (1) Touch the [Job Build] key so that it is Scan/Special Modes highlighted. Program Erase Dual Page (2) Touch the [OK] key. Scan Timer Suppress Card Shot Background Slow Scan Build Mode Original File Quick File Count Press the [COLOUR START] key or the [BLACK &...
Page 569: Scanning Thin Originals (Slow Scan Mode)
SCANNER/INTERNET FAX SCANNING THIN ORIGINALS (Slow Scan Mode) Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent thin originals from misfeeding. • This function can only be used when a reversing single pass feeder is installed. •...
Page 570 SCANNER/INTERNET FAX Select slow scan mode. (1) Touch the [Slow Scan Mode] key so that it is Scan/Special Modes highlighted. Program Erase Dual Page Scan (2) Touch the [OK] key. Timer Suppress Card Shot Background Slow Scan Build Mode Original File Quick File Count...
Page 571: Checking The Number Of Scanned Original Sheets Before Transmission (Original Count)
SCANNER/INTERNET FAX CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION (Original Count) The number of scanned original sheets can be counted and displayed before transmission. Checking the number of scanned original sheets before transmission helps prevent transmission mistakes. • This function cannot be used in USB memory mode. •...
Page 572 SCANNER/INTERNET FAX Press the [COLOUR START] key or the [BLACK & WHITE START] key. Scanning begins. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared. When scanning ends, check the number of original sheets scanned and touch the [OK] key.
Page 573: Sending Two Pages As A Single Page
SCANNER/INTERNET FAX SENDING TWO PAGES AS A SINGLE PAGE (2in1) Two original pages can be reduced to half their original size and sent together as a single page. Portrait-oriented originals Transmission Landscape-oriented originals Transmission This function cannot be used in scan mode, USB memory mode, or data entry mode. Place the original.
Page 574 SCANNER/INTERNET FAX Select the special modes. (1) Touch the [Internet Fax] tab. (2) Touch the [Special Modes] key. SPECIAL MODES (page 5-71) Select 2in1. (1) Touch the [2in1] key so that it is Internet Fax/Special Modes highlighted. Program Erase Dual Page Scan (2) Touch the [OK] key.
Page 575 SCANNER/INTERNET FAX Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
Page 576: Changing The Print Settings For The Transaction Report (Transaction Report)
SCANNER/INTERNET FAX CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) A transaction report is automatically printed out to alert you when an Internet fax transmission fails or when a broadcast transmission is performed. The transaction report contains a description of the transmission (date, start time, name of other party, time required, number of pages, result, etc.).
Page 577 SCANNER/INTERNET FAX Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
Page 578: Eliminating Blank Pages From Atransmission (Blank
SCANNER/INTERNET FAX ELIMINATING BLANK PAGES FROM A TRANSMISSION (Blank Page Skip) When blank pages are included in originals scanned using the automatic document feeder, the blank pages can be detected and automatically eliminated from transmission. Blank pages are not sent Blank pages Send •...
Page 579 SCANNER/INTERNET FAX Set blank page skipping. (1) Select the type of blank page to be skipped. Scan/Special Modes Select from two types. Cancel Blank Page Skip To include blank pages on which the content on the opposite side shows through, touch [Skip Blank and Back Shadow].
Page 580: Checking The Status Of Transmission/Reception Jobs
SCANNER/INTERNET FAX CHECKING THE STATUS OF TRANSMISSION/RECEPTION JOBS This section explains how to check the status of reserved transmission jobs and received Internet faxes. JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the touch panel is touched. The job status screen shows the status of jobs by mode.
Page 581: Job Queue Screen And Completed Job Screen
SCANNER/INTERNET FAX JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of two screens: the job queue screen that shows reserved jobs and the job currently in progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key ((2) below).
Page 582 SCANNER/INTERNET FAX Job key display The following information is shown in the job queue keys and completed job keys that appear in the job status screen. Direct SMTP information is also included in Internet fax transmission/reception information. AAA AAA 10:22 04/01 000/004 Waiting (1) (2) Displays the number (position) of the job in the job queue.
Page 583 SCANNER/INTERNET FAX • Completed job Display Status "Send OK" Transmission was completed. "In Memory" An Internet fax has been received but has not yet been printed. "Received" Printed received fax data. "Forward OK" A received Internet fax has been forwarded. "Stopped"...
Page 584: Operation When A Job In The Job Queue Is Completed
SCANNER/INTERNET FAX OPERATION WHEN A JOB IN THE JOB QUEUE IS COMPLETED When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the status column. Received Internet faxes, timer transmission jobs, and forwarding jobs are handled in the job status screen as explained below.
Page 585: Checking Completed Jobs
SCANNER/INTERNET FAX CHECKING COMPLETED JOBS (The productivity kit is required.) You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed jobs that used document filing function, broadcast transmission jobs, and received Internet fax forwarding jobs.
Page 586: Stopping A Scan Job Being Transmitted Or Waiting To Be Transmitted
SCANNER/INTERNET FAX STOPPING A SCAN JOB BEING TRANSMITTED OR WAITING TO BE TRANSMITTED Follow the steps below to stop a job that is being transmitted or is waiting to be transmitted. Press the [JOB STATUS] key ( Select the job that you wish to stop. (1) Touch the mode tab of the job to be Print Job Scan to...
Page 587: Giving Priority To A Scan Transmission Job
SCANNER/INTERNET FAX GIVING PRIORITY TO A SCAN TRANSMISSION JOB When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If you need to give priority to a job and send it ahead of the other jobs, follow the steps below. Press the [JOB STATUS] key ( Select the job to which you wish to give priority.
Page 588: Checking The Internet Fax Activity
SCANNER/INTERNET FAX CHECKING THE INTERNET FAX ACTIVITY LOG (Image Sending Activity Report) IMAGE SENDING ACTIVITY REPORT You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 200 transactions are included in the report.
Page 589: Internet Fax Reception Functions
SCANNER/INTERNET FAX INTERNET FAX RECEPTION FUNCTIONS This section explains the basic procedures for receiving Internet faxes. RECEIVING AN INTERNET FAX The Internet fax function periodically* connects to the mail server (POP3 server) and checks whether or not Internet faxes have been received. When faxes have been received, the faxes are automatically retrieved and printed. * The default setting is once every 5 minutes.
Page 590: Manually Receiving Internet Faxes
SCANNER/INTERNET FAX MANUALLY RECEIVING INTERNET FAXES If the interval for checking for received faxes is somewhat long and you wish to check immediately, you can manually initiate reception. Touch the [I-Fax Manual Reception] key to connect to the mail server and retrieve received faxes. Scan Internet Fax USB Mem.
Page 591: Printing A Password-Protected Fax (Hold Setting For Received Data Print)
SCANNER/INTERNET FAX PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" in the system settings (administrator) can be enabled to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is enabled, a password entry screen appears in the touch panel when received Internet faxes are retrieved.
Page 592: Checking The Image Before Printing
SCANNER/INTERNET FAX CHECKING THE IMAGE BEFORE PRINTING (The productivity kit is required.) When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image.
Page 593: Checking The Image Before Forwarding
SCANNER/INTERNET FAX CHECKING THE IMAGE BEFORE FORWARDING (The productivity kit is required.) When "Received Data Image Check Setting" is enabled in the system settings (administrator), you can select the received data from the list and forward it to the addresses recorded in the address book. When this function is enabled, follow the steps below to forward the received image.
Page 594 SCANNER/INTERNET FAX Start forward Touch the [Start forward.] key. AAA AAA BBB BBB Address Review CCC CCC DDD DDD EEE EEE FFF FFF GGG GGG HHH HHH III III JJJ JJJ Freq. ABCD EFGH IJKL MNOP QRSTU VWXYZ etc. Sort Address Start forward.
Page 595: Image Check Screen
SCANNER/INTERNET FAX IMAGE CHECK SCREEN (The productivity kit is required.) This section explains the image check screen. Back Image Check AAA AAA 04/04/2013 10:28 1 / 3 Display Rotation Print 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees.
Page 596: Forwarding Received Internet Faxes To An Address (Inbound Routing Settings)
SCANNER/INTERNET FAX FORWARDING RECEIVED INTERNET FAXES TO AN ADDRESS (Inbound Routing Settings) (The productivity kit is required.) Received Internet faxes can be automatically forwarded to a facsimile internet fax, e-mail address, file server address, desktop address, or network folder address. When this function is enabled, you can also have received Internet faxes forwarded without printing them.
Page 597 SCANNER/INTERNET FAX Storing sender addresses. If you wish to have only faxes from specified addresses forwarded, store the desired sender addresses. Send addresses stored here can be selected from a list when you store a forwarding table. (1) Click [Sender Number/Address Registration] in the [Inbound Routing Settings] menu in the Web page.
Page 598 SCANNER/INTERNET FAX Store a forwarding table. Follow the steps below to store a forwarding table that combines a specified sender and forwarding address. (1) Click [Inbound Routing Settings] in the Web page menu and click the [Add] button. (2) Enter a "Table Name". (3) Select the line used for reception.
Page 599 SCANNER/INTERNET FAX Specifying forwarding tables to be used. To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables. (1) Click [Inbound Routing Settings] in the Web page menu. (2) Select [Always Forward] or [Forward on Selected Day &...
Page 600: Scanning From A Computer (Pc Scan Mode)
SCANNER/INTERNET FAX SCANNING FROM A COMPUTER (PC Scan Mode) (The productivity kit is required.) BASIC SCANNING PROCEDURE You can install the scanner driver on your computer from the CD-ROM that accompanies the machine, and use a TWAIN* compliant application to scan an image using your computer. Scanning from your computer is most useful for scanning a single original such as a photo, particularly when you want to adjust scan settings as you scan.
Page 601 [Select Scanner] from the [File] menu. Select the scanner driver of the machine. (1) Select [SHARP MFP TWAIN K]. (2) Click the [Select] button. Select [Acquire Image] from the [File] menu. The scanner driver opens.
Page 602 SCANNER/INTERNET FAX Preview the image. (1) Select the location where the original is placed. "Scanning Source" menu: • If the original is a one-sided original and is placed in the document feeder tray, select [SPF(Simplex)]. • If the original is a 2-sided original and is placed in the document feeder tray, select [SPF(Duplex - Book)] or [SPF(Duplex - Tablet)] depending on whether the original is a book-style or tablet-style original.
Page 603 SCANNER/INTERNET FAX Select scanning settings while viewing the image. [Rotate] button: Each time this button is clicked, the preview image rotates 90 degrees. This lets you change the orientation of the image without picking up and placing the original again. The image file will be created using the orientation that appears in the preview window.
Page 604 SCANNER/INTERNET FAX [At the machine] Touch the [Exit] key in the touch panel. This machine is in the PC scan mode. Do not remove the original. Scanner IP address:250.160.102.106 Exit Touch the [Yes] key. PC scan in progress. Finish PC scan mode? 5-123 Contents...
Page 605: Metadata Delivery
SCANNER/INTERNET FAX METADATA DELIVERY This section explains metadata delivery, which can be used when the application integration module kit is installed. (The productivity kit is required.) METADATA DELIVERY (Data Entry) When the application integration module kit is installed and an image file is generated for a scan send transmission, metadata (data indicating the attributes of the image file and how it is to be processed) can be generated based on pre-stored information and transmitted as a separate file.
Page 606: Preparations For Metadata
SCANNER/INTERNET FAX PREPARATIONS FOR METADATA TRANSMISSION SETTINGS REQUIRED IN THE WEB PAGES All settings related to metadata are configured in the Web pages. (Administrator rights are required.) To configure metadata settings, click [Application Settings] and then [Metadata Settings] in the Web page menu. When configuring settings, be sure to enable metadata transmission.
Page 607: Transmitting Metadata
SCANNER/INTERNET FAX TRANSMITTING METADATA Follow the steps below to select a metadata set, enter each item, and perform metadata transmission. Switch to data entry mode and display the metadata set screen. Scan Internet Fax Data Entry (1) Touch the [Data Entry] tab. Address Book Original Scan:...
Page 608 SCANNER/INTERNET FAX Enter the selected metadata item. (1) Touch the key of the value that you wish to Data Entry enter. Cancel User ID • When the entry values of the metadata item are in the Direct Entry form of selections, the selections are shown as keys. Value 1 Value 2 When a value is editable, you can touch the [Direct...
Page 609: Metadata Fields
SCANNER/INTERNET FAX METADATA FIELDS The following three types of metadata are included in the XML file that is transmitted. • Data automatically generated by the machine: These data are always included in the XML file and are automatically stored on your computer. •...
Page 610: Network Scanner / Internet Fax Specifications
SCANNER/INTERNET FAX NETWORK SCANNER / INTERNET FAX* SPECIFICATIONS Type Built-in 100 x 100, 200 x 200, 300 x 300, 400 x 400, 600 x 600 Scanning resolution (dpi) Internet Fax: 200 x 100, 200 x 200, 200 x 400, 400 x 400, 600 x 600 (200 x 100, 200 x 200 when file type is TIFF-S) Halftone can be selected for resolutions other than 200 x 100 dpi.
Page 611 CHAPTER 6 DOCUMENT FILING (The productivity kit is required.) This chapter provides detailed explanations of the procedures for using the document filing function. The document filing function allows you to save the document data of a copy or fax job, or the data of a print job, as a file on the machine's hard drive.
Page 612: Overview
DOCUMENT FILING DOCUMENT FILING This section provides information that you should know before using the document filing function, including an overview of document filing, the features and functions of document filing, and points to keep in mind when using document filing. OVERVIEW The document filing function allows you to save the document image of a copy or image send job, or the data of a print job, as a file on the machine's hard drive.
Page 613: Uses Of Document Filing
DOCUMENT FILING USES OF DOCUMENT FILING Quickly using a file Example: You prepared handouts consisting of numerous pages for a meeting, however, another handout is needed for a newly added participant. The handout was not saved using document filing The handout was saved using document filing Ratio, colour mode, and special mode settings must be reselected.
Page 614: Before Using Document Filing
DOCUMENT FILING BEFORE USING DOCUMENT FILING This section provides information that you should know before using the document filing function. Folders Three types of folders are used to store files by document filing. Folders on the hard drive Main Folder Quick File Folder Custom Folder...
Page 615 DOCUMENT FILING Approximate number of pages and files that can be stored by document filing Combined total number of pages and total number of files that can be stored in custom folders and in the Main folder Examples of original types Number of pages* Number of files Full colour...
Page 616 DOCUMENT FILING Automatic deletion of files You can have document filing data in specified folders automatically deleted at regular intervals by specifying the folders and the time. Periodic deletion of files stored in the machine helps to prevent the leaking of sensitive information and frees space on the hard drive.
Page 617: Important Points When Using Document Filing
Do not store sensitive documents or documents that you do not want to be used by others. • Except in cases provided for by law, SHARP Corporation bears no responsibility for any damages that result from the leaking of sensitive information due to manipulation by a third party of any data saved using the Quick File function or File function, or incorrect operation of the Quick File function or File function by the operator that saves the data.
Page 618: Using Document Filing In Each Mode
DOCUMENT FILING USING DOCUMENT FILING IN EACH MODE In copy or image send mode, the original can be saved as a file on the hard drive at the same time it is copied or transmitted. In addition, Scan to HDD can be used to save the scanned data of an original to the hard drive without copying or transmitting the data.
Page 619 DOCUMENT FILING Scan to HDD mode The scanned original is saved as an image file. Neither printing nor transmission are performed when Scan to HDD is used. (1) Touch the [DOCUMENT FILING] key. (2) Touch the [Scan to HDD] tab. DOCUMENT COPY IMAGE SEND...
Page 620: Base Screen Of Document Filing
DOCUMENT FILING BASE SCREEN OF DOCUMENT FILING MODE Touch the [DOCUMENT FILING] key in the touch panel to open the base screen of document filing mode. Files stored on the hard drive in the machine can be retrieved from this screen. When user authentication is used and My Folder is configured, the file selection screen of My Folder will appear.
Page 621: Saving Files With Document Filing
DOCUMENT FILING SAVING FILES WITH DOCUMENT FILING This chapter explains how to save an original as an image file using the Quick File, File, and Scan to HDD functions of document filing mode. SAVING A FILE WITH "Quick File" When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB memory scan mode), "Quick File"...
Page 622 DOCUMENT FILING Select copy settings and then press the [COLOUR START] key or the [BLACK & WHITE START] key. • Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved. •...
Page 623: Saving A File With "File
DOCUMENT FILING SAVING A FILE WITH "File" When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB memory scan mode), "File" can be selected to save an image of the document to the Main folder or a previously created custom folder.
Page 624 DOCUMENT FILING Select copy settings and then press the [COLOUR START] key or the [BLACK & WHITE START] key. • Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved. •...
Page 625: File Information
DOCUMENT FILING FILE INFORMATION This section explains the settings that are configured in step 3 of "SAVING A FILE WITH "File"" (page 6-13). Specifying a user name, file name, folder, and confidential setting makes it easier to manage and search for a file. In addition, when confidential is selected and a password is established, other people will not be able to view the file without permission.
Page 626 DOCUMENT FILING Assigning a file name A file name can be assigned to the file. Touch the [File Name] key. File Information Cancel A text entry screen will appear. Enter the file name and touch the [OK] key. Confidential A maximum of 30 characters can be entered. Password User Name User Unknown...
Page 627 DOCUMENT FILING Storing a file as a confidential file A password can be set for the file to prevent others from viewing it. Set a password (5 to 8 digits) with the numeric keys. Enable the confidential property. (1) Select the [Confidential] checkbox so that a File Information Cancel checkmark...
Page 628: Saving A Document File Only
DOCUMENT FILING SAVING A DOCUMENT FILE ONLY (Scan to HDD) Scan to HDD is used to store a scanned document in the Main folder or a custom folder. Neither printing nor transmission are performed. "Scan to HDD" SCREEN The following screen appears when the [Scan to HDD] tab is touched in document filing mode. Touch the keys below to select Scan to HDD settings.
Page 629 DOCUMENT FILING [Original] key When the [Original] key is touched, the following screen appears. This screen is used to change the original size and select scanning settings for 2-sided originals. Scan to HDD/Original Scan Size 100% Store Size Auto Auto Original Image Orientation 2-Sided...
Page 630 DOCUMENT FILING [Colour Mode] key Touch the [Colour Mode] key to open the colour mode setting screen for Scan to HDD. Scan to HDD/Colour Mode Colour Mode Full Colour Auto Colour Mode 2 Colour B/W Mode Mono2 Greyscale The following settings can be selected for the scanning colour when the [COLOUR START] key or the [BLACK & WHITE START] key is pressed.
Page 631 DOCUMENT FILING Special modes screen for Scan to HDD When the [Special Modes] key is touched, the following screen appears. For more information on each setting, see "SPECIAL MODES" (page 5-71) in "5. SCANNER / INTERNET FAX". Scan to HDD/Special Modes Erase Dual Page Card Shot...
Page 632 DOCUMENT FILING Checking the image before storing it (Preview) If you touch the [Preview] key and then start Scan to HDD, the screen below appears. Before the scanned data is stored, you can check a preview of the scanned image in this screen and return to the Scan to HDD settings screen to change settings Reset Preview...
Page 633: Performing "Scan To Hdd
DOCUMENT FILING PERFORMING "Scan to HDD" Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Switch to document filing mode and select Scan to HDD settings. DOCUMENT COPY IMAGE SEND FILING (1) Touch the [DOCUMENT FILING] key.
Page 634: Using Stored Files
DOCUMENT FILING USING STORED FILES This section explains how to retrieve a file stored by document filing and print or transmit the file. SEQUENCE FOR USING A STORED FILE This section explains the basic procedure for retrieving and using a stored file. The screens and procedures differ depending on whether or not user authentication is enabled.
Page 635 DOCUMENT FILING Select the file that you wish to retrieve. • Select the folder in the folder selection screen. File Retrieve Scan to HDD HDD Status Ex Data Access When the folder is selected, the files in the folder will Search Back Main Folder...
Page 636: Folder And File Selection Screens
DOCUMENT FILING FOLDER AND FILE SELECTION SCREENS To use a file stored by document filing, the folder and file must be selected. The folder selection screen and file selection screen are explained below. FOLDER SELECTION SCREEN Two different screens appear depending on whether or not user authentication is enabled on the machine. When user authentication is not enabled When user authentication is enabled Search...
Page 637: File Selection Screen
DOCUMENT FILING FILE SELECTION SCREEN The file selection screen of the Quick File folder, Main folder, and custom folders is explained below. The file selection screen can be displayed in "List screen" format or "Thumbnail screen" format. (To select the format, see "(5) [Switch Display] key"...
Page 638 DOCUMENT FILING [Multi-File Print] key Touch this to select multiple files in a folder for printing. MULTI-FILE PRINTING (page 6-33) Sort Order / Display Items This can be used in the thumbnail screen. The order of display of the file thumbnails can be changed in "Sort Order".
Page 639: Selecting A File
DOCUMENT FILING SELECTING A FILE This section explains how to select a file to be used. Select the folder that contains the file you wish to use. DOCUMENT COPY IMAGE SEND FILING (1) Touch the [DOCUMENT FILING] key. The folder selection screen will appear. If a different tab File Retrieve Scan to HDD HDD Status...
Page 640: Job Settings Screen
DOCUMENT FILING JOB SETTINGS SCREEN When a file key is touched, the following screen appears. Touch the key of the operation that you wish to perform and select settings. File Retrieve Scan to HDD HDD Status Ex Data Access Cancel Job Settings Search Back...
Page 641: Printing A Stored File
DOCUMENT FILING PRINTING A STORED FILE A file stored using document filing can be retrieved and printed when needed. The settings used when the file was stored are also stored, and thus the file can be printed again using those settings. The file can also be modified before printing by changing the print settings.
Page 642: Print Settings Screen
DOCUMENT FILING PRINT SETTINGS SCREEN Cancel Job Settings / Print file-01 Name 1 F. Colour Paper Select Number of Prints Auto Print and Delete the Data (1 999) Output Print and Save the Data 2-Sided Special Modes B/W Print [Paper Select] key Use this key to set the paper size.
Page 643: Multi-File Printing
DOCUMENT FILING MULTI-FILE PRINTING Multiple files in a folder can be selected for printing. Touch the [Multi-File Print] key. Search Back Main Folder To select files of a particular job type, touch the [Switch File Name User Name Date Display] key, select the job type from the screen that appears, file-01 Name 1 04/04/2013...
Page 644 DOCUMENT FILING Printing a selected file. (2) (3) The number of selected files appears in the number of selected Cancel Job Settings / Print files display. Number of Selected Files: 5 If you wish to use the number of copies that was stored with the file, go to step (3).
Page 645 DOCUMENT FILING Batch printing All files in a folder that have the same user name and password can be printed at once. When the [Multi-File Print] key is touched, it changes into the [Batch Print] key. Touch the [Batch Print] key. Select All Back Multi-File Print...
Page 646 DOCUMENT FILING If a password has been established, Cancel Batch Print touch the [Password] key. User 1/ All Files Enter the password with the numeric keys (5 to 8 digits) and User Name Name 1 touch the [OK] key. Only files that have the same password will Password be selected.
Page 647: Sending A Stored File
DOCUMENT FILING SENDING A STORED FILE A file stored by document filing can be retrieved and transmitted whenever needed. The settings used when the file was stored are also stored, and thus the file can be transmitted using those settings. If needed, you can also change the transmission settings to modify the retrieved file.
Page 648: Send Settings Screen
DOCUMENT FILING SEND SETTINGS SCREEN The keys that appear in the send settings are explained below. For more information on each of the settings, see "BASE SCREEN OF FAX MODE" (page 4-7) in "4. FACSIMILE" and "BASE SCREEN" (page 5-9) in "5. SCANNER / INTERNET FAX".
Page 649: Properties Of Stored Files
DOCUMENT FILING PROPERTIES OF STORED FILES FILE PROPERTIES A protect setting can be selected for files saved with the document filing function. This prevents a file from being moved, or automatically or manually deleted. Three properties are available for saved files: [Sharing], [Protect], and [Confidential]. When saved with the [Sharing] property, a file is not protected.
Page 650 DOCUMENT FILING Restrictions on changing the property • A file that is set to "Sharing" can be changed to "Protect" or "Confidential". However, a "Sharing" file that is saved in the Quick File folder can only be changed to "Protect". •...
Page 651: Moving A Stored File
DOCUMENT FILING MOVING A STORED FILE Use this procedure to change the location of a file (move a file to a different folder). After selecting the desired file, follow the steps below. SELECTING A FILE (page 6-29) Touch the [Move] key. Cancel Job Settings file-01...
Page 652 DOCUMENT FILING Touch the [Move] key. Cancel Job Settings / Move file-01 Name 1 F. Colour Select the folder the file is moved to. File Name file-01 Move to: User 2 Move A file whose property is "Protect" cannot be moved. To move a protected file, change its property to "Sharing" or "Confidential".
Page 653: Deleting A Stored File
DOCUMENT FILING DELETING A STORED FILE Stored files that are no longer needed can be deleted. Select the file that you wish to delete and touch the [Delete] key. SELECTING A FILE (page 6-29) Touch the [Delete] key. Cancel Job Settings file-01 Name 1 F.
Page 654: Checking An Image Of A Stored File
DOCUMENT FILING CHECKING AN IMAGE OF A STORED FILE You can check an image of a file stored using document filing. Select the desired file and touch the [Image Check] key. SELECTING A FILE (page 6-29) Depending on the size of the image, part of the image may be clipped off in the image check screen on the touch panel. Touch the [Image Check] key.
Page 655: Image Check Screen
DOCUMENT FILING IMAGE CHECK SCREEN This section explains the image check screen. Image Check Back file-01 Name 1 F. Colour Display Rotation Detail 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees. The rotation applies to all pages in the file, not just the Preview image displayed page.
Page 656: Retrieving And Using A File From The Job Status Screen
DOCUMENT FILING RETRIEVING AND USING A FILE FROM THE JOB STATUS SCREEN Files stored using File and Quick File appear as keys in the job status complete screen. This is convenient when you need to quickly print the saved data of a copy job or quickly send a saved fax to another destination.
Page 657: Searching For A Stored File
DOCUMENT FILING SEARCHING FOR A STORED FILE When there are many stored files, it may take time to find a file. The search function of document filing mode can be used to find a file quickly. This section explains how to search for a file or folder on the machine's hard drive. Searching is possible even when you only know part of the file name or folder name.
Page 658 DOCUMENT FILING Using the user name to search (B)(D) There are four ways to select the user name: Cancel User Name (A) Touch the key of the user name. Name 1 Name 2 The touched user name is highlighted. Name 3 Name 4 If you accidentally select the wrong user name, touch the Default User...
Page 659 DOCUMENT FILING Touch the [Start Search] key. Search Cancel Start Search The search results will appear in a screen similar to the following screen. A list of the files that match your search User Name Name 1 criteria will appear. Select the desired file from the list. The job File or Folder Name file-01 settings screen will appear.
Page 660 DOCUMENT FILING Searching within a folder You can specify a folder to restrict the search range to that folder. To search within a specified folder, follow the steps below. Open the folder that you wish to search. (1) Touch the [DOCUMENT FILING] key. DOCUMENT COPY IMAGE SEND...
Page 661 DOCUMENT FILING Using the user name to search (B)(D) There are four ways to select the user name: Cancel User Name (A) Touch the key of the user name. Name 1 Name 2 The touched user name is highlighted. Name 3 Name 4 If you accidentally select the wrong user name, touch the Default User...
Page 662 DOCUMENT FILING Start searching. (1) Touch the [Search within Current Folder] Cancel Start Search Search checkbox so that it is selected To search only files that are in the current folder, select User Name Name 1 the [Search within Current Folder] checkbox File or Folder Name file-01 Use this method to search for a file in a confidential folder.
Page 663 CHAPTER 7 SYSTEM SETTINGS This chapter explains the system settings, which are used to configure a variety of parameters to suit the aims and needs of your workplace. The current selections that have been made for the settings can be viewed or printed out. To quickly check where a setting is located in the system settings menu, see "SYSTEM SETTINGS MENU"...
Page 664 Storing/Calling of System Settings ..7-102 Sharp OSA Settings ..... . 7-103 SYSTEM SETTINGS FOR FAX System Settings for Fax (General) List .
Page 665: System Settings
SYSTEM SETTINGS SYSTEM SETTINGS System Settings The system settings are used to configure a variety of parameters to suit the aims and needs of your workplace. The system settings are also used to display or print out the current settings and status of the machine. The system settings allow you to make the machine easier to use.
Page 666: Common Operation Methods
SYSTEM SETTINGS Common Operation Methods This section explains special operation methods that are common to all system settings. Be sure to read this section, as the information is omitted in the explanations of some of the individual settings. Example: Address book screen System Settings Address Book Back...
Page 667: System Settings (General)
SYSTEM SETTINGS SYSTEM SETTINGS (GENERAL) This section describes the system settings that can be configured by general users of the machine. Accessing the System Settings (General) Make sure that the machine is in the standby state and then press the [SYSTEM SETTINGS] key ( ) on the touch panel.
Page 668: System Settings (General) List
SYSTEM SETTINGS System Settings (General) List When the system settings are accessed with general rights, the following items appear. For items that can only be accessed with administrator rights, see "System Settings (Administrator) List" (page 7-31). • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. •...
Page 669 SYSTEM SETTINGS Paper Tray Settings Item Factory default setting Page 7-13 Paper Tray Settings Tray Settings  Tray 1 Plain, A4 (8-1/2" x 11")  Tray 2* Plain, Auto-AB (Auto-Inch)  Tray 3* Plain, Auto-AB (Auto-Inch)* Plain, A4 (8-1/2" x 11")* 7-13 ...
Page 670 SYSTEM SETTINGS Printer Condition Settings Item Factory default setting Page 7-23 Printer Condition Settings Printer Default Settings  Copies  Orientation Portrait  Default Paper Size A4 (8-1/2" x 11")  Default Output Tray Varies depending on the machine configuration ...
Page 671 SYSTEM SETTINGS Document Filing Control* Item Factory default setting Page 7-26 Document Filing Control * The productivity kit is required. USB-Device Check Item Factory default setting Page – 7-27 USB-Device Check User Control Item Factory default setting Page 7-27 User Control* Amend User Information –...
Page 672: Total Count
SYSTEM SETTINGS Total Count This function shows the page count in each mode. Touch the [Total Count] key. Job Count This displays or prints out the counts of all jobs. • A3 (11" x 17") size paper is counted as two sheets. •...
Page 673: Default Settings
SYSTEM SETTINGS Default Settings The default settings for operation of the machine can be configured. Touch the [Default Settings] key and select the settings. Clock Adjust Use this to set the date and time in the machine's built-in clock. Set the time. Item Settings If your region is ahead of GMT (Greenwich Mean Time), select [+].
Page 674: Keyboard Select
SYSTEM SETTINGS Date Format The format used to print the date on lists and other output can be changed. Item Settings Current Setting The current time appears in the format set in the date format settings. Format Set the order of display of the year, month, and day. Separator Select one of three symbols or a blank space for the separator used in the date.
Page 675: Paper Tray Settings
SYSTEM SETTINGS Paper Tray Settings Paper tray and paper type settings are explained in this section. Touch the [Paper Tray Settings] key to configure the settings. Tray Settings These settings specify the paper type, paper size, and functions allowed for each paper tray. When the [Tray Settings] key is touched, a list appears showing the trays and the current settings.
Page 676 SYSTEM SETTINGS Tray Settings Paper Tray Paper Type Size Plain, Pre-Printed, A3, A4, A4R, A5R, B4, B5, B5R, 216 mm x 330 mm (8-1/2" x 13"), Recycled, Letter Head, 216 mm x 343 mm (8-1/2" x 13-1/2"), Tray 1 Pre-Punched, Colour, 11"...
Page 677: Paper Type Registration
SYSTEM SETTINGS Paper Type Registration Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of paper properties. Up to 7 paper types can be stored. Item Description Store any name.
Page 678: Address Control
SYSTEM SETTINGS Address Control Address Control is used to store, edit, and delete one-touch keys, group keys, program keys, and custom indexes. Touch the [Address Control] key to configure the settings. • The settings that can be selected vary depending on the peripheral devices installed. •...
Page 679 SYSTEM SETTINGS Settings Item Description Items stored in all modes Select the type of address to be stored in the address book. • E-mail: Store an e-mail address in a one-touch key. • Internet Fax: Store an Internet fax address in a one-touch key. Address Type •...
Page 680 SYSTEM SETTINGS Item Description Items appearing when a Direct SMTP address is stored Use these three settings to set an address for Direct SMTP transmission. In many cases, transmission is possible using method (1). A maximum of 64 characters each can be entered in the "Direct SMTP Address" and "Hostname or IP Address"...
Page 681 SYSTEM SETTINGS Touch the [Address Book] key. Touch the [Add New] key. AAA AAA BBB BBB CCC CCC DDD DDD EEE EEE FFF FFF Select "Group" from the [Address Type] list. Set the [Group Name], [Initial], and [Key Name] settings. (Other settings can be adjusted as necessary.) (1-1000) Use the scroll bar to display the lower...
Page 682: Custom Index
SYSTEM SETTINGS Touch the one-touch keys that you want to add to the group. (Three keys are AAA AAA BBB BBB added in this example.) CCC CCC DDD DDD EEE EEE FFF FFF GGG GGG Touch the [OK] key. AAA AAA BBB BBB CCC CCC DDD DDD...
Page 683: Program
SYSTEM SETTINGS Program If you frequently use the same settings and/or functions to transmit to the same destination or destinations, the settings and destinations can be stored in a program. This allows the settings and destinations to be selected by simply selecting the program.
Page 684: Fax Data Receive/Forward
SYSTEM SETTINGS Fax Data Receive/Forward This section explains settings for reception and forwarding. Touch the [Fax Data Receive/Forward] key and configure the settings. For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX" (page 7-104). I-Fax Settings These settings can be configured when the Internet fax expansion kit is installed.
Page 685: Printer Condition Settings
SYSTEM SETTINGS Printer Condition Settings The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS application. To configure the settings, touch the [Printer Condition Settings] key. Printer Default Settings The default settings are used to set advanced print conditions for printing in an environment where the print driver is not used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
Page 686: Pcl Settings
SYSTEM SETTINGS *2 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other specialized uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a width of 1 dot.
Page 687: Postscript Setting
SYSTEM SETTINGS PostScript Setting When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and whether or not the PostScript data is received in binary format. Settings Item Description Selections When a PS (PostScript) error •...
Page 688: Document Filing Control
SYSTEM SETTINGS Document Filing Control (The productivity kit is required.) Document Filing Control is used to create, edit, and delete custom folders for document filing. Touch the [Document Filing Control] key to configure the settings. When the [Document Filing Control] key is touched, the following screen will appear. Folder List Back Add New...
Page 689: Usb-Device Check
SYSTEM SETTINGS USB-Device Check This lets you check the connection when a USB device is connected to the machine. Touch the [USB-Device Check] key to check the connection. The status of a USB device that is not compatible with the machine will not appear. User Control This section explains settings for user control.
Page 690: System Settings (Administrator)
SYSTEM SETTINGS SYSTEM SETTINGS (ADMINISTRATOR) This section explains the system settings that are configured by the administrator of the machine. Accessing the System Settings (Administrator) To access the system settings (administrator), the administrator must log in as explained below. When User Authentication is not Enabled When "User Authentication Setting"...
Page 691: When User Authentication Is Enabled
SYSTEM SETTINGS When User Authentication is Enabled When "User Authentication Setting" (page 7-47) is enabled, follow the procedure below to log in. When auto login is enabled, the login screen will not appear. When user authentication is by login name and password (and e-mail address) Administrator login is performed in the user selection screen.
Page 692 SYSTEM SETTINGS Login by user number Touch the [Admin Login] key. User Authentication Enter the administrator password in the administrator password entry screen. This completes the administrator login procedure. The system settings (administrator) can be used. Admin Login • In addition to login by touching the [Admin Login] key, the system settings (administrator) can also be accessed when login is performed by selecting a user with administrator rights from the user list or by entering a user number with administrator rights.
Page 693: System Settings (Administrator) List
SYSTEM SETTINGS System Settings (Administrator) List The system settings that appear following administrator login are shown below. The default setting for each item is also shown. • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. •...
Page 694 SYSTEM SETTINGS Energy save Item Factory default setting Page 7-61 Energy Save Eco Scan Setting Enabled 7-61 Power Management Setting 7-61  Toner Save Mode 7-61  Print Disabled  Preheat Mode Setting 11 min. 7-61  Turn off Panel Display during pre-heat mode Enabled ...
Page 695 SYSTEM SETTINGS Item Factory default setting Page Customize Key Setting*  Copy  Customize 1 File 7-65  Customize 2 Quick File  Customize 3 –  Scan  Customize 1 Address Review  Customize 2 File  Customize 3 Quick File ...
Page 696 SYSTEM SETTINGS Item Factory default setting Page  Operation from Specified PC  Operational Authority Prohibited  Hostname or IP Address of PC –  View Password Entry Screen Display in Both PC and MFP 7-67  Operation by User who Has Password ...
Page 697 SYSTEM SETTINGS Item Factory default setting Page  Disabling of Tray Settings Disabled 7-71  Disabling of Finisher* Disabled 7-71  Disabling of Offset Disabled 7-71  Disabling of Stapler* Disabled 7-71  Disabling of Punch* Disabled 7-71  Disabling of Colour Mode* Disabled 7-71...
Page 698 SYSTEM SETTINGS Item Factory default setting Page  Card Shot Settings  Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8") 7-73  Fit to Page Disabled  Initial Tab Copy Setting 10 mm (1/2") 7-73  Disabling Deletion of Job Programs Disabled 7-74 ...
Page 699 SYSTEM SETTINGS Printer Settings Item Factory default setting Page 7-78 Printer Settings Default Settings 7-78  Prohibit Notice Page Printing Enabled 7-78  Prohibit Test Page Printing Disabled 7-78  A4/Letter Size Auto Change Varies depending on country and region 7-78 ...
Page 700 SYSTEM SETTINGS Item Factory default setting Page  Image Orientation Portrait 7-81  Initial Resolution Setting • Scan Apply the Resolution Set when Stored: Disabled 200 X 200 dpi • Internet Fax* Apply the Resolution Set when 7-81 Stored: Disabled 200 X 100 dpi •...
Page 701 SYSTEM SETTINGS Item Factory default setting Page  Own Name and Destination Set  Sender Data Registration • Sender Name – 7-84 • Sender Fax Number – • I-Fax Own Address –  Registration of Own Name Select – 7-84 Scan Settings 7-85 ...
Page 702 SYSTEM SETTINGS Item Factory default setting Page  Speaker Volume Setting – • Receive Signal Middle 7-87 • Communication Error Signal Middle  Original Print on Transaction Report Print Out Error Report Only 7-87  Transaction Report Print Select Setting •...
Page 703 SYSTEM SETTINGS Document Filing Settings* Item Factory default setting Page 7-91 Document Filing Settings Other Settings 7-91  Default Mode Settings Sharing Mode 7-91  Sort Method Setting Date 7-91  Administrator Authority Setting  Delete File Disabled 7-91  Delete Folder Disabled ...
Page 704 SYSTEM SETTINGS Item Factory default setting Page Document Output Options  Printer  Copier Enabled  Printer Enabled  Scan Send Disabled  Internet Fax Send (Incl. PC-I-Fax)* Disabled  Fax Send (Incl. PC-Fax)* Disabled  Scan to HDD Enabled ...
Page 705 SYSTEM SETTINGS List Print (Administrator) Item Factory default setting Page 7-94 List Print (Administrator) Administrator Settings List – 7-94 Image Sending Activity Report – 7-94 Data Receive/Forward List – 7-94 Web Settings List* – 7-94 Metadata Set List* – 7-94 *1 When network connection is enabled.
Page 706 SYSTEM SETTINGS Enable/Disable Settings Item Factory default setting Page 7-97 Enable/Disable Settings Printer Condition Settings Disabled 7-97  User Control* 7-97  Disabling of Printing by Invalid User Disabled 7-97 Operation Settings 7-97  Cancel Auto Clear Timer Disabled 7-97 ...
Page 707 Enabled *1 The productivity kit is required. *2 When a paper drawer is installed. *3 When a finisher is installed (DX-2500N only). *4 When a punch module is installed. *5 When a colour-related problem has occurred. *6 When network connection is enabled.
Page 708 7-102 Storing/Calling of System Settings Restore Factory Defaults – 7-102 Store Current Configuration – 7-102 Restore Configuration – 7-102 Sharp OSA Settings Item Factory default setting Page 7-103 Sharp OSA Settings* External Account Setting  External Account Control Disabled 7-103 ...
Page 709: User Control
SYSTEM SETTINGS User Control User Control is used to configure settings for user authentication. Touch the [User Control] key to configure the settings. User Authentication Setting These settings enable or disable user authentication and specify the authentication method. When user authentication is enabled, each user of the machine is registered. When a user logs in, settings for that user are applied.
Page 710: Other Settings
SYSTEM SETTINGS Other Settings Actions when the Limit of Pages Automatically print stored jobs for Output Jobs after login This setting determines whether or not a job will be (The productivity kit is required.) completed if the page limit is reached while the job is in When retention is enabled in the printer driver and print progress.
Page 711 SYSTEM SETTINGS Name of Perform LDAP server access attribute in Attribute Setting control. factory default state Access control information for page count limits, authorities, and favourite operations can be stored on an My Folder myfolder Folder name of user LDAP server, and by using this LDAP server for network folder stored in the authentication, user authentication based on the stored machine.
Page 712 SYSTEM SETTINGS Item Description Display Usage Status after Login E-mail Address Information is acquired from the When user authentication is enabled, this setting LDAP server. specifies whether or not the page counts of a user My Folder appear when the user logs in. Pages Limit Group Authority Group...
Page 713: User List
SYSTEM SETTINGS User List This is used to store, edit, and delete users when user authentication is enabled. When the [User List] key is touched, the following screen appears. User List Back Add New Delete All Users Delete All Users Auto-Registered Administrator User Index Switch...
Page 714 SYSTEM SETTINGS Pages Limit Group Unlimited* Authority Group* Admin User* Guest* Favourite Operation Group Following the System Settings* *1 Items that can be changed. *2 For detailed information of each of the settings, see "List of settings and factory default settings of template groups"...
Page 715: Page Limit Group List
SYSTEM SETTINGS Page Limit Group List This is used to store groups of Account Limit Settings. The page limits for each user are specified by selecting one of these stored groups when the user is stored. When the [Page Limit Group List] key is touched, the following screen appears. System Settings Page Limit Group List Back...
Page 716: Authority Group List
SYSTEM SETTINGS Authority Group List Use this to store groups of user authority settings. The authority of each user is specified by selecting one of these stored groups when the user is stored. When the [Authority Group List] key is touched, the following screen appears. System Settings Authority Group List Back...
Page 717 SYSTEM SETTINGS List of settings and factory default settings of template groups Item Description Group Name Store the name of the group (max. 32 characters). Select one of the previously stored groups for use as a template for the new group.
Page 718 SYSTEM SETTINGS Item Description Prints (Document Filing) Only Black & White • Colour Mode Approval Setting All allowed All allowed Allowed • Special Modes Usage Allowed Allowed Prohibited • Document Filing Image Check Allowed Allowed Prohibited • Display only the Files of Logged-in Prohibited Prohibited Prohibited...
Page 719: Favourite Operation Group List
SYSTEM SETTINGS Favourite Operation Group List This is used to store favourite operation groups and My Menu. Some settings may not be configured depending on the connecting state of peripheral devices. This setting can only be configured in the Web pages. It cannot be configured in the touch panel of the machine. Favourite Operation Group Registration Sets of preferred settings can be as groups.
Page 720 SYSTEM SETTINGS My Menu List Home screen settings must be previously stored. Select a My Menu when storing a favourite operation group. Settings Item Description My Menu Name Enter a maximum of 32 characters for the My Menu name. Select the My Menu to be the Select one of the previously stored My Menus as a template for the new My Menu.
Page 721: User Count
SYSTEM SETTINGS User Count This displays the total number of pages printed by each user. When the [User Count] key is touched, the following screen appears. User Count Back Select All Users Show Delete Administrator User Index Switch Other User Name 1 *Name 2 Name 3...
Page 722 Reset all items of the selected users to "0". Card Setting (when the HID card reader is available.) Configure this setting if user authentication will be performed using a Sharp OSA external authentication application and an HID card. Card Reader Device Registration In this setting, the product ID and vender ID of the connected HID card reader are displayed.
Page 723: Energy Save
Select the time that best suits the needs of your • Document Filing workplace. • System Settings The following settings can be changed if necessary. • Sharp OSA Turn off Panel Display during pre-heat mode Power Management Setting this checkbox to turns off the panel display in Preheat Mode.
Page 724: Power On/Off Schedule Setting
SYSTEM SETTINGS Power ON/OFF Schedule Auto Power Shut-Off Timer Setting Settings that depend on the usage conditions, such as the time until Auto Power Shut-Off activates or the time The machine operator panel can be turned On or Off at a zone for Auto Power Shut-Off can be configured.
Page 725: Operation Settings
Sharp OSA screen*. copy mode or when adjusting the exposure in any mode. * When the application communication module is installed.
Page 726 SYSTEM SETTINGS Disabling of Clock Adjustment This setting is used to prohibit changing of the date and time. Disabling of Covers/Inserts Mode This setting is used to prohibit the use of the covers and inserts function. Set Keyboard Priority When an external keyboard is connected, you can select whether the soft keyboard or the external keyboard is used.
Page 727: Mfp Display Pattern Setting
When [Use Custom Image] is selected, the Mode Key image can be changed using a gif file Image of up to 10 KB in size. A shortcut to the Sharp OSA application and keys that appear in "My Menu" can be stored (a Application Keys total of eight keys can be stored).
Page 728 SYSTEM SETTINGS My Menu Settings Use this to configure the My Menu screen that appears when the [My Menu] key is pressed. The settings are shown below. Item Description Display Title Show a title on the My Menu. Title Enter a maximum of 70 characters for the title name. Display User Name* Show the currently logged-in user name on the My Menu.
Page 729: Preview Setting
Store text that you frequently use when entering an address or domain. Up to 16 characters can be entered. Cookie Setting Select whether or not information about cookies is stored in the MFP when using Sharp OSA. Delete Cookie Delete the information about cookies stored in the MFP.
Page 730: Device Control
SYSTEM SETTINGS Device Control These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings. Other Settings Original Feeding Mode Detect Standard in Auto Colour Mode The following original feeding modes can be set to operate by default in copy, Scan to HDD, and image When the colour mode is set to auto in copy mode, the send modes.
Page 731 SYSTEM SETTINGS Clear All Job Log Data (The productivity kit is required.) This is used to clear the entire job log. (There is normally no need to use this function.) A log file is kept of jobs run on the machine. The job log can be used to check general use of the machine.
Page 732: Original Size Detector Setting
SYSTEM SETTINGS Original Size Detector Setting One of the 8 groups of standard original sizes shown below can be selected for detection by the original size detection function. Detectable original sizes Selections Document feeder tray (automatic Document glass document feeder) A3, A4, A4R, A5, B4, B5, B5R A3, A4, A4R, A5, B4, B5, B5R, 11"...
Page 733: Disabling Of Devices
SYSTEM SETTINGS Disabling of Devices Use these settings when a peripheral device on the machine has failed or when you wish to temporarily disable a device. Disabling of Document Feeder Disabling of Offset Use this setting to prohibit the use of the automatic This setting is used to disable the offset function.
Page 734: Copy Function Settings
SYSTEM SETTINGS Copy Function Settings The following settings are related to copying. Touch the [Copy Function Settings] key to configure the settings. Default settings selected with these settings apply to all functions of the machine (not just the copy function). Initial Status Settings The copier settings are reset when the [POWER] key ( ) is turned on, when the [CLEAR ALL] key (...
Page 735: Other Settings
SYSTEM SETTINGS Other Settings Copy Exposure Adjustment Initial Margin Shift Setting This is used to adjust the exposure level when [Auto] is This is used to set the default margin shift amount. used for the copy exposure. Specify a value from 0 mm (0") to 20 mm (1") in increments of 1 mm ) for both the front and reverse (1/8"...
Page 736 SYSTEM SETTINGS Disabling Deletion of Job Programs B/W 600dpi x 600dpi Scanning Mode for Document Feeder This is used to prohibit the deletion and changing of copy settings stored in job programs. The resolution for copying in black and white using the automatic document feeder can be changed from 600 x 400 dpi to 600 x 600 dpi (high quality mode).
Page 737: Colour Adjustments
SYSTEM SETTINGS Colour Adjustments The following colour settings can be configured. Initial Colour Balance Setting Colour balance values obtained using "Colour Balance" in the special modes can be stored in a program (1 to 48), and those values can be retrieved and stored as the initial colour balance setting*.
Page 738: Network Settings
SYSTEM SETTINGS Network Settings Network settings are described below. Touch the [Network Settings] key to configure the settings. * Depending on your machine specifications, only the items under "General Setting" will be displayed. • When settings are changed, the changes will take effect after the machine is restarted. To restart the machine see "TURNING THE POWER ON AND OFF"...
Page 739: Connection Type Switching
SYSTEM SETTINGS Connection Type Switching Specify the network connection type (wired or wireless). For wireless communication via an access point, select "Wireless (Infrastructure Mode)". (A wired connection already being established at this time will be disabled.) For wireless communication between devices without using an access point, select "Wired + Wireless (Ad-hoc Mode)". For wired connection only (without any wireless communication), select "Wired Only".
Page 740: Printer Settings
SYSTEM SETTINGS Printer Settings Settings related to the printer function can be configured. Touch the [Printer Settings] key to configure the settings. Default Settings Printer condition settings are described below. Prohibit Notice Page Printing Bypass Tray Settings This setting is used to disable printing of notice pages. Enable Detected Paper Size in Bypass Tray This is used to prohibit printing when the paper size specified for a print job is different from the paper size...
Page 741: Interface Settings
SYSTEM SETTINGS Interface Settings These settings are used to control and monitor data transmitted to the USB port or network port of the machine. Hexadecimal Dump Mode Enable Network Port This function is used to print the print data from a This is used to enable printing from the network port.
Page 742: Auto Colour Calibration
SYSTEM SETTINGS Auto Colour Calibration This is used to perform automatic colour correction when the colour in colour printing is off. The machine prints a test patch, the test patch is scanned, and the colour is automatically corrected. After the [Execute] key is touched and a test patch is printed, a message appears prompting you to begin automatic calibration.
Page 743: Image Send Settings
SYSTEM SETTINGS Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings. For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX"...
Page 744 SYSTEM SETTINGS Must Input Next Address Key at Erase Width Adjustment Broadcast Setting This is used to set the default erase width for erase function. Specify a value from 0" (0 mm) to 1" (20 mm) in This setting is used to require that the [Next Address] increments of 1 mm (1/8") for both edge erase and key be touched before the next address is entered when centre erase.
Page 745 SYSTEM SETTINGS Disable Registration of Program Settings to Disable Transmission This prohibits the use of the address book when a These settings are used to disable the following program is stored. transmission operations. Configure the setting for each of the following items: •...
Page 746 SYSTEM SETTINGS Own Name and Destination Set Use this setting to enter the Internet fax address, fax number of the machine and the name of the user. Sender Data Registration Use this to store the sender name for fax and Internet fax, the sender number for fax, and the sender address for Internet fax.
Page 747: Scan Settings
SYSTEM SETTINGS Scan Settings Settings related to scanning can be configured. Other Settings Initial File Format Setting This is used to set the default file format for Scan to E-mail and USB memory mode when the e-mail address Default Sender Set is entered manually by touching the [Address Entry] key.
Page 748 SYSTEM SETTINGS Maximum Size of E-mail Pre-Setting Mail Signature Attachments (E-mail) A signature can be automatically appended to the end of the body text of e-mail. This is convenient when it is a To prevent the transmission of excessively large image corporate policy to append a specific signature at the files by Scan to E-mail, a file size limit can be set from end of e-mail.
Page 749: I-Fax Settings
SYSTEM SETTINGS I-Fax Settings These settings can be configured when the Internet fax expansion kit is installed. (The productivity kit is required.) Transaction Report Print Select I-Fax Default Settings Setting These settings are used to configure the default settings for Internet fax. This is used to select whether or not a transaction report will be printed, and if printed, the condition for being printed.
Page 750 SYSTEM SETTINGS Activity Report Print Select Setting I-Fax Send Settings This is used to have the Image Sending Activity Report I-Fax Send Settings are described below. stored in the machine's memory automatically print at specified times. The Image Sending Activity Report can be set to I-Fax Reception Report On/Off automatically print each time the number of transactions Setting...
Page 751 SYSTEM SETTINGS Rotation Sending Setting I-Fax Receive Settings When transmitting an image that is one of the following I-Fax Receive Settings are described below. sizes, this function rotates the image counterclockwise 90 degrees. (The setting can be configured separately for each size.) Auto Receive Reduce Setting A4, B5R, A5R, 8-1/2 x 11", 5-1/2"...
Page 752 SYSTEM SETTINGS Letter Size RX Reduce Print The machine also checks the mail server (POP3 server) for received Internet faxes when the main This program is not available in Canada and Philippines. power is switched on. (Except when 0 hours 0 minutes When a letter-R (8-1/2"...
Page 753: Document Filing Settings
SYSTEM SETTINGS Document Filing Settings (The productivity kit is required.) Document filing settings are described below. Touch the [Document Filing Settings] key to configure the settings. Other Settings Default Mode Settings Default Colour Mode Settings This is used to specify which mode, Sharing or This sets the default settings for black &...
Page 754 SYSTEM SETTINGS Colour Data Compression Ratio Card Shot Settings Setting This is used to set the default original size for the card shot function. [Low], [Medium], or [High] can be selected for the default Both the X (horizontal) and Y (vertical) dimensions of the compression ratio for transmission of a stored colour file.
Page 755: Document Output Options
SYSTEM SETTINGS Document Output Options The use of a stored file can be allowed or prohibited by operation type and by the mode from which the file was stored. The items that appear will vary depending on the functions that have been added to the machine. Item Description Printer...
Page 756: List Print (Administrator)
SYSTEM SETTINGS List Print (Administrator) This is used to print lists and reports that are only for use by the administrator of the machine. Touch the [List Print (Administrator)] key to configure the settings. Administrator Settings List Lists of the administrator settings for the following modes can be printed.
Page 757: Security Settings
SYSTEM SETTINGS Security Settings The following settings are related to security. Touch the [Security Settings] key to configure the settings. SSL Settings IEEE802.1X Setting SSL can be used for data transmission over a network. IEEE802.1X can be used to authenticate a user to allow SSL is a protocol that enables the encryption of use of the machine.
Page 758 SYSTEM SETTINGS Data Clearance Settings Initialize Private Data/Data in Machine Enabling this function activates the following security functions on the machine. The system-set values can be restored to the factory (The productivity kit is required.) default state after eliminating the data stored in the machine.
Page 759: Enable/Disable Settings
SYSTEM SETTINGS Enable/Disable Settings The following settings are used to prohibit the use of certain functions. Touch the [Enable/Disable Settings] key to configure the settings. The Enable/Disable Settings control the same parameters as the enable/disable settings in other settings. The settings are linked together (changing one setting changes the other).
Page 760 Promptly contact When [Auto] is selected for paper type selection, the your dealer or nearest SHARP service department to have a service technician cancel the setting and bypass tray can be excluded from the trays that can be resolve the colour-related problem.
Page 761 SYSTEM SETTINGS Disable Registering Destination on Web Page Settings to Disable Transmission (When network connection is enabled.) These settings are used to disable the following This disables address control from the Web pages. transmission operations. • Group (Direct Entry) Disable [Resend] on Image Send Mode •...
Page 762: Change Administrator Password
SYSTEM SETTINGS Change Administrator Password This is used to change the administrator password. Touch the [Change Administrator Password] key to change the password. When changing the password, be sure to remember the new password. It is recommended that you periodically change the administrator password. Password Enter the new administrator password (5 to 32 characters).
Page 763: Data Backup
• This function cannot be used while the system settings are in use, while a job is being executed, or when there is a reserved job. • For machines for which data can be imported, contact your SHARP dealer or nearest authorised service representative. Storage Backup...
Page 764: Storing/Calling Of System Settings
SYSTEM SETTINGS Storing/Calling of System Settings The current system settings can be stored, previously stored system settings can be retrieved, and the factory default system settings can be restored. Touch the [Storing/Calling of System Settings] key to configure the settings. Restore Factory Defaults This is used to return the system settings to the factory default settings.
Page 765: Sharp Osa Settings
These settings can be used when the external account module or application communication module is available. (The productivity kit is required.) External Account Setting Job Priority Preference Set the playing speed of the animation in the Sharp OSA External Account Control application. When this setting is enabled, the machine enters The following settings can be configured.
Page 766: System Settings For Fax
SYSTEM SETTINGS SYSTEM SETTINGS FOR FAX This section explains system settings that are specifically for the fax function. The system settings for the fax function can only be configured when the facsimile expansion kit is installed. System Settings for Fax (General) List When the system settings for fax are accessed with general rights, the following items appear.
Page 767: Address Control
SYSTEM SETTINGS Address Control Address Book This section explains items specifically used for fax in "Address Control". For items that are also used for other functions, see "Address Control" (page 7-16). When the [Address Book] key is touched, the following screen appears. Address Book Back Sort Address...
Page 768 SYSTEM SETTINGS Settings Item Description General items stored Select the type of address to be stored in the address book. Address Type In this case, select [Fax]. Set a search number. The lowest available number is automatically entered. To Search Number change the number, enter a number from 0001 to 1000.
Page 769: F-Code Memory Box
SYSTEM SETTINGS F-Code Memory Box This section explains how to store memory boxes for various types of F-code communication. When the [F-Code Memory Box] key is touched, the following screen appears. System Settings F-Code Memory Box Back Add New Sort Polling Memory Box 1 Box 2...
Page 770 SYSTEM SETTINGS Settings Item Description Items common to all types Select the type of box. • Polling Memory: Store a memory box for F-code polling memory. The sub-address and passcode that you program in the memory box are necessary for the other machine to poll your machine (request transmission) using F-code communication.
Page 771: Fax Data Receive/Forward
SYSTEM SETTINGS Fax Data Receive/Forward This section explains settings for reception and forwarding. Fax Settings The following items appear when the "Fax Settings" are configured. Item Description Set the fax reception method. • Auto Reception: When a call comes in, the machine rings and then automatically begins fax reception.
Page 772: System Settings For Fax (Administrator) List
SYSTEM SETTINGS System Settings for Fax (Administrator) List When the system settings for fax are accessed with administrator rights, the following items appear. For information on the general settings, see "System Settings for Fax (General) List" (page 7-104). • For the procedure for using the system settings (administrator), see "Accessing the System Settings (Administrator)"...
Page 773 SYSTEM SETTINGS Item Factory default setting Page  Transaction Report Print Select Setting • Single Sending Print Out Error Report Only • Broadcasting Print Out All Report 7-113 • Receiving No Printed Report • Confidential Reception Print Out Notice Page ...
Page 774: Image Send Settings
SYSTEM SETTINGS Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings. Fax Settings Pause Time Setting Fax Default Settings Use this to change the length of pauses inserted in fax The fax settings can be enabled or disabled to suit the numbers.
Page 775 SYSTEM SETTINGS The Image Sending Activity Report can be set to Original Print on Transaction automatically print each time the number of transactions reaches 201, and it can also be set to automatically print Report at a specified time (once a day only). (The settings can When a transaction report is printed for a memory be simultaneously enabled.) transmission, this is used to print part of the first page of...
Page 776 SYSTEM SETTINGS Date/Own Number Print Position Fax Send Settings Setting Settings for fax transmission can be configured. This setting determines the position of the date and sender information printed at the top of faxes by the receiving Auto Reduction Sending Setting machine.
Page 777 SYSTEM SETTINGS Recall in Case of Line Busy Recall in Case of Communication Error This program is used to set the number of recall This determines how many times your machine will attempts and the interval between recall attempts when automatically re-attempt the call if a fax transmission a transmission is not successful due to the line being fails due to a communication error.
Page 778 SYSTEM SETTINGS Auto Receive Reduce Setting Fax Receive Settings When a fax is received that includes the sender's name Settings for fax reception can be configured. and number, the received image is slightly larger than the standard size. This setting is used to automatically reduce the image to fit the standard size.
Page 779 SYSTEM SETTINGS Paper Size Letter Size RX Reduce Print When a finisher is installed, select the paper used for printing of received faxes. This program is not available in Canada and Philippines. When a letter-R (8-1/2" x 11"R) size fax is received, this setting reduces the fax to A4R size.
Page 780 SYSTEM SETTINGS Fax Polling Security The following settings are for regular polling memory using the Public Box. Set Fax Polling Security When the memory polling function is used, this setting determines whether any machine will be allowed to poll your machine, or only machines that have been stored in your machine.
Page 781: System Settings Menu
SYSTEM SETTINGS SYSTEM SETTINGS MENU Job Count Device Count Total Count Clock Adjust Keyboard Select Default Settings All Custom Setting List Printer Test Page List Print (User) Document Filing Folder List Sending Address List Tray Settings Paper Type Registration Auto Tray Switching Custom Size Registration (Bypass) Paper Tray Settings Address Book...
Page 782 Release Lock on File/Folder Operation Machine Change Administrator Password Product Key Data Backup Storage Backup Device Cloning Storing/Callling of System Settings Restore Factory Defaults Store Current Configuration Restore Configuration Sharp OSA Settings External Account Setting USB Driver Settings Job Priority Preference 7-120 Contents...
Page 783 CHAPTER 8 TROUBLESHOOTING This chapter provides solutions to possible problems in a question and answer format. Locate the question that relates to your problem and use the answer to help correct the situation. If you are unable to solve a problem using this manual, please contact your dealer or nearest authorised service representative.
Page 784: Troubleshooting Problems
TROUBLESHOOTING TROUBLESHOOTING PROBLEMS The chart below shows the procedure to follow in the event a problem occurs. Use it as a troubleshooting guide. Check this chapter first You may find a solution to your problem here. Ask the administrator for help Inform the machine's administrator of the nature of the problem and ask for help.
Page 785: Frequently Asked Questions
TROUBLESHOOTING FREQUENTLY ASKED QUESTIONS Making a copy of a non-standard size original The procedure for making a copy of a payment slip or other non-standard size original is explained below. The "Centring" special mode of copy mode can be selected to position the copied image in the centre of the paper.
Page 786: I Can't Print From A Computer
SHARP DX-xxxx Checking port settings in the printer driver Display the printer driver's Properties dialog box and click the [Port] tab. SHARP DX-XXXX Do your port settings look like this? SHARP DX-XXXX Your port settings should look like this. Contents...
Page 787: Printing On An Envelope
TROUBLESHOOTING Printing on an envelope The procedure for printing on an envelope is explained below. Only the name and address side of an envelope can be printed on. It is recommended that you do a test print to check the print result before using an envelope.
Page 788: Changing The Paper Size Used For A Print Job
TROUBLESHOOTING Changing the paper size used for a print job When the size of paper specified for a print job is not loaded in any of the machine's paper trays, follow the steps below to change the paper size. Paper Empty Paper Empty 1 Check details on the job.
Page 789: Adjusting The Volume Of The Ringer
TROUBLESHOOTING Adjusting the volume of the ringer If the ringing sound made when the machine receives a fax is too loud or too soft, follow the steps below to adjust the volume. The fax ringer volume is adjusted in the system settings (administrator). Press the [SYSTEM SETTINGS] key on the touch panel, touch [Image Send Settings] - [Fax Settings] - [Fax Default Settings] -...
Page 790: Removing Misfeeds
TROUBLESHOOTING REMOVING MISFEEDS This section explains what to do when a paper misfeed occurs in the machine. Caution Fusing The fusing unit is hot. Take care not to burn yourself when removing a misfeed. unit • When removing misfed paper, do not touch or damage the transfer belt. •...
Page 791: Removing Staple Jams
TROUBLESHOOTING REMOVING STAPLE JAMS Follow the steps below to remove a staple jam. FINISHER FINISHER Open the cover. While pressing the lever over to the left, slide the finisher to the left until it stops. Gently slide the finisher until it stops. Lower the staple case release lever and remove the staple case.
Page 792 TROUBLESHOOTING Lower the lever at the front end of the staple case. Replace the staple case. Push the staple case in until it clicks into place. Slide the finisher back to the right. Gently slide the finisher back to the right until it locks into its original position.
Page 793: Problems Related To Copying Operation
TROUBLESHOOTING COPYING PROBLEMS RELATED TO COPYING OPERATION • Copying does not take place............8-11 •...
Page 794 TROUBLESHOOTING Problem Point to check Solution Image rotation does Did you select the paper size or copy Copy using automatic paper selection and automatic not take place. ratio manually? ratio selection. Are you copying using settings that do Rotate copying can generally be combined with other not allow rotate copying? special modes, however, some combinations are not possible.
Page 795: Problems Related To Copy Results
TROUBLESHOOTING PROBLEMS RELATED TO COPY RESULTS Problem Point to check Solution The image is too light Is the image too light or too dark? Select an appropriate exposure mode for the or too dark. original being copied and adjust the exposure level manually.
Page 796: Problems Related To Printing Operation
TROUBLESHOOTING PRINTING PROBLEMS RELATED TO PRINTING OPERATION • Printing does not take place............8-14 •...
Page 797 TROUBLESHOOTING Problem Point to check Solution Printing does not take Is the IP address selected correctly? Check the IP address setting. place. (Windows) If the machine does not have a permanent IP address (the machine receives an IP address from a DHCP server), printing will not be possible if the IP address changes.
Page 798 TROUBLESHOOTING Problem Point to check Solution Printing does not take Was a Notice Page printed? Check the printed Notice Page. place. A Notice Page will be printed to indicate the cause of the problem if a print job cannot be performed as specified and the cause is not shown in the display.
Page 799: Problems Related To Print Results
TROUBLESHOOTING Problem Point to check Solution Direct printing of a file Is "IPsec Settings" enabled on the Check with your administrator. in a shared folder on a machine? When "IPsec Settings" is enabled in the system settings computer is not (administrator), direct printing of a file in a shared folder possible.
Page 800 TROUBLESHOOTING Problem Point to check Solution Part of the image is Does the paper size specified by the job Make sure that the paper size setting matches the cut off. match the size of paper loaded in the size of paper loaded in the tray. tray? The paper size setting is selected as follows: Windows:...
Page 801 If this happens, take the following steps to remedy the problem. • Reduce the size of the data by lowering the data resolution, etc. • Use the Sharp Advanced Printing Language-c printer driver. Use the productivity kit for peripheral equipment. 8-19...
Page 802 TROUBLESHOOTING FACSIMILE PROBLEMS RELATED TO TRANSMISSION • Transmission does not take place........... .8-21 •...
Page 803: Problems Related To Transmission
TROUBLESHOOTING PROBLEMS RELATED TO TRANSMISSION Problem Point to check Solution Transmission does Is the telephone line connected Check the telephone line socket, the wall socket, not take place. securely? and any extension adapters to make sure that all connections are secure. SIDE AND BACK (page 1-7) Is the correct dial mode set for your...
Page 804 TROUBLESHOOTING Problem Point to check Solution Transmission does Does the job status screen (completed Perform the transmission again. not take place. jobs) or a transaction report indicate that If the transmission is still not successful after recalling is the transmission was not successful? performed as set in "Recall in Case of Line Busy"...
Page 805: Problems Related To Reception
TROUBLESHOOTING Problem Point to check Solution Transmission does Is the machine's clock set to the correct Set the clock to the correct time. ß System Settings > "Default Settings" > "Clock" > not begin at the time? specified time. "Clock Adjust" Is a transmission in progress? If another transmission is in progress when the specified time arrives, the timer operation will begin after that...
Page 806: Problems Related To Telephone
TROUBLESHOOTING Problem Point to check Solution The machine does not Has the reception mode been set to Set the reception mode to "Auto Reception". begin fax reception. "Manual Reception" in the system When the reception mode is set to "Manual Reception", settings? the machine will not receive faxes automatically.
Page 807 TROUBLESHOOTING PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL KEYS / GROUP KEYS Problem Point to check Solution A one-touch individual Has the maximum number of keys been Delete one-touch keys and group keys that are not key or group key stored? being used. cannot be stored.
Page 808: Problems Related To One-Touch Individual Keys / Group Keys
TROUBLESHOOTING SCANNING / INTERNET FAX PROBLEMS RELATED TO SCANNING / INTERNET FAX OPERATION • Transmission does not take place........... .8-26 •...
Page 809 TROUBLESHOOTING Problem Point to check Solution Transmission does Does the image file exceed the e-mail Check with your administrator. not take place. attachment limit set in the system If your administrator has set a limit on the size of settings (administrator)? transmitted files, a file that exceeds the limit cannot be transmitted.
Page 810: Problems Related To Scan Results
TROUBLESHOOTING Problem Point to check Solution The received image Does the viewer program used by the Use a software program that is capable of opening file cannot be opened. the selected file type and compression mode. recipient support the format of the The recipient may be able to open the file if you change received image data? the file type and compression mode selected at the time...
Page 811 TROUBLESHOOTING Problem Point to check Solution The quality of the Is the original printed matter such as a Use the following method to reduce the occurrence scanned image is book or magazine? of vertical patterns (moiré) poor. When the original is printed matter, vertical patterns (moiré) may occur.
Page 812 TROUBLESHOOTING Problem Point to check Solution The image is too light Is the threshold value suitable? Check the "B/W Threshold" setting. or too dark. When scanning from the TWAIN driver with [Mono 2 (When using PC gradation] selected from the [Colour Mode] of the Scan.) "Custom Settings"...
Page 813 TROUBLESHOOTING Problem Point to check Solution A one-touch individual Is the key included in a program key? Remove the key from the program and then edit or key or group key delete the key. cannot be edited or (If the key is included in multiple programs, it must be deleted.
Page 814: Problems Related To Filing
TROUBLESHOOTING DOCUMENT FILING PROBLEMS RELATED TO FILING • Document filing does not take place..........8-32 •...
Page 815: Problems Related To File Management
TROUBLESHOOTING Problem Point to check Solution A job cannot be stored Do custom folders appear in "Folder Click the [Get Folder Name] button in the document in a custom folder. Information"? filing save screen of the printer driver to call up the (When printing) custom folders that have been created on the machine.
Page 816: A File Name Is Cut Off
TROUBLESHOOTING Problem Point to check Solution A file name is cut off. Was the file name stored in the If the name was stored in the advanced transmission advanced transmission settings during a settings before Quick File or File settings were scan or Internet fax transmission? configured, that name will be used for the stored file.
Page 817 TROUBLESHOOTING GENERAL PROBLEMS PROBLEMS RELATED TO MACHINE OPERATION • Specified machine functions cannot be used..........8-37 •...
Page 818 TROUBLESHOOTING OTHER PROBLEMS • Preview images or thumbnail images do not appear........8-45 •...
Page 819: Problems Related To Machine Operation
TROUBLESHOOTING PROBLEMS RELATED TO MACHINE OPERATION Problem Point to check Solution Specified machine Have functions been disabled by the Check with your administrator. Some functions may have been disabled in the system functions cannot be administrator? settings (administrator). Check with your administrator. used.
Page 820: Printing Is Not Possible Or Stops During A Job
TROUBLESHOOTING Problem Point to check Solution Printing is not Is a tray out of paper? Add paper as instructed by the message in the possible or stops touch panel. during a job. Is the machine out of toner? Replace the toner cartridge. When toner runs low, a message will appear to inform you that the toner cartridge must be replaced.
Page 821: The Paper Misfeeds
Are multiple sheets feeding at once? Fan the paper well before loading it. Are you using paper that is not within Use SHARP-recommended paper. the specifications? Using paper that is not supported may result in misfeeds, creases, or smudges.
Page 822: Paper Does Not Feed From The Paper Tray
TROUBLESHOOTING Problem Point to check Solution The paper misfeeds. Is A5 (5-1/2" x 8-1/2") size paper When loading A5 (5-1/2" x 8-1/2") size paper, place loaded? the paper in the horizontal (A5R (5-1/2" x 8-1/2"R)) orientation. Has the correct paper size been set? If you are using a special size, be sure to specify the paper size.
Page 823: Problems Related To Quality / Print Results
1. BEFORE USING THE MACHINE "MAINTENANCE" (page 1-54) Smudges appear on Are you using paper that is not within Use SHARP-recommended paper. printed output. the specifications? Using paper that is for other models or special paper that is not supported may result in misfeeds, creases, or smudges.
Page 824: Part Of The Image Is Cut Off
TROUBLESHOOTING Problem Point to check Solution Part of the image is Has the correct paper size been set? If you are using a special size, be sure to specify the cut off. paper size. If the size of paper loaded in a tray was changed, be sure to check the paper size setting.
Page 825: Problems Related To Peripheral Devices
TROUBLESHOOTING PROBLEMS RELATED TO PERIPHERAL DEVICES Problem Point to check Solution The connected USB Is the USB device compatible with the Ask your dealer if the device is compatible with the device cannot be machine? machine. used. Is the connected USB device Use "USB-Device Check"...
Page 826: Punching Does Not Take Place
TROUBLESHOOTING Problem Point to check Solution Punching does not Does a message appear instructing you Dispose of punch scraps. take place. to check the punch module? 1. BEFORE USING THE MACHINE "PUNCH MODULE" (page 1-49) Is a different size of paper mixed in? Punching is not possible when different widths of paper are mixed together.
Page 827 TROUBLESHOOTING OTHER PROBLEMS Problem Point to check Solution Preview images or Are there a number of jobs waiting to be Wait until several of the jobs have been executed. thumbnail images do executed? not appear. The touch panel Is the display contrast properly Touch the brightness adjustment key ( ) on the screen is difficult to...
Page 828 • IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation. • Sharpdesk is a trademark of Sharp Corporation. • Sharp OSA is a trademark of Sharp Corporation. • RealVNC is a trademark of RealVNC Limited. • All other trademarks and copyrights are the property of their respective owners.
Page 829 Operation Guide MODEL: DX-2000U DX-2500N DX-2500N-GB-Z1...

Sharp DX-2500N Operation Manual

Chapter 1 Before Using the Machine

Chapter 2 Copier

Chapter 3 Printer

Chapter 4 Facsimile

Quick Links

Chapters

Related Manuals for Sharp DX-2500N

Summary of Contents for Sharp DX-2500N