Product Nameplate; Storage - CanadianSolar CSI-5K-S22002-E User Manual

3.3 Product Nameplate

The nameplate provides a unique identification of the inverter (Product type, device -specific characteristics,
certificates and approvals).
The nameplate is on the left side of the enclosure.

4 Storage

The following requirements should be met when the inverters need to be stored:
Do not unpack the inverter.
Storage temperature: –40°C ~ +70°C.
Storage humidity: 0% ~ 100%RH (Non-Condensing).
The warehouse should be clean, well-ventilated, and non-corrosive gas (corrosive or flammable gases), meanwhile
should be accessible all the time
No smoking, no illegal use of electricity and fire.
When storing inverters, do not stack more than the allowed layers to avoid damage, which number marked on the
product packaging.
Do not tilt the package or place it upside down.
Regular inspection is required during the storage.
After long periods storage, the inverters need to be inspected and tested by technical Engineer before they are put
into use.
4 / 32
FIG.3-3 Inverter Nameplate (for reference)
.
Product Name: Grid-connected PV Inverter
Model Number: CSI-5K-S22003-E
Vmax. PV(absolute max.):
MPPT Voltage Range: 100~500V dc
Max. Input Current: 15/15 A dc
Max. Short-Circuit Current: 18.8/18.8 A dc
Rated Output Power:
Max. Output Apparent Power:
Rated Apparent Power:
AC Nominal Voltage:
AC Nominal Frequency:
Max.Output Current:
Power Factor:
＞0.99(0.8 leading...0.8 lagging)
Overvoltage Class:
ll(DC), lll(AC)
Protective Class:
Topology:
Transformerless
Degree of Protection:
OperatingTemperature Range:
-25°C...+60°C
LED Indicators
Steady Green
Blinking Green
Steady Red
No DC Input
Off
More details, please refer
to the user manual.
(Scan the QR code)
624300XXXX(For Australia market)
4 Storage
600V dc
5000W
5000VA
5000VA
230V ac
50Hz
21.7A ac
Class I
IP65
5mins
Normal
Waiting
Error
it