Source Detection
Select either
or
as the method to recognize input signal.
Auto
Manual
― This menu is not available when the
MST
Key Repeat Time
Control the response rate of a button when the button is pressed.
sec, or
can be selected. If
Acceleration,
1
2 sec
when a button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•
Working: The power LED is on when the product is turned on.
•
Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
mode is selected for
DP
OUT.
is selected, a command responds only once
No Repeat
Information
View the current input source, frequency and resolution.
39