Sanyo SAP-K71GJHA Technical & Service Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Air Conditioner
  5. SAP-K71GJHA
  6. Technical & service manual

Sanyo SAP-K71GJHA Technical & Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Библиотека СОК 
TECHNICAL & SERVICE MANUAL
SAP – K71GJHA
SAP – K91GJHA
SAP – K121GJHA + SAP – C121GHA
SPLIT SYSTEM AIR CONDITIONER
Indoor Model No.
SAP – K71GJHA–S
SAP – K91GJHA–S
SAP – K121GJHA–S
+ SAP – C71GHA
+ SAP – C91GHA
Product Code No.
Destination
1 852 070 45
1 852 070 46
General (50Hz)
1 852 070 47
General (50/60Hz)
Indoor Unit
SAP – K71GJHA
SAP – K91GJHA
SAP – K121GJHA
FILE NO.
Outdoor Model No.
Product Code No.
SAP – C71GHA–S
1 852 070 66
SAP – C91GHA–S
1 852 070 67
SAP – C121GHA–S
1 852 070 68
Outdoor Unit
SAP – C71GHA
80%
SAP – C91GHA
SAP – C121GHA
REFERENCE NO.
Destination
General (50Hz)
General (50Hz)
SM
700457

Advertisement

Table of Contents
loading

Related Manuals for Sanyo SAP-K71GJHA

Summary of Contents for Sanyo SAP-K71GJHA

  • Page 1 Библиотека СОК  TECHNICAL & SERVICE MANUAL SAP – K71GJHA + SAP – C71GHA FILE NO. SAP – K91GJHA + SAP – C91GHA SAP – K121GJHA + SAP – C121GHA SPLIT SYSTEM AIR CONDITIONER Indoor Model No. Product Code No. Destination Outdoor Model No.
  • Page 3 Important! When Transporting Be careful when picking up and moving the indoor and Please Read Before Starting outdoor units. Get a partner to help, and bend your knees when lifting to reduce strain on your back. Sharp This air conditioning system meets strict safety and edges or thin aluminum fins on the air conditioner can operating standards.

  • Page 4: Table Of Contents

    Table of Contents Page 1. OPERATING RANGE ..........................1 2. SPECIFICATIONS 2-1. Unit Specifications .......................... 2 2-2. Major Component Specifications....................5 2-3. Other Component Specifications....................11 3. DIMENSIONAL DATA..........................12 4. REFRIGERANT FLOW DIAGRAM ......................15 5. PERFORMANCE DATA 5-1. Performance charts ........................16 5-2.

  • Page 5: Operating Range

    1. OPERATING RANGE Temperature Indoor Air Intake Temp. Outdoor Air Intake Temp. Maximum 32°C D.B. / 23°C W.B. 43°C D.B. Cooling Minimum 19°C D.B. / 14°C W.B. 19°C D.B. Maximum 27°C D.B. 24°C D.B. / 18°C W.B. Heating Minimum 16°C D.B. –...

  • Page 6: Specifications

    2. SPECIFICATIONS 2-1. Unit Specifications Indoor Unit SAP – K71GJHA Outdoor Unit SAP – C71GHA Power Source 220–240V Single phase 50Hz Voltage rating 220/230/240 V Performance Cooling Heating Capacity 2.05 2.05 2.05 2.50 2.50 2.55 BTU/h 7,000 7,000 7,000 8,500 8,500 8,700 Air circulation (High)
  • Page 7 Indoor Unit SAP – K91GJHA Outdoor Unit SAP – C91GHA Power Source 220–240V Single phase 50Hz Voltage rating 220/230/240 V Performance Cooling Heating Capacity 2.55 2.55 2.55 3.20 3.25 3.30 BTU/h 8,700 8,700 8,700 10,900 / 11,100 / 11,300 Air circulation (High) Moisture removal (High) Liters/h 0.85...
  • Page 8 Indoor Unit SAP – K121GJHA Outdoor Unit SAP – C121GHA Power Source 220–240V Single phase 50Hz Voltage rating 220/230/240 V Performance Cooling Heating Capacity 3.20 3.20 3.25 3.70 3.75 3.80 BTU/h 10,900 / 10,900 / 11,100 12,600 / 12,800 / 13,000 Air circulation (High) Moisture removal (High) Liters/h...

  • Page 9: Major Component Specifications

    2-2. Major Component Specifications 2-2-1. Indoor Unit Indoor Unit SAP – K71GJHA Controller PCB Part No. POW-K71GJHA Controls Microprocessor Control circuit fuse 250 V 3.15 A Remote Control Unit RCS-2HS2E Fan & Fan Motor Type Cross-flow Q'ty ... Dia. and length 1 ...
  • Page 10 Indoor Unit SAP – K91GJHA Controller PCB Part No. POW-K91GJHA Controls Microprocessor Control circuit fuse 250 V 3.15 A Remote Control Unit RCS-2HS2E Fan & Fan Motor Type Cross-flow Q'ty ... Dia. and length 1 ... ø95 / L578 Fan motor model ... Q'ty IBH-884-020 ...
  • Page 11 Indoor Unit SAP – K121GJHA Controller PCB Part No. POW-K121GJHA Controls Microprocessor Control circuit fuse 250 V 3.15 A Remote Control Unit RCS-2HS2E Fan & Fan Motor Type Cross-flow Q'ty ... Dia. and length 1 ... ø95 / L578 Fan motor model ... Q'ty IBH-884-020 ...
  • Page 12 2-2-2. Outdoor Unit Outdoor Unit SAP – C71GHA Controller PCB POW-C96GH-S Compressor Type Rotary (Hermetic) Compressor model C-1R71H5V 80688845-S Nominal output Compressor oil ... Amount 4GSD-T or SAY-56T ... 320 Ω Coil resistance (Ambient temp. 25°C) C–R : 4.57 C–S : 6.90 Safety devices Type External(OLR A)
  • Page 13 Outdoor Unit SAP – C91GHA Controller PCB POW-C96GH-S Compressor Type Rotary (Hermetic) Compressor model C-R92H5W 80692945-S Nominal output Compressor oil ... Amount 4GSD-T or SAY-56T ... 550 Ω Coil resistance (Ambient temp. 25°C) C–R : 3.07 C–S : 7.97 Safety devices Type External(OLR A) External(OLR T)
  • Page 14 Outdoor Unit SAP – C121GHA Controller PCB POW-C186GH Compressor Type Rotary (Hermetic) Compressor model C-R112H5X 80616745-S Nominal output 1,100 Compressor oil ... Amount 4GSD-T or SAY-56T ... 550 Ω Coil resistance (Ambient temp. 25°C) C–R : 1.962 C–S : 5.38 Safety devices Type External(OLR A)

  • Page 15: Other Component Specifications

    2-3. Other Component Specifications Indoor Unit SAP – K71GJHA SAP – K91GJHA SAP – K121GJHA Transformer (TR) ATR-J105 Rating Primary AC 230V, 50 / 60 Hz Secondary 19V, 0.526A Capacity 10VA Ω (at 21°C) Coil resistance Primary (WHT – WHT): 205 ±...

  • Page 16: Dimensional Data

    3. DIMENSIONAL DATA Indoor Unit SAP – K71GJHA SAP – K91GJHA SAP – K121GJHA Remote control unit 58.5 Center of tubing Drain hose ø18 hole (2 places) Narrow tube ø6.35 (1/4") Wide tube ø9.52 (3/8") K71, K91 Wide tube ø12.7 (1/2") K121 Unit : mm...
  • Page 17 Outdoor Unit SAP – C71GHA SAP – C91GHA 2 – ø12 holes Air intake Wide tube service valve ø9.52 (3/8") Air discharge Narrow tube service valve ø6.35 (1/4") Unit : mm...
  • Page 18 Outdoor Unit SAP – C121GHA 2 – ø12 holes Air intake Wide tube service valve ø12.7 (1/2") Air discharge Narrow tube service valve ø6.35 (1/4") Unit : mm...

  • Page 19: Refrigerant Flow Diagram

    4. REFRIGERANT FLOW DIAGRAM Indoor Unit SAP – K71GJHA Outdoor Unit SAP – C71GHA SAP – K91GJHA SAP – C91GHA Indoor unit Outdoor unit Accumulator Wide tube service Wide tube valve 4-way Muffler valve O.D. ø9.52 mm (3/8 ") Narrow Capillary tubes tube (both for heating...

  • Page 20: Performance Data

    5. PERFORMANCE DATA 5-1. Performance charts Indoor Unit SAP – K71GJHA Outdoor Unit SAP – C71GHA Cooling Characteristics Heating Characteristics Indoor inlet air Indoor inlet air D.B. temp. (°C) D.B. temp. (°C) –5 Outdoor inlet air D.B. temp. (°C) Outdoor inlet air D.B. temp. (°C) 3.24 (32) 1.47 (14) Indoor inlet air...
  • Page 21 Indoor Unit SAP – K91GJHA Outdoor Unit SAP – C91GHA Cooling Characteristics Heating Characteristics Indoor inlet air Indoor inlet air D.B. temp. (°C) D.B. temp. (°C) –5 Outdoor inlet air D.B. temp. (°C) Outdoor inlet air D.B. temp. (°C) 3.24 (32) 1.47 (14) Indoor inlet air Indoor inlet air...
  • Page 22 Indoor Unit SAP – K121GJHA Outdoor Unit SAP – C121GHA Cooling Characteristics Heating Characteristics Indoor inlet air Indoor inlet air D.B. temp. (°C) D.B. temp. (°C) Outdoor fan speed High –5 Outdoor inlet air D.B. temp. (°C) Outdoor inlet air D.B. temp. (°C) 3.24 (32) 1.47 (14) Indoor inlet air...

  • Page 23: Air Throw Distance Chart

    5-2. Air Throw Distance Chart Indoor Unit SAP – K71GJHA Cooling Room air temp. : 27°C Fan speed High Horizontal distance (m) : Flap angle 0° , : Axis air velocity 0° : Flap angle 30°, : Axis air velocity 30° Heating Room air temp.
  • Page 24 Indoor Unit SAP – K91GJHA Cooling Room air temp. : 27°C Fan speed High Horizontal distance (m) : Flap angle 0° , : Axis air velocity 0° : Flap angle 30°, : Axis air velocity 30° Heating Room air temp. : 20°C Fan speed High...
  • Page 25 Indoor Unit SAP – K121GJHA Cooling Room air temp. : 27°C Fan speed High Horizontal distance (m) : Flap angle 0° , : Axis air velocity 0° : Flap angle 30°, : Axis air velocity 30° Heating Room air temp. : 20°C Fan speed High...

  • Page 26: Cooling Capacity

    5-3. Cooling Capacity Indoor Unit SAP – K71GJHA Outdoor Unit SAP – C71GHA 240V Single Phase 50Hz RATING CAPACITY 2.05 kW AIR FLOW RATE 400 m EVAPORATOR CONDENSER ENT. TEMP. °C OUTDOOR AMBIENT TEMP. °C W.B. D.B. 2.07 1.98 1.89 1.80 1.69 1.55...
  • Page 27 Indoor Unit SAP – K91GJHA Outdoor Unit SAP – C91GHA 240V Single Phase 50Hz RATING CAPACITY 2.55 kW AIR FLOW RATE 430 m EVAPORATOR CONDENSER ENT. TEMP. °C OUTDOOR AMBIENT TEMP. °C W.B. D.B. 2.57 2.46 2.35 2.23 2.10 1.93 0.66 0.72 0.76...
  • Page 28 Indoor Unit SAP – K121GJHA Outdoor Unit SAP – C121GHA 240V Single Phase 50Hz RATING CAPACITY 3.25 kW AIR FLOW RATE 470 m EVAPORATOR CONDENSER ENT. TEMP. °C OUTDOOR AMBIENT TEMP. °C W.B. D.B. 2.99 2.85 2.67 2.46 1.04 1.11 1.22 1.35 1.98...

  • Page 29: Heating Capacity

    5-4. Heating Capacity –8 –5 Outdoor temperature (°C D.B.) NOTE … Point of Rating condition Black dot in the chart indicate the following rating condition. Indoor : 20°C D.B. Outdoor : 7°C D.B. / 6°C W.B. 2) Above characteristics indicate instantaneous operation, which does not take into account defrost operation.

  • Page 30: Electrical Data

    6. ELECTRICAL DATA 6-1. Electrical Characteristics Indoor Unit SAP – K71GJHA Outdoor Unit SAP – C71GHA COOLING Indoor Unit Outdoor Unit Complete Unit Fan Motor Fan Motor Compressor Performance at 220 – 240V Single phase 50Hz Rating Conditions Running Amps. 0.13 / 0.14 0.24 / 0.25...
  • Page 31 Indoor Unit SAP – K91GJHA Outdoor Unit SAP – C91GHA COOLING Indoor Unit Outdoor Unit Complete Unit Fan Motor Fan Motor Compressor Performance at 220 – 240V Single phase 50Hz Rating Conditions Running Amps. 0.17 / 0.18 0.24 / 0.25 3.89 / 3.87 Power Input...
  • Page 32 Indoor Unit SAP – K121GJHA Outdoor Unit SAP – C121GHA COOLING Indoor Unit Outdoor Unit Complete Unit Fan Motor Fan Motor Compressor Performance at 220 – 240V Single phase 50Hz Rating Conditions Running Amps. 0.17 / 0.18 0.24 / 0.25 5.39 / 5.47 Power Input...

  • Page 33: Electric Wiring Diagram

    6-2. Electric Wiring Diagrams To avoid electrical shock hazard, be sure to Indoor Unit SAP – K71GJHA SAP – K91GJHA disconnect power before checking, servicing WARNING SAP – K121GJHA and/or cleaning any electrical parts.
  • Page 34 To avoid electrical shock hazard, be sure to Outdoor Unit SAP – C71GHA SAP – C91GHA disconnect power before checking, servicing WARNING and/or cleaning any electrical parts.
  • Page 35 To avoid electrical shock hazard, be sure to Outdoor Unit SAP – C121GHA disconnect power before checking, servicing WARNING and/or cleaning any electrical parts.

  • Page 36: Installation Instructions

              7. INSTALLATION INSTRUCTIONS 7-1. Installation Site Selection Wall-mounted Type Indoor Unit 5 cm min. To prevent abnormal heat 5 cm 5 cm min. generation and the possibility min. WARNING INDOOR UNIT of fire, don’t place obstacles, enclosures and grills in front of or surrounding the air...
  • Page 37 Outdoor Unit AVOID: heat sources, exhaust fans, etc. (Fig. 3) damp, humid or uneven locations. Exhaust fan Hot air Heat source choose a place as cool as possible. Outdoor unit choose a place that is well ventilated. allow enough room around the unit for air intake/exhaust and possible maintenance.

  • Page 38: Remote Control Unit Installation Position

    7-2. Remote Control Unit Installation Position The remote control unit can be operated from either a non-fixed position or a wall-mounted position. To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places: In direct sunlight Behind a curtain or other place where it is covered More than 8 m away from the air conditioner...

  • Page 39: Recommended Wire Length And Diameter

    7-3. Recommended Wire Length and Diameter Regulations on wiring diameter differ from locality to NOTE locality. For field wiring requirements, please refer to Refer to the WIRING SYSTEM DIAGRAM for the your local electrical codes. Carefully observe these meaning of "A" and "B" in Table 2. regulations when carrying out the installation.

  • Page 40: Function

    8. FUNCTION 8-1. Room Temperature Control Cooling Room temperature control is obtained by cycling the compressor ON and OFF under control of the room temperature sensor in the remote control unit. The room temperature (and other information) is transmitted every 3 minutes by the remote control unit to the controller in the indoor unit.
  • Page 41 Heating Room temperature control is obtained by cycling the compressor ON and OFF under control of the room temperature sensor in the remote control unit. The room temperature (and other information) is transmitted every 3 minutes by the remote control unit to the controller in the indoor unit.

  • Page 42: Dry Operation

    8-2. Dry Operation (Dehumidification) Dry operation uses the ability of the cooling cycle to remove moisture from the air, but by running at low level to dehumidify without greatly reducing the room temperature. The air conditioner repeats the cycle of turning ON and OFF automatically as shown in the chart below according to the room temperature.

  • Page 43: Freeze Prevention

    8-4. Freeze Prevention (Cooling) This function prevents freezing of the indoor heat exchange coil. When the compressor has been running for 10 minutes or more and the temperature of the indoor heat exchange coil falls below –1°C, the control circuit stops the compressor for at least 6 minutes. The compressor does not start again until the temperature rises above 8°C or 6 minutes has elapsed.

  • Page 44: Overload Prevention

    8-5. Overload Prevention (Heating) This function prevents overheating of the indoor heat exchange coil. When the temperature of the indoor heat exchange coil rises above 54°C, and if the indoor fan is L (low speed), then the fan speed changes from L (low speed) to M (medium speed). When the temperature of the indoor heat exchange coil rises above 57°C, the outdoor fan stops.

  • Page 45: Cold Draft Prevention

    8-6. Cold Draft Prevention (Heating) This function controls indoor fan speed so a strong draft of cold air will not blow out before the indoor heat exchange coil have sufficiently warmed up. STANDBY lamp on front of the indoor unit lights up when this function is working. when 10 minutes has elapsed,the fan speed is automatically switched to set speed regardless of indoor heat exchange coil temperature.

  • Page 46: Defrosting Operation

    8-7. Defrosting Operation (Heating) Defrosting Flowchart Compressor ON Release of overload prevention (Outdoor fan operates.) Overload prevention works. Does outdoor fan stop? Outdoor fan is either operated Indoor heat exchanger coil Integrated operating time of Integrated operating time of or stopped for more than 10 temperature drops 0.8°C per compressor is more than 3 compressor is more than 1.5...

  • Page 47: Outdoor Fan Speed Control

    Defrosting Mode Timing Chart Start of defrosting Release of defrosting 32 seconds 11 minutes 32 seconds Compressor Outdoor fan 2 seconds 2 seconds Solenoid coil (4–way valve) Indoor fan Set speed Set speed Standby lamp Indoor heat exch. coil temp. 34 °C Release of cold draft prevention NOTE...

  • Page 48: Troubleshooting

    9. TROUBLESHOOTING 9-1. Check before and after troubleshooting WARNING Hazardous voltage can cause ELECTRIC SHOCK or DEATH. Disconnect power or turn off circuit breaker before you start checking or servicing. 9-1-1. Check power supply wiring. Check that power supply wires are correctly connected to terminals No.8 and No.9 on the terminal plate in the outdoor unit.

  • Page 49: Air Conditioner Does Not Operate

    9-2. Air conditioner does not operate. 9-2-1. Circuit breaker trips (or fuse blows). A. When the circuit breaker is set to ON, it is tripped soon. (Resetting is not possible.) There is a possibility of ground fault. Check insulation resistance. If resistance value is 2MΩ...
  • Page 50 B. Circuit breaker trips in several minutes after turning the air conditioner on. There is a possibility of short circuit. • Check capacity of circuit breaker. Replace with suitable one (larger capacity). Capacity of circuit breaker is suitable. In case of Heating operation : Measure resistance of outdoor fan •...
  • Page 51 C. Check remote control unit. • Try to run with another remote control unit. First remote control unit is defective. • Check for residue buildup on Clean transmitter. transmitter of remote control unit. • Check for residue buildup on remote Clean receiver.
  • Page 52 9-2-3. Only outdoor unit does not run. A. Check setting temperature. Is room temperature too low ? Is room temperature too high ? Try to lower setting temperature by Try to raise setting temperature by temperature setting button ( button). temperature setting button ( button).

  • Page 53: Some Part Of Air Conditioner Does Not Operate

    9-3. Some part of air conditioner does not operate. 9-3-1. Only indoor fan does not run. • Check fan casing Remove foreign foreign matter on matter or repair. Fan cannot inside. be turned. • Check fan rotation. Turn fan gently once or twice by hand.
  • Page 54 9-3-4. Only outdoor fan does not run. • Check fan casing Remove foreign foreign matter on matter or repair. Fan cannot inside. be turned. • Check fan rotation. Turn fan gently once or twice by hand. Fan motor burnout or foreign matter in Repair or replace.

  • Page 55: Air Conditioner Operates, But Abnormalities Are Observed

    9-4. Air conditioner operates, but abnormalities are observed. 9-4-1. Operation does not switch from HEAT to COOL (or COOL to HEAT). • Remote control unit may be defective. Receiver in switch Ass'y may be defective. • Measure resistance of 4–way valve's winding.
  • Page 56 9-4-2. Poor cooling or heating. • Check position of remote control unit. Change position of remote • Cool air from air conditioner reaches control unit. position directly. • Wide and narrow tubes between Insulate both wide and narrow indoor unit and outdoor unit are tubes separately and then insulated.

  • Page 57: If A Sensor Is Defective

    9-5. If a sensor is defective. 9-5-1. Indoor coil temp. thermistor (TH1) is defective. • Operation lamp on front side of • Thermistor (TH1 ) is defective. indoor unit is flashing on and off. (*) (That is, sensor is SHORT.) •...

  • Page 58: Checking Electrical Components

    10. CHECKING ELECTRICAL COMPONENTS 10-1. Measurement of Insulation Ground wire Resistance Clip The insulation is in good condition if the resistance exceeds 2MΩ. Probe 10-1-1. Power Supply Wires Insulation tester Fig. 1 Clamp the ground wire of the power supply wires with the lead clip of the insulation resistance tester and Terminal plate measure the resistance by placing a probe on either of...

  • Page 59: Checking Continuity Of Fuse On Pcb Ass'y

    10-2. Checking Continuity of Fuse on PCB Ass'y Fuse Remove the PCB Ass’y from the electrical component box. Then pull out the fuse from the PCB Ass’y. (Fig. 5) PCB Ass’y Check for continuity using a multimeter as shown in Fig.

  • Page 60: Maintenance

    11. MAINTENANCE 11-1. Changing Address of Remote Control Unit in Indoor Unit If you are installing more than 1 indoor unit (up to 2) in the same room, it is necessary for you to assign each unit its own address, so each can be operated by its own separate remote control unit. You assign the addresses by matching the remocon address on the PCB of each indoor unit with the switch positions of its remote control unit.

  • Page 61: Appendix Instruction Manual

    APPENDIX INSTRUCTION MANUAL SAP – K71GJHA + SAP – C71GHA SAP – K91GJHA + SAP – C91GHA SAP – K121GJHA + SAP – C121GHA...
  • Page 62 Features This air conditioner is equipped with cooling, heating, and drying functions. Details on these functions are provided below; refer to these descriptions when using the air conditioner. Compact Size Air Sweep Control • • This model is smaller than its predecessors This function moves a flap up and down in the and yet offers the same capabilities.
  • Page 63 Contents Page Features......................2 Product Information ..................3 Alert Symbols ....................3 Installation Location..................4 Electrical Requirements .................. 4 Safety Instructions ..................4 Names of Parts ....................5 Using the Remote Control Unit ..............10 Operation with the Remote Control Unit ........... 12 1.

  • Page 64: Installation Location

    Installation Location We recommend that this air conditioner be installed properly by • qualified installation technicians in accordance with the Installation Instructions provided with the unit. Before installation, check that the voltage of the electric supply in • your home or office is the same as the voltage shown on the nameplate.

  • Page 65: Names Of Parts

    Names of Parts Air intakes INDOOR UNIT Air outlet Remote control unit Drain hose Refrigerant tubes OUTDOOR UNIT Air outlet This illustration is based on the external appearance of a standard NOTE model. Consequently, the shape may differ from that of the air conditioner you have selected.
  • Page 66 Unit Display and Operation Selector Operation selector INDOOR UNIT IMPORTANT Remote control receiver Avoid using radio equipment such as mobile phone near (within 1 m of) the indoor unit. Some radio equipment may cause the unit to malfunction. If the trouble occurs, dis- OPERATION lamp connect power and restart the air conditioner after a few...
  • Page 67 Remote Control Unit (Display) Displayed when setting temperature Displayed when transmitting data Displayed when temperature is shown Displayed when the temperature setting is at the upper or lower allowable limit Displayed when setting timer Symbols (1) Operation mode (3) Set temperature 16–30°C When set to 28°C ....
  • Page 68 Remote Control Unit Transmitter Display (Cover closed) ON/OFF operation button 1 HR. TIMER button Temperature setting buttons (TEMP.) NIGHT SETBACK button MODE selector button FAN SPEED selector button FLAP button TIMER SET button (which advances the time displayed) TIMER ON button ADDRESS switch TIMER OFF button ACL button...
  • Page 69 Change the address switch to prevent mixing of signals from • remote control units when two Sanyo air conditioners are installed next to each other. Normally, the address switch is set to A. When switching the address, the remote control must be changed, and the jumper cables on the indoor unit board must be cut.

  • Page 70: Using The Remote Control Unit

    Using the Remote Control Unit How to Install Batteries 1. Slide the cover in the direction indicated by the arrow and remove it. 2. Install two AAA alkaline batteries. Make sure the batteries point in the direction marked in the battery compartment. 3.
  • Page 71 Using the Remote Control Unit (continued) Mounting the Remote Control Unit Truss-head tapping screws 4 x 16 mm (supplied) Press Remote control unit holder Hook When attaching to wall 1) Confirm the indoor unit beeps when the ON/OFF button is pressed at the wall location where the remote control unit is to be attached, then attach the holder to the wall.

  • Page 72: Operation With The Remote Control Unit

    Operation with the Remote Control Unit 1. Automatic Operation STEP 2 STEP 1 Check that the circuit breaker on the power panel is turned on and that NOTE the operation selector of the indoor unit is in the ON position. Once mode is selected and the unit is preset by following the steps below, you can have the air conditioner automatically bring the room to...

  • Page 73: Manual Operation

    Operation with the Remote Control Unit (continued) 2. Manual Operation STEP 2 STEP 3 STEP 1 STEP 5 STEP 4 Check that the circuit breaker on the power panel is turned on and that NOTE the operation selector of the indoor unit is in the ON position. If the automatic operation settings of the unit do not meet your needs, press the setting buttons as described below and change the settings as desired.

  • Page 74: Adjusting The Fan Speed

    Operation with the Remote Control Unit (continued) This appliance has a built-in 3-minute time delay circuit to ensure • NOTE reliable operation. When the operation button is pressed, the compressor will start running within three minutes. In the event of power failure, the unit will stop.

  • Page 75: Night Setback Mode

    Operation with the Remote Control Unit (continued) 4. Night Setback Mode Night Setback Mode is used for saving energy. Press the NIGHT SETBACK button while operation. mark appears in the display. To release the night setback function, press the NIGHT SETBACK button again.
  • Page 76 Operation with the Remote Control Unit (continued) B. In Heating Mode: When the night setback mode is selected, the air conditioner automatically lowers the temperature setting 2°C when 30 minutes have passed after the selection was made, and then another 2°C after another 30 minutes have passed, regardless of the indoor temperature when night setback was selected.

  • Page 77: Special Remarks

    Special Remarks ‘‘DRY’’ ( ) Operation How it works? Once the room temperature reaches the level that was set, the unit • repeats the cycle of turning on and off automatically. During DRY operation, the fan speed is automatically set to LOW or •...

  • Page 78: Using The 12-Hour On And Off Timer

    Using the 12-Hour ON and OFF Timer 1. TIMER ON mode After the length of time set for TIMER ON elapses, the unit begins operating. (Example) The display depicted at left indicates that the air conditioner will begin operating in three hours. Setting procedure: STEP 1 Press the MODE button and set the desired operation...
  • Page 79 Using the 12-Hour ON and OFF Timer (continued) 3. ON/OFF Program Timer A combination of the TIMER ON and TIMER OFF modes, this function allows you to specify the time that the unit turns on and the time when it turns off. (Example) The unit will turn on three hours from now, and turn off five hours from now.

  • Page 80: Using The 1-Hour Off Timer

    Using the 1-Hour OFF Timer 1. 1-Hour OFF Timer This function causes the unit to operate for one hour and then stop, regardless of whether the unit is on or off when this button is pressed. indicator in the display indicates that this function is operating. Setting procedure: Regardless of whether the unit is operating or stopped, press the 1 HR.

  • Page 81: Adjusting The Airflow Direction

    Adjusting the Airflow Direction 1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right. When the humidity is high, the vertical vanes should be in the front CAUTION position during the cooling or dehumidifying operation. If the vertical vanes are positioned all of the way to the right or left, condensation may begin to form around the air vent and drip down.

  • Page 82: Operation Without The Remote Control Unit

    Operation without the Remote Control Unit INDOOR UNIT If you have lost the remote control unit or it is not working properly, follow the steps below. 1. When the air conditioner is not running If you want to turn on the air conditioner, switch the operation selector to the OFF position, and then to the ON position.
  • Page 83 Care and Cleaning (continued) Anti-Mold Filter The anti-mold filter behind the air intake grille should be checked and cleaned at least once every two weeks. How to remove the 1. Grasp both ends of Air intake grille anti-mold filter the air intake grille and pull it out and 2.
  • Page 84 Care and Cleaning (continued) Air Cleaning Filter The air cleaning filter removes dust and dirt from the air, and reduces (not provided) odors and smoke from tobacco. The air cleaning filter is not provided with the air conditioner and must NOTE be purchased separately.

  • Page 85: Troubleshooting

    Troubleshooting If your air conditioner does not work properly, first check the following points before requesting service. If it still does not work properly, contact your dealer or service center. Trouble Possible Cause Remedy Air conditioner does not 1. Power failure. 1.
  • Page 86 SANYO Electric Co.,Ltd. Osaka, Japan 700457 10/00/200 Printed in Japan...

This manual is also suitable for:

Sap-c71ghaSap-k91gjhaSap-c91ghaSap-k121gjhaSap-c121gha

Table of Contents