Table of Contents
Advertisement
IR control
Select the operation mode of the remote control when multiple
displays are connected via an RS232C connection.
•
{Normal} - All displays can be operated normally by the remote
control unit.
•
{Primary} - Designate this display as the primary display for
remote control operation. Only this display can be operated by the
remote control. (In primary mode, IR key will always be processed
regardless the monitor id/group settings).
•
{Secondary} - Designate this display as the secondary display. This
display can not be operated by the remote control, and will only
receive the control signal from the primary display via the RS232C
connection.
{Lock All} / {Lock all but Volume} / {Lock all but Power} / {Lock
•
all except PWR & VOL}- Lock the remote control function of this
display. To unlock, press and hold the [
remote control for 6 (six) seconds.
Keyboard control
Choose to enable or disable the display keyboard (control buttons)
function.
•
{Unlock} - Enable the keyboard function.
{Lock All} / {Lock all but Volume} / {Lock all but Power} / {Lock all
•
except PWR & VOL} - Disable the keyboard function.
NOTE:
"Keyboard Control Lock Mode" This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both [ ]
and [ ] buttons and hold down continuously for more than 3
seconds.
Tiling
With this function you can create a single large-screen matrix (video
wall) that consists of up to 225 sets of this display (up to 15-sets on the
vertical and 15-sets on the horizontal sides). This function requires a
daisy-chain connection.
Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
H monitors
1
3
] INFO button on the
2
Position
4
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
1
2
6
7
11
12
16
17
21
22
{Switch on delay} - Set the power-on delaying time (in seconds).
•
The default option {Auto} allows a sequential powering-on for each
display by their ID number when multiple displays are connected.
The options are: {Off/Auto/2-255}
•
Brightness: {Normal}/{ACS}
{Normal}: Apply OSD brightness value (backlight)
{ACS}: Apply brightness value (backlight) which is adjusted by MIC
tool. The default value before adjustment is the same as OSD
brightness value, e.g., 70)
Some brightness (backlight) settings cannot be adjusted by OSD.
Please refer to Picture Menu Backlight setting priority.
Type: {Off}/{SW Tool}/{OSD Only}
•
•
{Enable} - Choose to enable or disable the Tiling function. If enabled,
the display will apply the settings in {H monitors}, {V monitors},
{Position}, and {Frame comp.}.
•
{H monitors} - Select the number of displays on the horizontal side.
•
{V monitors} - Select the number of displays on the vertical side.
•
{Position} - Select the position of this display in the screen matrix.
•
{Frame comp.} - Choose to turn the frame compensation
function on or off. If selected {Yes}, the display will adjust the image
to compensate for the width of the display bezels in order to
accurately display the imag
Frame compensation - Yes
53
H monitors
3
4
5
8
9
10
13
14
15
18
19
20
23
24
25
Position
Advertisement
Table of Contents
Troubleshooting
