Add New Channels
You can add any new channels found automatically to the channel list.
1. The signal condition is displayed and press
If you select
Any Satellite
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the
Signal Lock
●
the search cannot be executed.
If the status is shown as
●
have no indications, please check the dish alignment.
2. Select a search mode and press
New channels can only be added to the existing channel list from the
●
same satellite.
OK
in
Auto
Setup, this step is skipped.
status is shown as Locked. If it is not locked,
Not locked
and
Signal Quality
OK
to start
Add New
- 148 -
to access.
/
Signal Strength
Channels.