Test For The Drainage System - Cooper & Hunter CHML-ID09RK Installation And Operation Manual

Free match series r32 multi vfr system-indoor unit

Hide thumbs Also See for CHML-ID09RK:

Table of Contents

Available languages

Notes:

①.The inclination height of the drain hose should be within 75mm so that the outlet

of the drain hose does not suffer the external force.

②.If multiple drain pipes converge, please follow the installation steps below.

12 Test for the Drainage System

a. After the electric installation, please take a test for the drainage system.

b. During the test, check if the water flow goes through the pipe correctly and

observe carefully the joint to see if it leaks or not. If this unit is installed in the newly built

house, it is suggested to take this test prior to the ceiling decoration.

Unitary Duct Split Unitary Duct Split

Fig.16

Fig.17

Table of Contents

Table of Contents

Do you have a question about the CHML-ID09RK and is the answer not in the manual?

Chml-id12rk Chml-id18rk Chml-id21rk Chml-id24rk