Username And Password - OpenEye OE-C3012T4-S User Manual

USERNAME AND PASSWORD

*OpenEye IP cameras ship without a default password.
Username: admin
The admin user password can be set using the following methods:
1. OpenEye recorders running Apex 2.6 or newer will automatically set a new unique password
when added in setup, if a new password has not already been set.
Note
2. Connect to the camera directly through a Web Browser and follow the onscreen prompts.
3. Use the Network Camera Manager (NCM) Utility.
Note The NCM Software Manual can be found at
Note Refer to your Apex recorder manual or quick start guide for instruction on adding cameras.
37822AB
You can set your Default Camera Password under the General Settings page within
Setup > System Settings > General Settings. For instructions on defining your unique
camera password, visit:
https://www.openeye.net/support/faqs/default-camera-password
Network Camera Manager
13