Kenmore KH-7E01-SSTP Use & Care Manual page 19

ASSEMBLY & INSTALLATION INSTRUCTION (TRIPOD MOUNTED ) L-Shaped Bracket Installation
I-Shaped Bracket Installation
1
 Fasten the I-shaped bracket (E) to the back of the heater using 2 pieces of M6mm nuts (F),
tighten them with a wrench.
Tripod Installation
2
 After extending the tripod to it's full height, secure the tripod with a wing nut (A), plastic curved
washer (D), and PM6mm x 44mm machine screw (C).
M6mm Nut
Qty: 2 pcs
Wing Nut
Qty: 1 pc
PM6mm x 44mm Machine Screw
Qty: 1 pc
Plastic Curved Washer
Qty: 1 pc
19