Related Manuals for Black & Decker EM031M2CE
Summary of Contents for Black & Decker EM031M2CE
- Page 1 Countertop Microwave Oven Instruction Manual MODEL NUMBER EM031M2CE Thank you for choosing BLACK+DECKER PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON Customer Care Line USA 1-800-842-1289...
-
Page 3: Table Of Contents
Tables of Contents PRECAUTIONS ..............3 SPECIFICATIONS ..............3 SAFETY ................4 GROUNDING ............... 7 UTENSILS ................10 SETTING UP YOUR OVEN ..........13 CONTROL PANEL .............. 15 OPERATION ............... 16 MAINTENANCE ..............22 ONE YEAR LIMITED WARRANTY ........23... -
Page 4: Precautions
(2). HINGES AND LATCHES (broken or loosened) (3). DOOR SEALS AND SEALING SURFACES (d).The oven should not be adjusted or repaired by anyone except properly qualified service personnel. SPECIFICATIONS Model: EM031M2CE Rated Voltage: 120V~60Hz Rated Input Power (Microwave): 1500W Rated Output Power (Microwave):... - Page 5 IMPORTANT SAFETY INSTRUCTIONS WARNING ： When using electrical appliances basic safety precautions should be followed, including the following. To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy. 1. Read all instructions before using the appliance. 2.
- Page 6 9. This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment. 10. Do not cover or block any openings on the appliance. 11. Do not store this appliance outdoors. Do not use this product near water - for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location.
- Page 7 present. THIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A UTENSIL IS INSERTED INTO THE LIQUID. To reduce the risk of injury to persons: (1). Do not overheat the liquid. (2). Stir the liquid both before and halfway through heating (3).
-
Page 8: Grounding
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. - Page 9 2. Longer cord sets or extension cords are available and may be used if care is exercised in their use. 3. If a long cord or extension cord is used: (1). The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.
- Page 10 RADIO INTERFERENCE 1. Operation of the microwave oven may cause interference to your radio, TV or similar equipment. 2. When there is interference, it may be reduced or eliminated by taking the following measures: (1). Clean door and sealing surface of the oven. (2).
-
Page 11: Utensils
UTENSILS Tightly-closed utensils could explode. Closed containers should be opened and plastic pouches should be pierced before cooking. See the instructions on "Materials you can use in microwave oven or to be avoided in microwave oven." There may be certain non-metallic utensils that are not safe to use for microwaving. - Page 12 MATERIALS TO AVOID IN MICROWAVE OVEN Utensils Remarks Aluminum tray May cause arcing. Transfer food into microwave-safe dish. Food carton with metal handle May cause arcing. Transfer food into microwave-safe dish. Metal shields the food from microwave energy. Metal Metal or metal-trimmed utensils trim may cause arcing.
- Page 13 MATERIALS YOU CAN USE IN MICROWAVE OVEN Utensils Remarks Follow manufacturer* instructions. The bottom of browning dish must be at Browning dish least 3/16 inch (5mm) above the turntable. Incorrect usage may cause the turntable to break. Microwave-safe only. Follow manufacturer’s instructions. Do not use Dinnerware cracked or chipped dishes.
-
Page 14: Setting Up Your Oven
SETTING UP OUR OVEN Names of Oven Parts and Accessories Remove the oven and all materials from the carton and oven cavity. Your oven comes with the following accessories. Glass tray (turntable) Turntable ring assembly Instruction manual Express Cook CANCEL A) Control panel E) Observation window B) Turntable shaft... - Page 15 Countertop Installation Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron.
-
Page 16: Control Panel
CONTROL PANEL (12) 1. Time Cook 2. Time Defrost 3. Power (11 power levels) 4. Clock 5. Auto Cook Menu (Popcorn, Potato, Pizza, Frozen Vegetable, Beverage, Dinner Plate) 6. Weight Defrost 7. Kitchen Timer 8. Number Pad (0-9) Express Cook (Number Pad 1-6) 9.Turning off the buzzer Express Cook 10.Stop/CANCEL (Before cooking... -
Page 17: Operation
OPERATION 1. POWER LEVEL 11 Power levels are available Level 100% Power Display PL10 2. CLOCK SETTING (1) Press “Clock", “00:00” will display. (2) Press the number keys and enter the current time. For example, time is 10:12 now, please press “1, 0, 1, 2” in turn. (3) Press “Clock“... - Page 18 4. MICROWAVE COOK (1) Press "Time Cook" once, the screen will display "00:00". (2) Press number keys to input the cooking time; the maximum cooking time is 99 minutes and 99 seconds. (3) Press "Power " once, the screen will display "PL10". The default power is 100% power. Now you can press number keys to adjust the power level.
- Page 19 8. TIME DEFROST FUNCTION (1) Press "Time Defrost", the screen will display "dEF2". (2) Press numerical buttons to input time to be defrosted. Input the time ranging between 0:01~99:99. (3) Press "START/+30SEC." to start defrosting. The default microwave power is PL3. The power cannot be adjusted.
- Page 20 14. DINNER PLATE (1) Press “Dinner Plate“ repeatedly until the number you wish appears in the display, “9.0 - ”, ”12.0 - ”, ”18.0 - ” oz will display in order. (2) For example, press “Dinner Plate” once, “9.0 - ” appears. (3) Press "START/+30SEC."...
- Page 21 17. INQUIRING FUNCTION In the microwave cooking mode, press “Power“ to inquire microwave power level, and the current microwave power will be displayed. After 3 seconds the microwave will return to its previous mode. The same method can be used to find power in the multi-mode cooking mode.
- Page 22 23. TURNTABLE RESET FUNCTION When cooking finished, if the turntable is not at the initial position, it will enter the turntable reset function. At this time, the lamp, fan and turntable are working, " " will dynamic display. After the turntable has reset, the oven stops cooking and reminds cooking is finished.
-
Page 23: Maintenance
MAINTENANCE Troubleshooting Check your problem by using the chart below and try the solutions for each problem. If the microwave oven still does not work properly, contact the nearest authorized service center Trouble Possible Cause Possible Remedy a. Electrical cord for oven is not plugged in. a. -
Page 24: One Year Limited Warranty
ONE YEAR LIMITED WARRANTY This product carries a warranty stating that it will be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable.
Need help?
Do you have a question about the EM031M2CE and is the answer not in the manual?
Questions and answers
How do I turn off the done signal
To turn off the done signal (buzzer) on the Black & Decker EM031M2CE, press and hold the number 8 button on the control panel for three seconds. A long beep will sound, indicating that the buzzer is turned off.
This answer is automatically generated
The glass truntable does not seat into the drive gear below and freely spins with my finger
The glass turntable on the Black & Decker EM031M2CE may not seat into the drive gear and spin freely due to the following reasons:
1. Incorrect Placement – The glass tray must be positioned correctly on the turntable shaft and turntable ring assembly. It should not be placed upside down.
2. Missing or Damaged Parts – Both the glass tray and turntable ring assembly must be in place for proper operation. If either is missing or cracked, the turntable may not function properly.
3. Obstructions – Any food debris or foreign objects between the turntable and the turntable shaft may prevent proper seating and rotation.
4. Damaged Turntable Shaft or Drive Mechanism – If the turntable shaft or drive mechanism is damaged, the turntable may not engage properly and could spin freely.
Ensuring all components are correctly installed and free from damage should help resolve the issue.
This answer is automatically generated
I have B & D microwave EM031M2CE… trying to reset time due to daylight savings time. Instructions online say to press clock button for it to go back to 0000. Then punch in the time and hit clock button again. My microwave doesn’t have a button that says just clock. Mine says timer/clock. If I try to use that button, I can never get it to change the time when I hit it the second time it doesn’t do anything. Then, if I hit start the timer starts running I would really like to be able to change the time thank you. I tried to take a picture of it and use the photo, but it just keeps putting it up there with the red in it and it won’t post
To reset the time on a Black & Decker microwave EM031M2CE, follow these steps:
1. Press the "Kitchen Timer" button once. The screen will display "00:00."
2. Enter the correct time using the number keys.
3. Press "START/+30SEC." to confirm the setting.
If the clock needs to be reset, repeat these steps.
This answer is automatically generated
STANDBY MODE AND TURN BUZZER OFF
To turn off standby mode on the Black & Decker EM031M2CE, press the “STOP/Cancel” button once (for less than 3 seconds) while in standby mode or child-lock mode. This activates energy saving mode, turning off the LED display. Ensure the door is closed.
To turn off the buzzer, press and hold the number 8 button on the control panel for three seconds in standby mode. A long beep will sound, and the buzzer will be turned off.
This answer is automatically generated
WHAT IS STANDBY AND TURN OFF BUZZER OFFER
In standby mode, if the clock is set, the display shows the current time with a flashing colon; otherwise, it shows "0:00". To turn off the buzzer, press and hold the number 8 on the control panel for three seconds in standby mode. A long beep confirms the buzzer is off. To turn it back on, repeat the same step.
This answer is automatically generated