Setting The Department Id And Pin For The Administrator - Canon imageCLASS LBP122dw User Manual

Setting the Department ID and PIN for the
Administrator
Set the System Manager ID and System Manager PIN to create an administrator account.
By creating an administrator account, only those users who know these credentials can log in to System Manager
Mode to view and change important settings.
This section describes how to configure the settings using the operation panel.
You can also configure the settings using Remote UI from a computer after the System Manager ID and PIN have been
set on the machine. Managing the Machine from a Computer (Remote UI)(P. 178)
Administrator privileges are required.
1
On the operation panel, select [Menu] in the [Home] screen, and press
Screen(P. 81)
2
Press [Management Settings]
Information Settings]
➠
The [Sys. Manager Info Set.] screen is displayed.
If the login screen appears, enter the currently set System Manager ID and PIN, and then press
3
Press [System Manager ID and PIN]
Specify any number. You cannot set a System Manager ID consisting of all zeros, such as "00" or "0000000."
4
Enter the System Manager PIN, and press
Specify any number other than "7654321." You cannot set a PIN consisting of all zeros, such as "00" or
"0000000."
5
Enter the PIN again, and press
➠
The settings are applied.
● Do not forget the System Manager ID and PIN. If you forget your System Manager ID and PIN, contact your
dealer or service representative.
Setting the System Manager Information
● On the [Sys. Manager Info Set.] screen, press [System Manager Name] to set the name of the system
manager.
● You can also configure the e-mail address and other system manager information by using Remote UI from
a computer.
Security
System Manager ID and PIN(P. 4)
[User Management]
.
enter the System Manager ID
.
If the Problem Persists(P. 339)
144
.
94RC-04S
. [Home]
[System Manager
.
.