Beachwaver BLOW BRUSH User Manual

BLOW BRUSH™
USER GUIDE

OPERATION

USER MAINTENANCE

STOR AGE

HOW TO USE

To Place On: Line arrows up and press attachment down
until it clicks into place.
To Remove: Turn off and allow to cool. Hold down the unlock
button and remove the attachment while wearing the glove.
WARR ANT Y
At The Beachwaver Co.™ we want you to be thrilled with our tools. We want
you to look and feel beautiful. We believe in the quality of our tools and test
each iron thoroughly. We welcome your feedback and in the event of any
problem, we welcome the opportunity to make it right!
The Beachwaver Co. ™ will replace your tool for one year from the date of
purchase if the product is defective in materials or workmanship. In no event
shall The Beachwaver® Co. be liable for any special, incidental or consequen-
tial damages for breach of this or any other warranty, express or implied,
whatsoever. Any implied warranties, obligations or liabilities, including but not
limited to the implied warranty of merchantability and fitness for a particular
purpose shall be limited in duration to the one year duration of this written
limited warranty. The warranty does not apply in the following scenarios: any
unauthorized party opened the product in attempt to fix the product, normal
wear and tear, purchasing from an unauthorized seller, damage caused by
misuse or mishan-dling, or due to user's failure. Warranty application is
determined in the sole discretion of The Beachwaver® Co.
PLEASE REGISTER YOUR TOOL FOR WARRANTY!
Blow Brush : 125V ~ 60Hz 900W
TO TURN ON:
Turn Control Ring located near cord and select
wind speed or cool blast.
TO TURN OFF:
Turn Control Ring left and align to the "O" position.
CARING FOR YOUR BLOW BRUSH
The Blow Brush is virtually maintenance-free. If surface becomes
®
dirty, unplug tool and, when it is cool, wipe the
exterior with a cloth. If anything abnormal occurs, contact
Customerservicer@beachwaver.com
to repair tool yourself.
Attempting to repair tool yourself voids warranty.
WHEN NOT IN USE
When not in use, turn off and uplug the styling tool.
Allow the tool to cool, and store out of reach of children
in a safe, dry location. Never wrap the cord around the
tool as this may cause premature wear of the cord and
may lead to cord damage that is not covered under the
manufacturer's warranty. Handle the cord carefully to
extend cord life, and avoid jerking, bending, or twisting
the cord, especially at the plug connection.
NOTE: Always remember to turn off styling tool BEFORE
unplugging to avoid any risk of electrical shock or
damage
How To Change

Attachments

®
for support. Do not attempt