Related Manuals for Electrolux EHG645BE
Summary of Contents for Electrolux EHG645BE
- Page 1 EHG645BE EHG635BE EHG645SE EHG755SE EHG955SE EHG955BE EHG953BE Cooking User manual...
-
Page 2: Table Of Contents
• Ensure burner bodies and trivets are properly located • Catering and similar non-retail applications affect your ability to make a claim under the Electrolux manufacturer’s warranty provided with your product. (see Figure 1). Record model and serial number here: Products must be used, installed and operated in •... -
Page 3: Part Names
Skirt Ignition spark plug Flame safeguard sensor Figure 2a EHG645BE EHG645SE Burners – this unit has a small, medium, large and Burners – this unit has a small, medium, large and dual wok bu rner dual wok burner Ceramic Glass hob – the glass hob is resistant to... - Page 4 PART NAMES (CONTINUED) Figure 2g Figure 2d Figure 2e Figure 2f Front view Front view Scale: Scale: Front view Scale: EHG755SE EHG955SE EHG955BE EHG953BE Burners – this unit has a small, medium (2 per), large Burners – this unit has a small, medium (2 per), large Burners –...
-
Page 5: Before First Use
BEFORE FIRST USE USING YOUR COOKTOP BURNERS INSTALLATION CONTROLS Choice of burner Figure 4 For your convenience there is a choice of burners: Standard burner • An authorised person must install this appliance and Each burner is controlled by a control knob. The markings MUST provide a Certificate of Compliance. -
Page 6: Cleaning And Care
CLEANING AND CARE Ceramic Cooktop Cleaning CUSTOMER ADVICE Sometimes SURFACE stains appear to be a “bubble” mark under the ceramic glass. These can be cleaned off with a razor blade scraper and ceramic cleaner. CAUTION Keeping the ceramic cooktop clean and protected will keep it in good condition and help avoid breakage. -
Page 7: Troubleshooting
CLEANING AND CARE Troubleshooting Stainless Steel Cooktop Cleaning If you have a problem with the cooktop, check the table below. You may be able to solve the problem and this NOTE: Ensure any oil is cleaned off the hob before use, otherwise it may cause the hob to turn a will save you from paying for a service call. -
Page 8: Installation Instructions
A certificate of compliance MUST be given to the customer after the application is successfully installed. 161 min* Figure 6a – EHG645SE & EHG645BE & EHG635BE Clearance from bench to bottom gas supply connection location Clearance 146 min* 148 min*... -
Page 9: Technical Data
TECHNICAL DATA electrolux.com.au We reserve the right to alter these specifications. This appliance conforms to AS 5263. Figure 6b – EHG755SE Table 2 features EHG635BE EHG645BE EHG645SE Cooking zones Yes, dual Yes, dual Yes, dual Ignition 230-240V 230-240V 230-240V Trivet... -
Page 10: Installation Procedure
INSTALLATION PROCEDURE TECHNICAL DATA The bench cutout should be made as per cutout For Stainless Steel models MASTIC TAPE has dimensions in Table 2 and Figure 6. been provided and is to be placed around the bench cutout as specified in Figure 8. Take care to Adjacent walls, cupboards and protection for ensure that the seals meet without overlapping. - Page 11 Figure 7a – EHG645SE & EHG645BE & EHG635BE Figure 7c – EHG955SE & EHG955BE combustible surface combustible surface combustible surface Figure 7d – EHG953BE Figure 7b – EHG755SE combustible surface no minimum distance...
- Page 12 22 electrolux.com.au Figure 8a - Mastic seal position for model EHG645SE Figure 8 – Clamp fitment seal benchtop 25mm burner box clamp 12mm 12mm screw...
-
Page 13: Gas Connection
24 electrolux.com.au GAS CONNECTION OPERATION ON N.G./S.N.G ELBOW POSITIONING Figure 8b - Mastic seal position for model EHG755SE This appliance is supplied for use with Natural Gas. It is possible to reposition the elbow if required by However, it can be converted for use with LPG. - Page 14 26 electrolux.com.au CHECKING THE GAS SUPPLY LPG CONVERSION supply line in the correct orientation, the arrow on the Assembly of the regulator base of the body indicates the direction of gas flow. The assembly of the regulator to the cooktop manifold is This appliance is supplied set up for Natural Gas usage.
-
Page 15: Electrical Connection
TESTING APPLIANCE OPERATION ELECTRICAL CONNECTION (220-240 VOLTS) After installation, test the appliance and ensure that it The appliance is supplied with a standard 7.5 Amp service CAUTION operates correctly before handing it over to the customer. cord terminated by a 3-pin plug for connection to a standard... -
Page 16: Warranty
Guarantee Act does not apply. warranty. 11. C onfidentiality: You accept that if you make a warranty claim, Electrolux 7. Exclusions: You may not make a claim under this warranty unless the and its agents including ASC may exchange information in relation to you defect claimed is due to faulty or defective parts or workmanship. - Page 17 0800 225 088 email: customercare@electrolux.co.nz web: electrolux.co.nz To add a touch of professional inspiration to your home, visit electrolux.com.au or electrolux.co.nz electrolux.com.au or electrolux.co.nz P/No. ANC 305387219 Rev C © 2022 Electrolux Home Products Pty Ltd. ABN 51 004 762 341 E_MAN_GASCT_NOV1...