total sheds Apex Shed 6ft x 7ft Assembly Manual page 9

STEP • 14
CUTTING THE ROOF
FELT
Use the felt table to cut
your felt to the correct
size
CUTTING THE ROOF FELT
14a. Use the Stanley knife to cut your felt into the correct size. Using the table below, find the shed
size that you have and cut your felt down to achieve the size that you will need.
Example:
Apex Shed 6ft x 7ft
The 6 by 7 Shed needs 5 sheets of felt. All at 8ft each.
4ft (x3)
4 ft 5ft
5 ft 6ft
6 ft 7ft
7 ft 8ft
8 ft 9ft
9 ft 10ft
10 ft 11ft
11 ft 12ft
12 ft 13ft
13 ft 14ft
14 ft 15ft
15 ft 16ft
16 ft 17ft
17 ft 18ft
18 ft 19ft
19 ft 20ft
20 ft 21ft
© Sheds (Midlands) Limited 2021
Build Depth
5ft (x3) 6ft (x5) 7ft (x5)
5ft 5ft 5ft
6ft 6ft 6ft
7ft 7ft 7ft
8ft 8ft 8ft
9ft 9ft 9ft
10ft 10ft 10ft
11ft 11ft 11ft
12ft 12ft 12ft
13ft 13ft 13ft
14ft 14ft 14ft
15ft 15ft 15ft
16ft 16ft 16ft
17ft 17ft 17ft
18ft 18ft 18ft
19ft 19ft 19ft
20ft 20ft 20ft
21ft 21ft 21ft
STEP • 15
ATTACH THE ROOF FELT
Use the felt lengths
provided.
ROOF FELT
8ft (x5)
5ft
6ft
7ft
8ft
9ft
10ft
11ft
12ft
13ft
14ft
15ft
16ft
17ft
18ft
19ft
20ft
21ft
www.totalsheds.co.uk
15a. Apply the roof felt as shown. Apply lower levels first to create
correct rain run off positions.
15b. Using a hammer, tack down the felt with the tacks provided in a
neat fashion.
15c. Trim down excess felt with a stanley knife. Remember to
overlay the 1st felt to avoid rain leaks.
15d. Tuck and fold edges neatly and tack in place to hide any
loose edges. Check that all areas are covered and there are no
holes to avoid any rain water getting through your felt roof.
TACKS PROVIDED
08