Samsung CXJ1331/TUCX Service Manual page 19

4. Alignment and Adjustments (TV)
4-1 Factory Alignment
4-1-1 Factory Mode Menus
Since there are no VRs in the V15A chassis, all adjustments must be
performed in the ÒFactory mode.Ó Factory Mode adjustments are necessary
if either the EEPROM (IC902) or the CRT is replaced. Do not attempt to
make adjustments in either the Play Mode or Line-in Mode.
4-1-2 Entering the Factory Mode
Press the following transmitter keys in
STANDBY mode:
MUTE ® 1 ® 8 ® 2 ® POWER
ÒFactory Mode MenuÓ is displayed
10
PICTURE CONTROL
AGC 45 BC
VCO 40 GG
SCT 30 BG
SCR 20 SB
STT 36 VA
RC 0 VS
GC 0 HS
Example for ÒVCOÓ : Use the CH down key to select VCO, and use the
Volume + (or VOL - key) to change the data.
VCO 45
Samsung Electronics
All manuals and user guides at all-guides.com
SVC, MUTE
0
128
128
15
36
0
16
Alignment and Adjustments (TV)
4-1