Table of Contents
Advertisement
Others
Connect the SA-DV6000 to Windows Media Player using the network.
1.
Set STREAM TYPE in the ENCODE SETUP menu to "for WMP".
2.
Open Windows Media Player.
3.
Select [File] → [Open URL].
The following dialog box will appear.
4.
Set the IP address of the VTR.
http://***.***.***.***:####/asf
* → IP address of VTR
# → HTTP Port number set in "for Media player"
5.
When completed with setting, select OK to establish connection.
Memo
● If there is a lag between the video and audio, set the sampling frequency of input and the audio mode of BR-DV6000 to match,
stop playback on Media Player and try again.
● WMP for Mac OS not supported.
Use QuickTime Player. ( ☞ page 63)
Connecting Windows Media Player
62
Others
Connect the SA-DV6000 to QuickTime Player using the network.
1.
Set STREAM TYPE in the ENCODE SETUP menu to "for QT".
2.
Open Quick Time Player.
3.
Select [File] → [Open URL with New Player].
The following dialog box will appear.
4.
Set the IP address of the VTR.
rtsp://***.***.***.***/live.mp4
* → IP address of VTR
5.
When completed with setting, select OK to establish connection.
Memo
● When quickly alternating Play and Still operations on QuickTime, a 455 error dialog may appear. In this case, turn off the BR-
DV6000 and turn the power back on.
● When repeating Open and Close operations on the QuickTime Player, there may be a lag between the audio and video. In this
case, restart QuickTime.
● If there is a lag between the video and audio, set the sampling frequency of input signals and the audio mode of BR-DV6000 to
match, close QuickTime and launch again.
Connecting Quick Time Player
63
Advertisement
Table of Contents
