Logitech Z323 Speaker System With Subwoofer Setup Guide

1. Plug the d-sub connector on the right satellite into the d-sub subwoofer port Then plug the RCA connector on the left speaker into the corresponding jack on the back of the subwoofer
   
   
2. Plug the power plug into an electrical outlet
   
   
3. Turn the speaker on using the power knob
   

1. For 3 5 mm connection:
   Connect the 3 5 mm plug from the right speaker to the audio jack on your device (computer, tablet, smartphone, etc ) You can also connect a device to the auxiliary input on the side of the right speaker
   
   
2. For RCA connection:
   Connect one end of the RCA cable to the corresponding RCA jack on the back of the subwoofer and the other end to the RCA jack on your device (TV, gaming console, etc ) Note: The RCA cable is not included in the box and must be purchased separately
   
   
3. Plug your headphones into the headphone jack on the side of the right speaker To adjust the volume of your headphones, use the volume control knob on the front of the right speaker
   

ADJUST THE VOLUME

To adjust the volume on the speakers, use the control knob on the right speaker Turn clockwise (counter-clockwise) to increase (decrease) the volume

ADJUST THE BASS

Adjust the bass level by turning the bass control knob on the back of subwoofer Turn bass knob to the right for deeper bass or to the left for less bass