Logitech M585 / M590 SILENT - Mouse Setup Guide

SYSTEM REQUIREMENTS

Unifying USB Receiver

Available USB port
Windows^® 10 or later
Windows^® 8 or later
Windows^® 7 or later
MAC OS X 10.10 Chrome OS™
Linux Kernel 2.6

Bluetooth^® Low Energy Technology

Windows^® 10 or later
Windows^® 8 or later
MAC OS X 10.10
Chrome OS™
Android 5.0 or later

Logitech Options

Windows^® 10,
Windows 8, and
Windows 7
MAC OS X 10.10 or above
Logitech Flow requires a compatible mouse and at least two computers that can connect to each other over a local area network

PRODUCT OVERVIEW

1. Scroll wheel button and tilt buttons
2. Easy-Switch™ button
3. Channel and battery indicator
4. Forward button
5. Back button
6. On/Off slider
7. Battery and Unifying receiver storage*
   * Unifying receiver inside

CONNECT

Bluetooth wireless technology

In case you have limited USB slots, you can connect your M585 or M590 Silent mouse to your computer using Bluetooth. For compatibility requirements, please refer to system requirements

1. Download Logitech Options, click Add Devices, and select Add Bluetooth Device
   
   www.logitech.com/options
   
2. Remove pull tab or make
   
   
3. Short press Easy-Switch
   
   
4. Long press Easy-Switch
   
   
5. Find your M585/M90 mouse sure your mouse is ON button to select desired button to enter pairing on the list of Bluetooth channel mode devices and connect
   
   Logitech M585/M590 Silent can connect to one computer on the two provided channels using Bluetooth.

Unifying USB receiver

One tiny receiver for up to six Unifying devices. Plug it and leave it, then connect additional mice and keyboards to one computer.

First time out of the box

1. Download Logitech Options, click Add Devices, and select Add Unifying Device
   
   www.logitech.com/options
   
2. Remove pull tab or make sure your mouse is on and extract Unifying receiver from battery hatch
   
   
3. Short press Easy-Switch button to select desired channel
   
   
4. Long press Easy-Switch button to enter pairing mode
   
   
5. Insert Unifying USB receiver
   

Repair with an existing Unifying receiver

1. Download Logitech Unifying Software
   
   www.logitech.com/unifying
   
2. Make sure your mouse is On
   
   
3. Short press Easy-Switch button to select desired channel
   
   
4. Long press Easy-Switch button to enter pairing mode
   
   
5. Open Unifying software and follow onscreen instructions
   

Connecting to 2 systems

1. Download Logitech Options on both systems
   
   www.logitech.com/options
   
2. Make sure your mouse is On
   
   
3. Long press Easy-Switch button to enter pairing mode
   
4. Connect to your first computer via either Unifying USB receiver or Bluetooth
   
   
5. Short press Easy-Switch button to switch to next channel
   
   
6. Long press Easy-Switch button to enter pairing mode
   
   
7. Connect to your second computer via Unifying USB receiver or Bluetooth
   
   
8. Enable FLOW through Logitech Options or press Easy-Switch button to switch between devices
   

Logitech M585/590 Silent can connect to up to two computers with either Bluetooth or Logitech Unifying receiver. One receiver is included in the box.

Documents / Resources

References

• Download Logitech Options Customization Software
• Download Logitech Options Customization Software

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Logitech M585 / M590 SILENT - Mouse Setup Guide