DIEBOLD NIXDORF D2156 Operator's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

D2156 Display

Operator Manual

01750368517 B

Confidential External

Only Diebold Nixdorf and entities that are granted an express written license by Diebold Nixdorf may

possess or use this material. Unauthorized possession or use is illegal. If you do not have a written

license agreement with Diebold Nixdorf, the Documentation License terms at dnlegalterms.com apply.

Table of Contents

Need help?

Do you have a question about the D2156 and is the answer not in the manual?

Questions and answers

Summary of Contents for DIEBOLD NIXDORF D2156

Page 1 01750368517 B Confidential External Only Diebold Nixdorf and entities that are granted an express written license by Diebold Nixdorf may possess or use this material. Unauthorized possession or use is illegal. If you do not have a written license agreement with Diebold Nixdorf, the Documentation License terms at dnlegalterms.com apply.
Page 2 This document and the information contained herein are provided AS IS AND WITHOUT WARRANTY. In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or consequential dam- ages of any nature resulting from the use of information in this manual. The information contained in this document is subject to change without notice.
Page 3: Table Of Contents
How to operate ....................10-6 10.2.2 Cleaning instructions ..................10-6 10.2.3 Installation......................10-6 10.3 NFC Module........................10-9 10.3.1 Installation......................10-9 10.4 2D Barcode Reader (BCR) ....................10-13 10.4.1 Overview ......................10-13 Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 4 11.2 Projected Capacitive Touch Screen .................. 11-3 11.3 Supported Resolutions ...................... 11-3 11.4 NFC Module........................11-3 11.5 2D Barcode Reader ......................11-6 11.6 iButton..........................11-8 11.7 MSR........................... 11-10 11.8 Fingerprint Reader Module ....................11-12 Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 5 Table of Contents List of Figures Figure 4-1 Display D2156 ....................... 4-1 Figure 5-1 D2156 - Front Panel ....................5-1 Figure 5-2 D2156 - Connector panel ..................5-3 Figure 6-1 GUIDDCMonitorControl ..................6-1 Figure 8-1 D2156 - Removing screws ..................8-2 Figure 8-2 D2156 - Removing screws ..................
Page 6 Figure 10-36 Snapping back the BCR top cover ............... 10-17 Figure 10-37 BCR swivel angles....................10-17 Figure 11-1 D2156 – Dimensions with wall mount..............11-2 Figure 11-2 D2156 - Dimensions with stand ................11-2 Figure 11-3 NFC Dimension Drawing ..................11-5 Figure 11-4 2D BCR Dimension Drawing .................
Page 8: Manufacturer's Declaration And Approval
CAN ICES-3 (A)/NMB-3 (A) Tested safety The Display D2156 has been awarded the cTUVus symbol. User information Repair work on the devices should only be carried out by authorized and specially trained personnel. Improper repairs will lead to the loss of any guarantee and liability claims.
Page 9 DIN VDE 0100, part 540, Appendix C2, as well as EN50174-2, §5.4.3. Warranty Diebold Nixdorf guarantees generally a warranty engagement for 12 months beginning with the date of delivery. This warranty engagement covers all those damages which occur despite a normal use of the product.
Page 10 There are still some parts that are not reusable. Diebold Nixdorf guarantees the environmentally safe disposal of these parts in a Recycling Center, which is certified pursuant to ISO 9001 and ISO 14001.
Page 11: Supplier's Declaration Of Conformity
2 Supplier’s Declaration of Conformity Product Description: LCD Monitor Model: Display D2156 Party issuing Supplier’s Declaration of Conformity Diebold Nixdorf Singapore PTE. LTD. 30A Kallang Place, #04-01 Singapore 339213 Phone: +65 6747 3828 Responsible Party – U.S. Contact Information Diebold Nixdorf 5995 Mayfair Road N.
Page 12: Introduction
• a desk terminal. The low-energy and flicker-free color monitor of the D2156 is a LCD in TFT-technology (Thin Film Tran- sistor). Therefore, it is well suited for multimedia applications as it offers brilliant color representation, an excel- lent contrast ratio and a high display speed.
Page 13: Features At A Glance
• LCD TFT technology • Digital interface • Simple installation via plug & play feature • Mounting VESA 100 standard • Integrated loudspeaker • USB interface for external devices Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 14: About This Manual
This manual informs you about everything you might need to know for the installation (software and hardware), the operation and the maintenance of your D2156 . Same parts of this book require familiarity and experience in working with operating systems and instal- lation and configuration procedures.
Page 15: Display Overview
The LCD TFT Display is a 15.6-inch flat panel display which is absolutly flicker-free. It is designed with a native resolution of 1920 x 1080 pixels. Application programs should use this resolution. Touch Screen per Model Model Screen Size Touch Screen Display D2156 15.6” Projected Capacitive Touch Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 17 If the display is manually switched off, it will not wake up automatically when the system boots. When the D2156 is connected via PLINK2™ interface to a BEETLE system, the button also switches the system on or off, provided that the system supports the feature. See RMT Enable/Disable for details.
Page 18: Connector Panel
The following sockets are located under the bezel of the display: DC-Power Jack (12V) USB-A USB-C / DP DVI-D / PLINK2 Figure 5-2: D2156 - Connector panel DC-Power Jack Power supply for the screen via external power supply or poweredUSB (12V) USB-C/DP USB connection to the PC system...
Page 19: Display Settings
6 Display Settings The D2156 display offers several settings which are available through a GUI software tool (GUIDDC- MonitorControl). GUI software tool is available in Windows 7 (32bit/64bit), Windows 10 (32bit/64bit) and Linux CentOS 7/8 (64bit). The GUIDDCMonitorControl.exe is an executable file and does not require any installation.
Page 20 Enable/Disable of RMT (Refer to disable Sect 6.1). Setting only applicable for PLINK2 connection to BEETLE system. Power Button LED Enable/Disable of Power Button enable during display Softoff/Sleep (Re- fer to Sect 5.1). Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 21: Rmt Enable/Disable
System no reaction; Display switches off. RMT enabled RMT disabled System no reaction; Display remains off. System no reaction; Display remains RMT disabled System no reaction; Display remains off. System no reaction; Display switches off. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 22: Power Button - Lock/Unlock
If RMT is enabled, the power button will initiate RMT signal to the host system only when there is single PLINK connection. If the display is powered by DC-Jack or USB-C, then RMT signal will not be initiated. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 23: Touch Technologies
Dampen the cloth slightly and then clean the screen. NOTE A wrong maintenance may cause damages to the screen, which are not covered by guarantee or warranty. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 24: Initial Setup
If damage has occurred during shipping or if the package contents do not match the delivery note, immediately inform your Diebold Nixdorf sales outlet. Transport the device only in its original packaging (to protect it against impact and shock).
Page 25: Figure 8-1 D2156 - Removing Screws
Preparing the Display 1. Place a protective sheet on a flat surface 2. Lay the display face down on the protection sheet. 3. Remove the 4 screws (1). Figure 8-1: D2156 - Removing screws Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 26: Installing The Display To The Stand (Standard)
Tighten the 4 M4x6 countersunk screws (1) (that came with the stand) to secure the sys- tem to the stand. Tilt the display back to access the connector panel at the bottom of the display. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 27 Attach the cable cover. Tilt the display back to its operating position. Replace the VESA cover (1) by pushing it upwards. NOTE When uninstalling the stand, always make sure that all cables are disconnected. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 28: Installing The Display To The Stand (With Cable Covers)
(indicated by arrow). From the stand: Remove the VESA cover by sliding it down- wards (indicated by arrow). NOTE Be careful when removing the VESA cover to avoid damaging it. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 29: Figure 8-2 D2156 - Removing Screws
Preparing the Display 1. Place a protective sheet on a flat surface 2. Lay the display face down on the protection sheet. 3. Remove the 4 screws (1). Figure 8-2: D2156 - Removing screws Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 30 (that came with the stand) to secure the sys- tem to the stand. Tilt the display back to access the connector panel at the bottom of the display. Remove the cable cover (1) at the bottom of the display. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 31 Remove the cable cover (1) at the bottom of the display. Route the cables from the connector panel in the path as illustrated (arrows). Replace the cable cover previously removed. 1. Tilt the display back to its operating position. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 32 Replace the VESA cover by sliding it up- wards. 10. Align the back cable cover (1) with the front cable cover (2). 11. Replace back cable cover (1) by sliding it up- wards. Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 33: Connecting The Display
Switch off the display and disconnect it from the main supply before connecting the cables. Wall Mount NOTE In case of wall mount configuration, installation height must be ≤ 2m, using 4 mounting screws (M4x6). Confidential External 8-10 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 34: Ergonomic Terminal Workplace
Avoid reflective glaring caused by electric light sources. Position the screen within a preferred and permit- ted range of vision, so that you can look vertically Preferred range of vision onto the screen. Preferred range of vision Confidential External Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 35: Peripherals (Optional)
For guide on software application programming, please refer to the system MSR/Waiter Lock Programming Manual. 10.1.1 10.1.1 Installation 1. The Waiter Lock kit as seen. Containing the Waiter Lock module and two M3x4 screws. Figure 10-1: Waiter Lock kit Confidential External 10-1 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 36: Figure 10-2 Removing Waiter Lock Side Cover
2 ends outwards (see arrows) with a small screwdriver. Figure 10-2: Removing Waiter Lock side cover 3. Then, slide the side cover out (see arrow). Figure 10-3: Sliding out the side cover Confidential External 10-2 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 37: Figure 10-4 Removing The Side-Attach Peripheral Connection Cover
4. Remove either side-attach peripheral connec- tion cover of the system. Figure 10-4: Removing the side-attach peripheral connection cover 5. The side-attach peripheral connection cover now removed as seen. Figure 10-5: Side-attach peripheral connection cover re- moved Confidential External 10-3 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 38: Figure 10-6 Fitting The Waiter Lock Into The System
Figure 10-7: Tightening the Waiter Lock screws 9. Re-attach the side-attach peripheral connec- tion cover. 10. Re-attach the Waiter Lock side cover. 11. The Waiter Lock is now installed. Figure 10-8: Waiter Lock installed Confidential External 10-4 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 39: Figure 10-9 Front View With Waiter Lock
Peripherals (optional) 12. The front view of the system with the Waiter Lock as seen. Figure 10-9: Front view with Waiter Lock Confidential External 10-5 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 40: Magnetic Swipe Card Reader (Msr)
10.2.2 Cleaning instructions In order to guarantee good reading results, the swipe card reader should be cleaned from time to time. This is carried out by using a special cleaning card that can be purchased from Diebold Nixdorf. 10.2.3 10.2.3 Installation The MSR kit as seen.
Page 41: Figure 10-11 Removing Side Cover Of Msr Module
USB port of the system. Fit each knob on the MSR module into its re- spective groove on the system as indicated. Figure 10-13: Fitting the MSR module into the system Confidential External 10-7 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 42: Figure 10-14 Tightening The Screws Of The Msr Module
The MSR is now installed. Back view of the system with the MSR as seen. Figure 10-15: MSR module installed 10. The front view of the system with the MSR as seen. Figure 10-16: Front view with MSR module Confidential External 10-8 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 43: Nfc Module
Figure 10-17: NFC module kit 2. Gently remove the NFC Module side cover by prying the 2 ends outwards (arrows) with a small screwdriver. Figure 10-18: Removing the NFC module side cover Confidential External 10-9 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 44: Figure 10-19 Sliding Out The Side Cover
3. Then, slide the side cover out (see arrow). Figure 10-19: Sliding out the side cover 4. Remove either side-attach peripheral connec- tion cover of the . Figure 10-20: Removing the side-attach peripheral connec- tion cover Confidential External 10-10 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 45: Figure 10-21 Side-Attach Peripheral Connection Cover Removed
USB port of the . 7. Fit each knob on the NFC Module into its re- spective groove on the system as indicated. Figure 10-22: Fitting the NFC module into the Confidential External 10-11 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 46: Figure 10-23 Tightening The Screws Of The Nfc Module
10. Re-attach the NFC Module side cover. 11. The NFC Module is now installed. Figure 10-24: NFC module installed The front view of the with the NFC Module as seen. Figure 10-25: Front view with NFC module Confidential External 10-12 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 47: Barcode Reader (Bcr)
WARNING Do not stare into the red LED beam during operation. System overview with BCR Figure 10-26: System overview with BCR System front view with BCR Figure 10-27: Front view with BCR Confidential External 10-13 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 48: Installation
1. Remove the BCR top cover by inserting a small flat-head screwdriver into the slot (1) and pry open gently. 2. Repeat this for the slot on the opposite side. Figure 10-30: Removing the BCR top cover Confidential External 10-14 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 49: Figure 10-31 Sliding Out The Bcr Top Cover
(1) on the system. Figure 10-32: Removing the peripheral connection cover 5. Dock the BCR module to the system. Align the locating pins and screws (see arrows). Figure 10-33: Docking the BCR to the system Confidential External 10-15 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 50: Figure 10-34 Swivelling The Bcr Scanner
6. Swivel the Scanner such that the 2 locking screws are accessible. Figure 10-34: Swivelling the BCR Scanner 7. Tighten the 2 locking screws (1) with a screw- driver. Figure 10-35: Tightening the locking screws Confidential External 10-16 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 51: Swivel Angle
The A Family Fingerprint Reader module delivers a secure login and identification process for the retail sector. Via biometric analysis of fingerprints, it offers a perfect authentication for securing access into EPOS systems, especially in those retail environments that are accessible and open. Confidential External 10-17 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 52: Cleaning Instruction
If necessary, gently dab the fingerprint sensor (do not wipe) with a soft cloth (not paper) dampened with a mild ammonia-based glass cleaner to remove any milky haze. Confidential External 10-18 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 53 ● Do not pour cleaning fluid directly on the fingerprint capture area. ● Do not submerge the sensor in liquid. ● Do not rub the fingerprint capture area with any abrasive material, including paper. Confidential External 10-19 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 54: Installation
1. The Fingerprint kit is as seen. It contains the Fingerprint module. 2. Gently remove the side cover by prying the 2 ends outwards (see arrows) with a small screwdriver. Confidential External 10-20 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 55 3. Then, slide the side cover out (see arrow). NOTICE! Make sure to slide out the side cover correctly. 4. On the side to install the peripheral, remove the side-attach peripheral connection cover (1) of the BEETLE A Family. Confidential External 10-21 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 56 6. Insert the Fingerprint module into the now ex- posed USB port of the BEETLE A Family. 7. Fit each knob on the Fingerprint module into its respective groove on the system as indi- cated. Confidential External 10-22 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 57 8. Position the screws to the correct location. 9. Then put on and tighten two M3x7 screws. Screw in torque = 5 to 7 kgf.cm 10. Re-attach the side cover (see arrows). Confidential External 10-23 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 58 Peripherals (optional) 11. Re-attach the side cover. The Fingerprint module is now installed. 12. The front view of BEETLE A/ D Family with Fingerprinter Reader as seen. Confidential External 10-24 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 59: Technical Data
85 °/ 85 ° Viewing Horizontal angle 85 °/ 85 ° Vertical 350 cd/ m Brightness Projected Capacitive 1000:1 Contrast Projected Capacitive Backlight 11 W Power Typical consumption 15 W Maximum Confidential External 11-1 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 60: Dimensions
Technical Data 11.1 11.1 Dimensions D2156 with wall mount Figure 11-1: D2156 – Dimensions with wall mount D2156 with stand Figure 11-2: D2156 - Dimensions with stand Confidential External 11-2 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 61: Projected Capacitive Touch Screen
55.94 59.89 1680 x 1050 60 Hz 65.29 59.95 1920 x 1080 (Native) 60 Hz 67.50 60.00 11.4 11.4 NFC Module Table 11-1: NFC Supported Standards ISO/IEC 14443A/MIFARE ISO/IEC 14443B FeliCa Confidential External 11-3 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 62 RF Output Power 1W (max.) Operating Temperature 5 ºC to 40 ºC Middleware support Operating Systems Windows & Linux Certification EN 50364 Weight 39 g Dimensions 85.4 x 53.3 x 23.1 mm Confidential External 11-4 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 64: Barcode Reader
Code, GS1-Datamatrix, Micro QR Code, Maxi Code, GS1-QR Code Operating Condition -20 to 50 degree Celsius 10 to 90% RH Weight 190 g Dimensions 86.9 mm x 104.1 mm x 35 mm Swivel angle 165 degrees clockwise/anti-clockwise Confidential External 11-6 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 66: Ibutton
Operating Systems sup- Windows 10, WNLPOS4 ported • JavaPOS 1.13/OPOS UDM (ProBASE/POS) Software options • VirtualCOM Firmware Upgradeable via USB DFU Weight 64 g Dimensions 85.4 x 53.3 x 29.4 mm Confidential External 11-8 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 68: Msr
Reading Speed 10 to 140 cm/sec • JavaPOS 1.13/OPOS UDM (ProBASE/POS) Software options • VirtualCOM Firmware Upgradeable via USB DFU Weight 42 g Dimensions (WxHxD) 83 x 43.5 x 22.3 mm Confidential External 11-10 Copyright © 2023, Diebold Nixdorf 01750368517 B...
Page 70: Fingerprint Reader Module
8-bit grayscale (256 levels) Image Distortion < 1% (Typical) Speed of Image Transfer <0.17 seconds Compatible System DN A Family and D-series Weight 77 g Dimensions 87.3 x 68.5 x 35.4 mm Confidential External 11-12 Copyright © 2023, Diebold Nixdorf 01750368517 B...

DIEBOLD NIXDORF D2156 Operator's Manual

Quick Links

Need help?

Questions and answers

Related Manuals for DIEBOLD NIXDORF D2156

Summary of Contents for DIEBOLD NIXDORF D2156

Table of Contents