Table of Contents
Advertisement
If you drive past a waypoint and this does "not disappear" from the waypoint
tour (e.g. because the distance to this waypoint is too large), then there is the
possibility to "skip" over this waypoint and continue the guidance to the next
waypoint.
In the Waypoint mode main menu, tap on the function interface → Skip way-
▶
point.
Stop route guidance
▶
In the Waypoint mode main menu, tap on the function interface → Stop
route guidance.
The guidance also stops when waypoint mode is exited.
Manage waypoint tour memory
›
to display a list of saved and imported waypoint tours, from main menu
Waypoint mode, tap the function surface → Waypoint memory.
The name of the waypoint tour, the date and time of storage and the number
of waypoints appears in the function interface for the waypoint tour.
›
Choose the desired waypoint tour, and then select one of the following menu
items.
Store the waypoint tour on the SD card
Delete the waypoint tour
Rename the waypoint tour
Display the waypoint tour
» fig. 235
Import waypoint tour from the SD card
In the Waypoint mode main menu, tap on the function interface → Waypoint
▶
memory → Import.
▶
Select the source of the waypoint tour recording and confirm the import.
190
Infotainment
on page 189
Traffic reports
List of traffic reports
Infotainment allows you to receive TMC traffic reports (Traffic Message Chan-
nel), which contain information regarding traffic obstructions.
ŠKODA AUTO does not accept responsibility for the availability, content, up-
to-dateness or evaluation of TMC traffic reports or other data provided by
third parties. ŠKODA AUTO is not entitled to examine or adapt this data in any
way. The data can only be edited by Infotainment in areas where it is available.
›
To display the list of traffic reports, tap on the sensor field
the function surface .
In the list of traffic messages and the map, a max. of 6 messages are displayed,
that are provided with a letter and a traffic obstruction symbol (e.g. , , )
» fig.
236.
A
At present on the route traffic information is taken by using a nav. announce-
ment.
Source of Traffic Information
The symbol for the source of the traffic information is displayed at position
» fig.
236.
C
Display options
Route guidance is disabled - All traffic messages are displayed.
▶
▶
Route guidance is taking place - After tapping function surface
in the displayed menu, you can select all traffic messages by tapping the
function surface All areas, or you can select only the traffic messages present
on the route by tapping the function surface Route.
A traffic report may contain some of the following information.
Fig. 236
List of traffic reports
and then tap
B
» fig. 236
Advertisement
Table of Contents
