Introduction To Configuration Software Tool Interface - Ebyte K61-DL20 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd. User Manual
Figure 4-5 Setting tool software interface
(4) If the configuration software of "Pair Transmission Industrial Network IO Setting Tool.exe" fails to run, enter the
following steps.
Cause analysis: The reason for the failure to open may be that the version of Net_Framework in the computer
compilation environment is too low, and you need to install version 4.0 or above.
Install Mircosoft.Net_Framework_4.0 and above: Open the downloaded zip file and unzip the file → find and unzip
"Mircosoft.Net_Framework_4.0.rar" → double-click to run "dotNetFx40_Full_x86_x64.exe" → After completion, run
the "Intercommunication Industrial Network IO" Set up tool.exe".

4.1.3 Introduction to configuration software tool interface

As shown in Figure 4-6 below
(1) Communication serial interface. Support CH340/CH341 to drive serial port, can read 485, 232, TTL data.
(2) Display interface of product basic attributes. Read the company's product type, local S/N code (equipment unique
identification code), firmware version, etc.
(3) RTU product read configuration interface. Read and configure the company's product information parameters, so that
the product is suitable for various industrial system environments.
(4) The second communication interface reads the configuration interface. Read and configure the second communication
interface of the company's product, so as to connect the product to various communication types.
(5) "" is the relevant parameter comment. Users can view and help understand when configuring parameters.
(6) Chinese and English switching function. This configuration software supports Chinese and English interfaces, which
is convenient for foreign and domestic users to use.
(7) Log column. Users can view the configuration instructions of the company's modules according to the information in
the log column, and users can change the configuration module parameters according to the configuration instructions; at
Chengdu Ebyte Electronic Technology Co.,Ltd. 28
Copyright ©2012–2020，