Table of Contents
Related Manuals for Weslo WLEX61215.1
Summary of Contents for Weslo WLEX61215.1
-
Page 1: Warning Decal Placement
USER’S MANUAL Model No. WLEX61215.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference. -
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. WESLO is a registered trademark of ICON Health & Fitness, Inc. -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. -
Page 4: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new WESLO ® CROSS reading this manual, please see the front cover of this CYCLE exercise bike. Cycling is an effective exercise manual. To help us assist you, note the product model for increasing cardiovascular fitness, building endur- number and serial number before contacting us. -
Page 5: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. -
Page 6: Assembly
“R” or “Right.” Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to weslo on your computer and register your product. • documents your ownership • activates your warranty •... - Page 7 2. Turn the Rear Stabilizer (2) so that the slot (A) faces downward, and insert the Rear Stabilizer into the Frame (1). Attach the Rear Stabilizer (2) with four M6 x 10mm Machine Screws (25); start all the Machine Screws, and then tighten them. 3.
- Page 8 4. Identify the Right Upper Handlebar (41) and ori- ent it as shown. Insert the Right Upper Handlebar (41) into one of the Lower Handlebars (57). Make sure that the hexagonal holes (C) are in the indicated position. Attach the Right Upper Handlebar (41) with two M6 x 30mm Hex Bolts (32) and two M6 Locknuts (56).
- Page 9 5. Remove all parts from the Pivot Axle (3). Using a small plastic bag to keep your fingers clean, apply some of the included grease to the Pivot Axle (3) and to the indicated locations. Insert the Pivot Axle (3) into the Frame (1), and align the hole in the center of the Pivot Axle with the hole in the center of the Frame.
- Page 10 7. See the inset drawing. Orient the Console (7) and the Console Bracket (52) as shown, and insert the wire (E) on the Console through the Console Bracket. Attach the Console Bracket (52) to the Console (7) with four M4 x 13mm Screws (66); start all the Screws, and then tighten them.
- Page 11 9. Attach the Seat (11) to the Seat Post (10) with four M8 Locknuts (9) and four M8 Split Washers (8); start all the Locknuts, and then tighten them. Note: The Locknuts and Split Washers may be preattached to the Seat. Next, insert the Seat Post (10) into the Frame (1), and align one of the adjustment holes (F) in the Seat Post with the hole in the Frame (G).
-
Page 12: How To Use The Exercise Bike
HOW TO USE THE EXERCISE BIKE HOW TO ADJUST THE HEIGHT OF THE SEAT HOW TO ADJUST THE PEDALING RESISTANCE For effective exercise, the seat should be at the proper To vary the intensity height. As you pedal, there should be a slight bend in of your exercise, the your knees when the pedals are in the lowest position. - Page 13 FEATURES OF THE CONSOLE 1. Turn on the console. To turn on the console, press any button on the console or simply begin pedaling. 2. Set a workout goal if desired. To set a time, distance, or calorie-burning goal for your workout, press the MODE button repeatedly until the letters TMR, DST, or CAL appear in the display.
-
Page 14: Fcc Information
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 15: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE HOW TO ADJUST THE RESISTANCE STRAP Regular maintenance is important for optimal If there is not enough pedaling resistance when the performance and to reduce wear. Inspect and properly resistance knob is turned to the highest setting, the tighten all parts each time the exercise bike is used. -
Page 16: Exercise Guidelines
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian. -
Page 17: Part List
PART LIST Model No. WLEX61215.1 R0818B Key No. Qty. Description Key No. Qty. Description Frame M8 x 42mm Bolt Rear Stabilizer Pedal Arm Bushing Pivot Axle M8 Large Washer Frame Bushing Round Cap Front Stabilizer Left Upper Handlebar Leveling Cap... -
Page 18: Exploded Drawing
EXPLODED DRAWING Model No. WLEX61215.1 R0818B If you’re looking for quality exercise & fitness equipment, visit our website.
Need help?
Do you have a question about the WLEX61215.1 and is the answer not in the manual?
Questions and answers