Page 1
V1.0 English Quick Start Guide D20-Q2 QHD Dual Dashcam Wi-Fi & Smart ADAS The product is a dashboard camera. Make sure to understand the contents of the manual to use the product correctly.
2. The unit does not seem to operate normally. 3. The unit shows a marked change in performance. VUEROID does not warranty any defects that can be caused by owner’s fault VUEROID is not responsible for any damaged that occur while driving.
Product Overview ❶ ❷ ❾ ❿ ⓫ ❸ ❹ ❺ ❻ ❼ ❽ ⓬ ⓭ Mark Description ❶ CAM Input Port Used to connect the rear camera ❷ DC-IN Power Port Used to connect the power cable ❸ Wi-Fi Dongle Wi-Fi dongle for Wi-Fi network connection ❹...
Device Installation Caution - Make sure to install the device in a safe area and that the engine is OFF. - Please check if the Micro SD card is inserted correctly before connecting to power. - Make sure the installation area is clean. - Unplug the DC power if you are not using the device for a long period of time.
Page 5
- Make sure the device is turned off when you pull out the SD card. - Any issues arisen by using a different Micro SD card besides VUEROID’s are the responsibilities of the user.
VUEROID 4) Damage to a product by not using supplied power or accessories in the package. Firmware / Safety Camera DB update Full Manual / Firmware / Safety Camera DB, Download is available on the VUEROID website (http://www.vueroid.com/support/download). http://www.vueroid.com...
Page 8
Using Wi-Fi Application 1. Wi-Fi Application Download and Installation Search “VUEROID Dashcam” on the App Store (iPhone), Play Store (Android) then install. 2. Wi-Fi Application Registration Turn on the “Wi-Fi” button on the dashcam. Then it shows a SSID (VUEROID_D20-Q2_XXXXXX) on the list of Wi-Fi network.
Page 9
3. Wi-Fi Application Start-up Screen Display Wi-Fi status and the ❶ Wi-Fi Status name of the connected device. Enable or Disable Wi-Fi ❷ Wi-Fi Connect connection ❶ ❸ Live Viewer View the front / rear live stream. Find the recording files in ❷...
Page 10
ADAS Setting Following features are under development and will be applied through future updates. Download will be available on the VUEROID website (http://www.vueroid.com/ support/download). ADAS You can Enable or Disable a lane departure warning system (LDWS), a Front Vehicle Start Alarm (FVSA), a Forward Collision Warning System (FCWS), a Rear Collision Warning (RCW), and set their options.
Page 11
5. View the Recordings (File Viewer) The recording files in the D20 unit can be viewed through the File Viewer. Each folder support the ❶ ❷ ❸ ❹ ❺ thumbnail view with front / rear options. Drive recordings videos are saved. Recorded ❶...
Page 12
Plus, Travel-log drive will help drivers or fleet managers to find a vehicle’s current Location using the VUEROID Mobile app. Captured by the VUEROID Built-in antenna, the vehicle’s location, speed, and direction of travel is shown in the...
8. Review & Edit Footage on the App With this app you can immediately access your footage directly on your smartphone. Make quick edits to trim the excess and keep only the best parts. 9. Configuration (Setting) It gives you a complete control over your dash cam’s settings.
2. PC Viewer Compatibility The PC viewer is compatible for both Windows and Mac OS computers. 3. Start PC Viewer Open the installed VUEROID D20 Viewer on the desktop. Before opening the viewer, make sure the Micro SD card is inserted.
Need help?
Do you have a question about the D20-Q2 and is the answer not in the manual?
Questions and answers