Related Manuals for DOREMIDI MTD-1024
Summary of Contents for DOREMIDI MTD-1024
- Page 2 MIDI to DMX controller (MTD-1024) can convert MIDI messages to DMX messages. Supports MIDI Note/CC/After Touch MIDI messages, can map the value of MIDI messages to DMX channels, and can configure up to 1024 DMX channels. MTD-1024 can be used for MIDI performance, DMX lighting control scene.
- Page 3 Steps for usage 4.1. Power supply Supply power to the product through the USB port, support 5VDC/1A power supply input. 4.2. Connect Connect MIDI five-pin instrument: Connect the MIDI IN of the product to the MIDI OUT of the instrument through a MIDI five-pin cable.
- Page 4 Note Display Name Description Display and configure the parameters of the current serial number. Serial Number Parameter range: 1~1024. (Note: A new serial number will only be added after the existing serial number has been configured.) Configure the DMX channel. DMX Channel Parameter range: 1~1024.
- Page 5 Preparation Operating environment: Windows7 or above system. Software: Download the "AccessPort.exe" software. (Download from www.doremidi.cn) Connection: Connect the USB Device port of MTD-1024 to the computer. Configuring the COM port Open the "AccessPort.exe" software, select "Monitor→Ports→COMxx", as shown in the figure: (Note: The COM names of different computers are different, please choose according to the actual situation.)
- Page 6 Select "General", configure COM port parameters and click "OK", as shown in the figure: Upload configuration parameters Enter "upload request" in the software, click "Send", and you will receive "...end of data." as shown in the figure: ❸ ❶ ❷...
- Page 7 Click "Save" to save the data as a .txt file, as shown in the figure: Download configuration parameters Select "Transfer File→Select File→Send", and receive "download success." after sending successfully, as shown in the figure: ❶ ❷ ❹ ❸...
- Page 8 Question: "AccessPort.exe" software cannot find the COM port. Answer: Please confirm that the USB Device port of MTD-1024 has been connected to the computer, and MTD-1024 has been powered. Please try to connect to another USB port of the computer.
Need help?
Do you have a question about the MTD-1024 and is the answer not in the manual?
Questions and answers