Installing The Ac Adapter - NEC Dterm DTL-RPT-2 Manual

Issue 1.0
___________________________________________________________________________________
During registration, the LED on the front of the repeater will blink. The table explains
what the LED blink patterns indicate.
S 5 I
ECTION NSTALLING THE
1.
2.
___________________________________________________________________________________
2 - 6
State
Steady On
Slow blink (one blink per
second)
Flicker (2 rapid blinks per
second)
AC A
DAPTER
Using both thumbs, press down on the raised ridges of the adapter cover on the
repeater until you hear a click.
Figure 2-6 Removing the Adapter Cover
Being careful not to angle the cover, gently pull to remove it.
Table 2-1 Repeater LED Patterns
The repeater is registered to a base and has a good signal
from that base (or another repeater registered to that
base).
Standby mode. The repeater is not registered or cannot
be connected to the registered base.
The repeater is in registration mode (it is looking for a
base to register to).
term
D Cordless DECT
Meaning
Getting to Know Your Repeater