Firmware Update - Sungrow SG125HX User Manual

User Manual
table 7-10 MPLC Parameters
Parameter
Band Num
Array ID
Winding ID

7.8.5 Firmware Update

To avoid download failure due to poor on-site network signal, it is recommended to download
the firmware package to the mobile device in advance.
step 1 Enable the "Mobile data" of the mobile device.
step 2 Open the App, enter the account and password on the login screen. Tap Login to enter the
home interface.
step 3 Tap More→Firmware Download to enter corresponding interface on which you can view
the device list.
step 4 Select the device model before downloading the firmware. Tap the device name in the de-
vice list to enter the firmware upgrade package detail interface, and tap
ware upgrade package to download it.
step 5 Return to the Firmware Download interface, tap
to view the downloaded firmware upgrade package.
step 6 Login the App via local access. Refer to
step 7 Tap More on the App home page and then tap Firmware Update.
step 8 Tap the upgrade package file, a prompt box will pop up asking whether to upgrade the firm-
ware with the file, tap CONFIRM to perform the firmware upgrade.
figure 7-20 MPLC Parameters
Range
Band1, Band2
1–255
1–10
in the upper right corner of the interface
"7.4 Login".
7 iSolarCloud App
behind the firm-
79