Turning On And Standby; Turning On The Av Receiver - Onkyo TX-SR505 Instruction Manual
Onkyo tx-sr505: user guide
Hide thumbs
Also See for TX-SR505:
- Service manual (118 pages) ,
- Instruction manual (72 pages) ,
- Code manual (12 pages)
Table of Contents
Advertisement
Turning On the AV Receiver
STANDBY/ON
STANDBY indicator
STANDBY/ON
STANDBY
MULTI CH
PHONES
A
SPEAKERS
B
Turning On and Standby
1
AV receiver
STANDBY/ON
or
Smooth Operation in a Few Easy Steps
To ensure smooth operation, here's a few easy steps to help you configure the AV receiver before you use it for the
very first time. These settings only need to be made once.
■ Do the automatic speaker setup—this is essential!
See "Automatic Speaker Setup (Audyssey 2EQ)" on page 35.
If you've connected any speakers with an impedance of between 4 and 6 ohms, see "Minimum Speaker Imped-
ance Setup" on page 35 before the automatic speaker setup (not North American model).
■ For TX-SR505 North American model/TX-SR505E/TX-SR575
Have you connected a component to an HDMI IN or the COMPONENT
VIDEO IN (TX-SR575 only)?
If you have, see "Video Input Setup" on page 38.
■ Have you connected a component to a digital audio input?
If you have, see "Digital Audio Input Setup" on page 39.
■ Have you connected an Onkyo MD recorder, CD recorder,
or RI Dock?
If you have, see "Changing the Input Display" on page 39.
34
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
C D
TONE
STEREO
LISTENING MODE
DISPLAY
DIGITAL INPUT
DIMMER
MEMORY
TUNING MODE
CLEAR
Press the [STANDBY/ON] button.
Alternatively, press the remote controller's [RECEIVER] button, followed
Remote
controller
by the [STANDBY/ON] button.
RECEIVER
The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.
STANDBY/ON
To turn the AV receiver off, press the [STANDBY/ON] button again. The AV receiver
will enter Standby mode. To prevent any loud surprises when you next turn on the AV
receiver, always turn down the volume before you turn it off.
STANDBY/ON
MASTER VOLUME
TUNING
PRESET
SETUP
ENTER
RETURN
AUX INPUT
SETUP MIC
VIDEO
L
AUDIO
R
STANDBY/ON
INPUT SELECTOR
RECEIVER
1
2
V CR/DVR
CBL/SAT
4
5
AUX
MULTI CH
7
8
TAPE
TUNER
10
11
+ 10
0
D TUN
ENT
--/---
DIMMER
TV
VOL
INPUT
GUIDE
TOP MENU
SP A / B
HDMI
COAXIAL
OPTICAL
OUT
IN
CD recorder, MD recorder,
TAPE
RI Dock
REMOTE MODE
RECEIVER
DVD
TAPE/AMP
M D/CDR
C D
3
DOCK
TV
6
DVD
VCR
9
C D
CABLE
12
CLR
SAT
SLEEP
CH
VOL
DISC
ALBUM
PREVIOUS
MENU
MUTING
Y
P
B
P
R
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the TX-SR505 and is the answer not in the manual?
Questions and answers
I have a cable connecting my Iphone to an HDMI IN port. Which input source do I chose to make music from the Iphone play through the receiver? Alternatively, do I have to connect through the Aux source on the front of the receiver?
To play music from your iPhone on the Onkyo TX-SR505:
1. If using HDMI:
- Connect your iPhone to the AV receiver using an HDMI adapter.
- Assign the HDMI input to an input selector in the receiver’s setup menu (e.g., assign "HDMI DVD" to "IN1").
- Press the corresponding input selector button (like DVD or CBL/SAT) to choose the HDMI input.
2. If using AUX input:
- Connect your iPhone’s audio output to the AUX AUDIO IN jacks.
- Press the AUX input selector button to choose AUX as the input source.
Both options work, but HDMI provides better quality and allows video pass-through if needed.
This answer is automatically generated