Signal Status Led; Buttons - Ruijie Reyee RG-EW300R Configuration Manual

Web-based Configuration Guide
Status
Red
1.3

Signal Status LED

Status
Blinking alternately
White
Off
1.4

Buttons

Button
WPS Button
Reset Button
Description
Blinking The device is starting up. / The device is restoring factory settings.
Solid on The network is unreachable.
Description
The device is accessing the Wi-Fi network of the primary router.
Three bars on The signal strength is high.
Two bars on The signal strength is medium.
One bar on The signal strength is low.
1. The device is set to the router mode.
2. The device fails to access the Wi-Fi network of the primary
router.
Short press for less than 2s
Short press for less than 2s
Long press for more than 5s
Description
Establish a WPS network with other
routers.
Turn on or off the signal status LED.
The device restores factory settings.
2
Overview