Xblitz PURE BEAST - Wireless Headphones Manual

Introduction

We hope that it will meet your expectations. The product is made of the highest quality components. Using our headphones, you can listen to music with a smartphone and also have conversations thanks to the built-in microphone.

Follow the instructions below when using the device

1. Pay attention to the volume and duration of listening to music via the headset. Listening to loud music for too long can cause hearing damage.
2. Stop using the headset in potentially hazardous conditions.
3. Avoid listening to music as well as initiating / receiving calls while driving.
4. Keep the device and accessories away from children.
5. Keep the device away from water sources as well as high humidity environment.
6. Avoid raising the volume to a level at which you will not hear any background noise.
7. Storage temperature -15C to 55C.
8. Do not attempt to open or disassemble the device.

PRODUCT DESCRIPTION

1. Microphone
2. AUX Port
3. USB Port
4. LED
5. Volume down/Previous track
6. MFB – Multi Function Button
7. Volume up/Next track

OPERATING THE DEVICE

1. Turning on: Press and hold the MFB button for 3 seconds.
2. Turning off: Press and hold the MFB button for 3 seconds.
3. Answering an incoming call: Press the MFB button once.
4. Ending a phone call: Press the MFB button once.
5. Rejecting an incoming call: Press twice the MFB button.
6. Dialing the last phone number: quickly press the MFB button twice.
7. Play / pause music: Press the MFB button once.
8. Volume control: short press the "+" or "-" button to increase / decrease the volume by one step.
9. Selecting a song to play: press and hold the "+" or "-" button to select the next / previous song.
10. Connection via AUX cable: connect one end of the AUX cable to the port in the headphones, the other to the device from which the sound will be played.

CHARGING

1. When the battery is low, the headset will inform you with a voice message about the need to connect to the charger.
2. Turn the device off.
3. Connect the headphones with the micro USB cable to the computer charger, powerbank, phone charger or other power supply device with a DC5V 0.5-2A charging current.
   ATTENTION: do not connect to sources with a higher current, and in particular directly under 220 / 230V, as this may destroy or even ignite the headphones.
4. During charging, the LED will be red (Charging takes about 2.5 hours).

There may be problems connecting and using the headphones while charging. It is recommended not to use headphones when they are charging.

PAIRING WITH BLUETOOTH DEVICES (SMARTPHONE, TABLET, COMPUTER AND OTHERS)

1. Turn on the headphones.
2. Turn on bluetooth connectivity on the device you want to pair.
3. Find the position of Xblitz Pure Beast and select it. If the device asks for a password, enter 0000.
4. After successfully pairing, you will hear a message from the headphones.

After successful pairing, the devices will "remember each other" and connect each time they are within range.
Headphones can only be paired with one device at a time.

FAQ

1. Why can't I connect the headset to my phone?
   Check if the headset is in pairing mode.
   Check if Bluetooth connectivity on the phone is turned on. Remove the set from the list of devices visible in the phone and try pairing again.
2. Why can't I turn on the headset?
   Check the battery status.
3. Can I replace the headset battery?
   No, this headset uses a non-replaceable built-in lithium-ion battery.
4. Why does the headset break the phone connection despite keeping the distance between devices below 10 meters?
   Check whether there is any metal barrier between devices that may cause interference. Bluetooth is a radio communication technology sensitive to various types of objects near connected devices.
5. Why can't I hear the sound from a paired computer / phone?
   Check if the audio output selected in the computer is a bluetooth device and if the computer supports the A2DP profile. Also check the volume level set in the connected computer / phone.
6. Why can't I control the volume / selection of songs on my phone from the headset level?
   The settings of the music application used in the phone may not be able to control the music playback with the headset.

IMPORTANT SAFETY INSTRUCTIONS

1. Keep the device away from heat, sunlight, moisture, water and other liquids.
2. Do not expose the device to extremely high or low temperatures, as this may damage the battery.
3. Do not use the device if it has got wet or damp to avoid electric shock or damage to the device.
4. Do not use the device if it has been dropped from a great height or damaged in any other way.
5. Electrical equipment repairs should be carried out by a qualified specialist. Improper repairs can put you at serious risk.
6. Use the device only as intended.
7. The device is not a toy, keep it away from children.
8. Only use chargers with a 5V charging current (do not connect directly to a 220 / 230V socket).

Failure to follow the instructions may result in damage or in extreme cases, may lead to ignition.

HEADSET SPECIFICATION

Bluetooth: V4.2
Bluetooth chip: JL
Bluetooth range: ≥10m
Battery: lithium-ion 400mAh
Speaker: 40mm
Sensitivity: 110±3db
Impedance: 64Ω
Working time in music listening mode: Up to 10h
Charging time: about 2.5 hours
Standby mode: up to 200h
Frequency range: 20 ~ 22000 Hz

WARRANTY / CLAIMS

This product is covered by a 24-month warranty. The warranty conditions are available on the website: https://xblitz.pl/warranty/
Complaints should be submitted with the complaint form which can be found at http://reklamacje.kgktrade.pl/
Contact details and the address of the service can be found on the website: www.xblitz.pl
KGK Trade declares that this device XBLITZ Pure Beast is compliant with significant requirements of directive 2014/53/EU. The text of this declaration may be found on the website: http://xblitz.pl/download/DOC/deklaracja-CE-Xblitz-Pure-Beast.pdf

KGK TRADE sp. z o.o. sp. k.
Ujastek 5B,
31-752 Cracow, Poland Made in P.R.C.