Firmware Upgrade Notice - Skyrc D200neo Instruction Manual

SKYRC D200 neo Instruction Manual

Firmware Upgrade Notice

To recover from a firmware upgrade failure, please follow these steps:
1. Press and hold the Scroll button, then connect the power cord; D200 neo will power on
with a blue screen notice.
2. Connect D200 neo to your computer via a Type-C USB cable;
3. Launch the Charger Master on your computer;
4. When the status shows CONNECTED, click to check for new firmware;
5. Click to upgrade after detecting a new firmware;
6. Wait for the progress bar to finish and reach 100%; The process takes about 5 minutes.
25. SKYRC D200 neo