Master Link Gateway Protocol Settings - Bang & Olufsen 1798 Service Manual

4.6 Adjustments

Master Link Gateway Protocol settings

ML Gateway protocol is available on
RS232 connection and as TCP socket
connections (ethernet RJ45).
Multiple simultaneous ML Gateway
protocol connections are supported.
The options available are:
- Availability and bit rate on RS232
port.
- Availability and TCP port number on
the network connection.
! If the RS232 port is already configured
for another device, a message will be
shown and selection will be disabled.
! If RS232 is enabled for MLGW
protocol, the product can not be used
with eg.Conson and KNX installation.
The default Master Link Gateway
Protocol settings are:
 Enable MLGW protocol over IP
IP port
 Enable MLGW protocol over RS232
RS5232 bit rate
9000
9600 bps