VonHaus 3007725 Instruction Manual page 10

MAINTENANCE / ENTRETIEN / INSTANDHALTUNG / MANTENIMIENTO / MANUTENZIONE
If the Steam Cleaner begins to produce steam alot slower than usual, or stops producing steam altogether, you may
have to remove limescale.
To do so, prepare a soluition of 1/3 white vinegar and 2/3 tap water.
Use the Measuring Cup and Funnel, and pur the solution into the Unit.
Attach the Safety Cap securely and position the Unit into a sink or bucket.
Connect to a suitable mains outlet and allow to heat up. Switch on to begin producing steam until all of the solution is
used up. Repeat these steps as many times as it takes for the normal steam flow rate to be achieved.
Fill with fresh, clean water and rinse thoroughly.
Refill with clean water and release the steam through the system until empty.
CAUTION! AVOID submerging the Unit in water to clean.
Over time, some attachments may also become clogged with limescale, we recommend following the above steps with
an attachement secured to the Unit to help clean them.
Detach and rinse under clean, warm water.
Allow them to completely dry before storing in a cool dry place out of reach of children.
The Cloth accessory can be hand washed and hung out to dry before next use.
A5P | 01