Setting The Boot Options - Epson Endeavor Pro User Manual

Con figuring PCI devices
PC1 Devices
Select
screen to configure the devices connected to the PC1 option
slots in your computer. These options need to be set only if you
installed older PC1 devices that do not follow PC1 version 2.0
specifications.
N o t e
If you installed PC1 option cards in the computer before
running SETUP, the computer configures the
Devices
information returned from the PC1 option cards.
The Slot #l
whether the device is a master or not, and select the timer
values for devices in slots 1 and 2.

Setting the Boot Options

When you select
see the Boot Options screen, which allows you to define the
drive boot sequence and determine which power-on diagnostic
tests the computer performs when you start your system.
The
SETUP
display of the message
appears when you turn on or reset your computer. If you
disable the message, you can still press Del to start SETUP. The
default setting is
The Boot sequence
the computer checks the drives for an operating system when
you turn it on or reset it.
2-12 Running SETUP and Installing Drivers
from the Advanced System Setup
options automatically by detecting the
and Slot #2
Boot Options
prompt option allows you to enable or disable
press
Enabled.
option determines the order in which
options allow you to specify
from the Main Menu, you
to run
DEL
PC1
that
SETUP